2. Fire Magic
  3. Electric Grill Rotisserie Kit

Fire Magic Electric Grill Rotisserie Kit User manual

  • Hello! I am an AI chatbot trained to assist you with the Fire Magic Electric Grill Rotisserie Kit User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
REV 1 - 2005060720
L-C2-370
1
INSTALLER: Leave these instructions with consumer.
CONSUMER: Retain for future reference.
ROBERT H. PETERSON CO. • 14724 East Proctor Avenue • City of Industry, CA 91746
ELECTRIC GRILL
ROTISSERIE KIT
1
2
3
4
5
3604S
Rotisserie kit for
Island Bundle, Countertop, and Post
Patio Mount Electric Grills
Item Description Qty.
1. Rotisserie motor 1
2. Rotisserie rod 1
3. Rotisserie knob 1
4. Meat holder (pair) 1
5. Mounting bracket (two sizes) 2
MODEL # 3604S
3621
3604S Rotisserie kit shown
1
4
5
6
7
3621
Rotisserie kit for
Custom Model Electric Grills
Item Description Qty.
1. Rotisserie motor 1
2. Power supply 1
3. Motor adapter 1
4. Rotisserie rod 1
5. Rotisserie knob 1
6. Meat holder (pair) 1
7. Mounting bracket 1
3
2
This rotisserie kit is for use with Fire Magic Electric Grills only. See below for your specific model parts
list and the reverse side of this sheet for installation information.
REV 1 - 2005060720
L-C2-370
2
MOUNTING BRACKET SETUP
1. Using a Phillips screwdriver; remove the 2 screws
located towards the rear, left side of the electric grill.
2. Locate the mounting bracket for your installation.
See Fig. 2-1 and the following information for the
correct bracket.
6304S includes 2 mounting brackets:
• Small bracket - For countertop and Post Patio
Mount models
• Large bracket - For Island Bundle models
6321 includes 1 mounting bracket:
• Large bracket - For Custom models
3. Align the holes of the rotisserie bracket with the
exposed screw holes on the grill. Using the screws
from step 1, fasten the bracket to the grill (see Fig.
2-2).
Note: For Custom and Island Bundle models, the
mounting bracket need to be inserted through
the slot on the grill hanger.
4. Slide the rotisserie motor onto the bracket (see
Fig. 2-3).
Reference the Electric Grill owner's manual for details
on how to setup the grill for rotissing, loading the
rotisserie rod, and overall use.
Fig. 2-2 Install bracket
Fig. 2-1 Select mounting bracket
For Island Bundle
and Custom models
For Countertop
and Post Patio
Mount models
Fig. 2-3 Install rotisserie motor
(3604S shown)
(3604S shown)
/