The Archer is a versatile overdrive/boost with amazing headroom that is designed to help you cut through the
mix. Please experiment with settings and be careful with the output….this dude is loud!
! Output: The volume control is very powerful and drives fairly hard relatively early. This allows
you to hit the front end of an amp or pedal to get very aggressive or crystal clear.
! Treble: The Treble control is a very effective EQ that goes from dark to a very “chimey”, bright
tone. It’s great to create that midrange clarity.
! Gain: The gain also acts as a mixer control between the clean boost and the gain. Turn the
gain all the way down and your output becomes the volume for all clean boost.
Start blending in the gain control and it will simultaneously reduce clean volume & introduce
gain…..somewhere in the middle is the sweet spot or mix of the two….experiment!!
NOTE: There is no goop to contend with.......;-)
All J. Rockett Audio Designs pedals operate off of the standard BOSS type 9 volt adapter or a single 9 volt
battery. The power input is a 5.5 mm x 2.1 mm jack with the positive voltage on the outer sleeve. Using an
external power supply will automatically disconnect the battery. Disconnect the input jack to preserve battery
life when not in use or when not used with an appropriate, external power supply.
2.1mm x 5.5 mm tip/negative plug