Liberty D66322C-W-TS Installation guide

Liberty
Brand
Liberty
Model
D66322C-W-TS
Type
Installation guide

This manual is also suitable for

Liberty D66322C-W-TS

Liberty D66322C-W-TS European Side Mount Drawer Slides are designed to provide smooth and reliable drawer operation in various cabinetry applications. With a weight capacity of 50 lbs per pair, these slides are suitable for drawers in kitchens, bathrooms, offices, and other residential or commercial settings. The 1/2" (13 mm) clearance on each side and 1/4" (7 mm) clearance for the bottom of the drawer allow for ample space for drawer movement. The 5/8" (16 mm) clearance for the top of the drawer ensures proper drawer alignment and prevents drawers from rubbing against the cabinet frame.

Liberty D66322C-W-TS

Liberty D66322C-W-TS European Side Mount Drawer Slides are designed to provide smooth and reliable drawer operation in various cabinetry applications. With a weight capacity of 50 lbs per pair, these slides are suitable for drawers in kitchens, bathrooms, offices, and other residential or commercial settings. The 1/2" (13 mm) clearance on each side and 1/4" (7 mm) clearance for the bottom of the drawer allow for ample space for drawer movement. The 5/8" (16 mm) clearance for the top of the drawer ensures proper drawer alignment and prevents drawers from rubbing against the cabinet frame.

MANUFACTURING CORPORATION
®
REV 7/13/2015CP2434411 ©2015 Liberty Hardware Manufacturing Corporation, A MASCO COMPANY
R
R
A
D
B
C
E
x12
#5 x 1/2" Flat Head Wood Screws
Vis à bois à tête plate n°5 x 1/2 po
Tornillos #5 x 1/2" de cabeza plana
para madera
REQUIRED TOOLS / OUTILS REQUIS /
HERRAMIENTAS NECESARIAS
European Side Mount Drawer Slides
Glissières europèennes de tiroir à montage latéral
Rieles de cajón de instalación lateral estilo europeo
1-5/8"
(41.3 mm)
1-5/8"
(41.3 mm)
13/16"
(20.6 mm)
13/16"
(20.6 mm)
1/4" (6.4 mm)
Min./Min. /Mín.
5/64"
(2 mm)
1/2"
(12.7 mm)
1/2"
(12.7 mm)
• 1/2" (13 mm) clearance on each side.
• 1/4" (7 mm) clearance for bottom of drawer.
• 5/8" (16 mm) clearance for top of drawer.
• 50 lb. capacity, per pair.
• Available in lengths of 18", 20", 22"
• Right side captive member (holds drawer in place).
• Dégagement de 13 mm de chaque côté.
• Dégagement de 7 mm au bas du tiroir.
• Dégagement de 16 mm en haut du tiroir.
• Capacité de 25 kg, par paire.
• Longueurs disponibles: 18 po, 20 po, 22 po
• Partie fixe côté droit (maintient le tiroir en place).
• Despeje de 1/2" (13 mm) a cada lado.
• Despeje de 1/4" (7 mm) para la parte inferior del cajón.
• Despeje de 5/8" (16 mm) para la parte superior del cajón.
• Capacidad de 25 k (50 lb) por par.
• Disponible en longitudes de 18", 20", 22"
• Lateral confinado del lado derecho (mantiene el cajón
en su lugar).
INCLUDES / COMPREND / INCLUYE
SPECIFICATIONS / SPÉCIFICATIONS / ESPECIFICACIONES
IMPORTANT: For face-frame cabinets, the D688 socket set is required.
IMPORTANT : Pour les armoires à cadre en façade, l'ensemble d'embouts D688 est nécessaire.
IMPORTANTE: Para los gabinetes con marco frontal, se requiere el conjunto de soportes D688.
• For ease of installation, READ through
ALL instructions before you begin.
• Pour faciliter l’installation, LISEZ TOUTES
les instructions avant de commencer.
• Para facilitar la instalación, LEA TODAS
las instrucciones antes de comenzar.
2
1
2
2
B
E x3
2
2
1
1
B
13/16"
(20.6mm)
13/16"
(20.6mm)
2
2
1
XX
5/64"
(2 mm)
5/64"
(2 mm)
4
C
3
2
A
B
XX
3
1
2
5
C
Ex3
1
Make sure drawer member (B) is level; secure with screws (E). Repeat Steps
1-2 for remaining drawer member (D).
Assurez-vous que la partie tiroir de la coulisse (B) est de niveau. Fixez à l'aide
de vis (E). Répétez les étapes 1 et 2 pour la partie tiroir opposée (D).
Cerciórese de que el lateral del cajón (B) esté nivelado; asegúrelo con los
tornillos (E). Repita los pasos 1 y 2 para el otro lateral del cajón (D).
Mark 13/16" (21 mm) from bottom of drawer. Align top of drawer member (B)
with mark.
Faites une marque à 21 mm (13/16 po) du fond du tiroir. Alignez le haut de la
partie tiroir de la coulisse (B) avec la marque.
Haga una marca a 21 mm (13/16") desde la parte inferior del cajón. Alinee la
parte superior del lateral del cajón (B) con la marca.
Mark "X" from bottom of mark. Align top of cabinet member (C) with mark,
5/64" (2 mm) from front of cabinet.
Marquer la distance "X" à partir de la marque du bas. Alignez le haut de la
partie armoire de la coulisse (C) sur la marque, à 2 mm de l'avant de l'armoire.
Haga una marca a la distancia "X" desde la marca de la parte inferior del
ca
jón. Alinee la parte superior del lateral del gabinete (C) con la marca, a 2 mm
del frente del gabinete.
Determine drawer position. Mark bottom of drawer front. Place cabinet
member (A) onto drawer member (B). Measure "X".
Déterminez la position du tiroir. Faites une marque au bas de l'avant du tiroir.
Placez la partie armoire de la coulisse (A) sur la partie tiroir (B). Mesurez la
distance "X".
Determine la posición del cajón. Marque la parte inferior del cajón. Coloque el
lateral del gabinete (A) sobre el lateral del cajón (B). Mida la distancia "X".
Make sure cabinet member (C) is l
evel; secure with screws (E). Repeat Steps
4-5 for remaining cabinet member (A).
Assurez-vous que la partie armoire de la coulisse (C) est de niveau. Fixez à
l'aide de vis (E). Répétez les étapes 4 et 5 pour la partie armoire de la coulisse
opposée (A).
Cerciórese de que el lateral del gabinete (C) esté nivelado; asegúrelo con los
tornillos (E). Repita los pasos 4 y 5 para el otro lateral del gabinete (A).
6
Place drawer member rollers over cabinet member rollers and insert drawer into
cabinet.
Placez les roulettes de la partie tiroir de la coulisse sur celles de la partie armoire
et insérez le tiroir dans l'armoire.
Coloque los rodillos del lateral del cajón sobre los rodillos del lateral del gabinete
e introduzca el cajón en el gabinete.
  • Page 1 1
  • Page 2 2

Liberty D66322C-W-TS Installation guide

Liberty
Brand
Liberty
Model
D66322C-W-TS
Type
Installation guide
This manual is also suitable for

Liberty D66322C-W-TS

Liberty D66322C-W-TS European Side Mount Drawer Slides are designed to provide smooth and reliable drawer operation in various cabinetry applications. With a weight capacity of 50 lbs per pair, these slides are suitable for drawers in kitchens, bathrooms, offices, and other residential or commercial settings. The 1/2" (13 mm) clearance on each side and 1/4" (7 mm) clearance for the bottom of the drawer allow for ample space for drawer movement. The 5/8" (16 mm) clearance for the top of the drawer ensures proper drawer alignment and prevents drawers from rubbing against the cabinet frame.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents