PAV-VOMVP1F/PAV-VOMVP1C | 009-1481-02 |
190313 | Copyright 2019 Savant Systems, LLC
45 Perseverance Way, Hyannis, MA 02601
Savant.com | 508.683.2500
2 of 2
Item Description
Power Input 12V DC
HDMI Out
output.
Supports HDMI 2.0a
content.
Optical In
or
10G input from the Audio/Video over IP switch.
SFP+ (PAV-VOMVP1F)
RJ-45 (PAV-VOMVP1C)
RS-232
devices. For pin-out information, refer to the
signals via an IR Flasher (5V tolerant) to devices
with an IR input or IR receiver
commonly used to connect any network
compliant device to transmit its data onto the
link. 8-pin RJ-45 female connection.
IMPORTANT!
network switch.
Link LED
Solid Orange
O
Link Activity
LED
Green Blinking - Indicates data activity.
O
Audio Out
3.5 mm Analog Audio Output.
Requires HDMI input PCM audio format for any
switching device.
Direct Line Level 2.1 VRMS Output.
Vinci 8.9 or higher.
A
B
C
D
E
F
G
H
I
J
Rear Panel Wiring and Connections
IR connection are made using 3.5 mm IR
Emitter supplied with the device.
IR Wiring
Serial control connection are made
using a 4-pin Control Connector
into the hole and locks with a screw
located at the top of the connector.
RS-232 Wiring
Transport Distance
Optical In (PAV-VIMVP1F)
Additional Information
Refer to the following documents located on the Savant Customer
Community for additional information.
– Savant Audio/Video over IP Deployment Guide (009-1551-xx)
–
(009-1552-xx)
RJ-45 10G Ethernet connection.
Transport Distance
Cat6 100ft (30m)
Cat6a 300ft (100m)
Cat7 300ft (100m)
10 GbE (PAV-VOMVP1C)
Installation
ensure enough air can pass though the grooves on the top of the unit.
Savant Audio/Video over IP Deployment Guide on the Savant
Customer Community.
Power
Input
HDMI
Output
10G
Input
B
D
E
F
G
H
A
C
I
J
GRXTX12V
432
1
PIN
PIN
PIN
PIN
1
2
3
4
12V Do Not Use
Transmit
Receive
Ground