Liberty D688SEC-W-TX Installation guide

Liberty
Brand
Liberty
Model
D688SEC-W-TX
Type
Installation guide

Liberty D688SEC-W-TX Drawer Slide Sockets

The Liberty D688SEC-W-TX Drawer Slide Sockets are designed to make installing drawer slides quick and easy. These sockets are compatible with Liberty D663 and D688 drawer slides, which are designed for use with face-frame cabinets.

The sockets are made of durable steel and feature a white finish. They come with all the necessary hardware for installation, including screws and instructions.

The D688SEC-W-TX Drawer Slide Sockets are a great way to add convenience and functionality to your cabinets. They are easy to install and adjust, and they will help your drawers open and close smoothly and quietly.

Liberty D688SEC-W-TX Drawer Slide Sockets

The Liberty D688SEC-W-TX Drawer Slide Sockets are designed to make installing drawer slides quick and easy. These sockets are compatible with Liberty D663 and D688 drawer slides, which are designed for use with face-frame cabinets.

The sockets are made of durable steel and feature a white finish. They come with all the necessary hardware for installation, including screws and instructions.

The D688SEC-W-TX Drawer Slide Sockets are a great way to add convenience and functionality to your cabinets. They are easy to install and adjust, and they will help your drawers open and close smoothly and quietly.

MANUFACTURING CORPORATION
®
REV 6/16/2015CP2434408 ©2015 Liberty Hardware Manufacturing Corporation, A MASCO COMPANY
R
R
F
G
H
x6
A
Ex12
B
D
C
A
Ex12
B
D
C
REQUIRED TOOLS / OUTILS REQUIS /
HERRAMIENTAS NECESARIAS
D663
D688
#6 x 5/8" Pan Head Particle Board Screws
Vis à tête cylindrique bombée pour
panneau de particules n°6 x 5/8 po
Tornillos #6 x 5/8" de cabeza plana para
madera aglomerada
European Drawer Slide Sockets
Embouts pour coulisses européennes de tiroir
Soportes europeos para corredera de cajón
INCLUDES / COMPREND / INCLUYE
SOLD SEPARATELY / VENDU SÉPARÉMENT /
SE VENDEN POR SEPARADO
• For ease of installation, READ through
ALL instructions before you begin.
• Pour faciliter l’installation, LISEZ TOUTES
les instructions avant de commencer.
• Para facilitar la instalación, LEA TODAS
las instrucciones antes de comenzar.
IMPORTANT: Compatible with D663 and D688 drawer slides for face-frame cabinets.
IMPORTANT : Compatible avec les coulisses de tiroir D663 et D688 pour armoires à cadre en façade.
IMPORTANTE: Compatibles con las correderas de cajón D663 y D688 para gabinetes con marco frontal.
Follow instructions included with European Drawer Slides to
attach drawer members (B & D) to drawers.
Pour fixer les parties tiroir des coulisses (B et D) sur les tiroirs,
suivez les instructions fournies avec les coulisses européennes
de tiroir.
Siga las instrucciones que se incluyen con las Correderas
europeas para cajones para fijar los laterales del cajón (B y D) a
los cajones.
1
2
G
C
F
A
Place left socket (F) on left cabinet member (A) and right socket (G) on right
cabinet member (C).
Placez l'embout gauche (F) sur la partie armoire de la coulisse gauche (A) et
l'embout droit (G) sur la partie armoire de la coulisse droite (C).
Coloque el soporte izquierdo (F) en el lateral izquierdo del gabinete (A) y el
soporte derecho (G) en el lateral derecho del gabinete (C).
2
2
2
1
1-5/8"
(41.3 mm)
1-5/8"
(41.3 mm)
5/64"
(2 mm)
5/64"
(2 mm)
3
D
1
2
3
5
4
4
4
H x1
H x2
D
E
7
Z – 2-1/4"
(57.2mm)
ZZ
5 6
D663 D688
Mark 1-5/8" (41 mm). Align top of cabinet member (D) with mark,
5/64" (2 mm) from front of cabinet.
Faites une marque à 41 mm (1-5/8 po). Alignez le haut de la partie
armoire de la coulisse (D) sur la marque, à 2 mm de l'avant de
l'armoire.
Haga una marca a 41 mm (1-5/8"). Alinee la parte superior del lateral
del gabinete (D) con la marca, a 2 mm del frente del gabinete.
Secure front of drawer member with a screw (H). Make sure cabinet
member (D) is level; secure right socket (G) with screws (H).
Fixez l'avant de la partie tiroir avec une vis (H). Assurez-vous que la
partie armoire de la coulisse (D) est de niveau. Fixez l'embout droit
(G) à l'aide de vis (H).
Asegure el frente del lateral del cajón con un tornillo (H). Cerciórese
de que el lateral del gabinete (D) esté nivelado; asegure el soporte
derecho (G) con los tornillos (H).
Check alignment of drawer relative to the cabinet. Remove drawer
and adjust sockets (F & G) if necessary. Once final placement is
achieved, secure sockets with remaining screws (E).
Vérifiez l'alignement du tiroir par rapport à l'armoire. Retirez le tiroir
et réglez les embouts (F et G) si nécessaire. Une fois le placement
final réalisé, fixez les embouts avec les vis restantes (E).
Verifique la alineación del cajón en relación con el gabinete. Retire
el cajón y ajuste los soportes (F y G) de ser necesario. Cuando haya
logrado la colocación final, asegure los soportes con los tornillos
restantes (E).
Repeat Steps 3-4 for remaining cabinet member. Measure cabinet
opening; subtract 2-1/4" (57 mm) for distance between rear sockets.
Répétez les étapes 3 et 4 pour la partie armoi
re opposée. Mesurez
la largeur de l'ouverture de l'armoire. Soustraire 57 mm (2-1/4 po) qui
correspondent à la distance entre les embouts arrière.
Repita los pasos 3 y 4 para el otro lateral del gabinete. Mida la
apertura del gabinete; reste 57 mm (2-1/4") para calcular la distancia
entre los soportes traseros.
Place drawer member rollers over cabinet member rollers and insert
drawer into cabinet.
Placez les roulettes de la partie tiroir de la coulisse sur celles de la
partie armoire et insérez le tiroir dans l'armoire.
Coloque los rodillos del lateral del cajón
sobre los rodillos del lateral
del gabinete e introduzca el cajón en el gabinete.
  • Page 1 1
  • Page 2 2

Liberty D688SEC-W-TX Installation guide

Liberty
Brand
Liberty
Model
D688SEC-W-TX
Type
Installation guide

Liberty D688SEC-W-TX Drawer Slide Sockets

The Liberty D688SEC-W-TX Drawer Slide Sockets are designed to make installing drawer slides quick and easy. These sockets are compatible with Liberty D663 and D688 drawer slides, which are designed for use with face-frame cabinets.

The sockets are made of durable steel and feature a white finish. They come with all the necessary hardware for installation, including screws and instructions.

The D688SEC-W-TX Drawer Slide Sockets are a great way to add convenience and functionality to your cabinets. They are easy to install and adjust, and they will help your drawers open and close smoothly and quietly.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents