2. Computers & electronics
  3. Warranty & support
  4. Warranty & support extensions
  5. J ROCKETT AUDIO DESIGNS
  6. Hot Rubber Monkey V2
Hot Rubber Monkey V2

J ROCKETT AUDIO DESIGNS Hot Rubber Monkey V2 User manual

  • Hello! I've reviewed the user manual for the J. Rockett Audio Designs Hot Rubber Monkey V2 guitar pedal. This pedal is designed to emulate the overdriven sounds of a D-style amplifier and can also achieve Tube Screamer tones. It features controls for level, gain, top end, and midrange, as well as a true bypass footswitch. I'm ready to answer any questions you have about this device.
  • What type of power supply should I use?
    What does the 'LEVEL' control do?
    What does the 'GAIN' control do?
The HRM V2 is designed to achieve the overdriven sounds of a D style amp with the HRM EQ mod" This
EQ mod creates a very low-mid centric throaty sound where the guitar frequencies live" The touch
sensitivity and quickness gives the effect of immediacy and cuts through the mix.
For this V2 version we were able to spend about a 2 years living with an actual Dumble Amplifier with
the HRM EQ mod. This allowed us to really drill down on the subtle nuances to make an even better
version than the previous HRM. This pedal, even at lower gain settings, will bloom and feedback making
it feel like the real thing. We found some very nice NOS parts that enhance the authenticity of the V2
version and most importantly it makes it fun to play.
One of the great happy accidents is the pedal can achieve some of THE best Tube Screamer sounds you
could ask for with more control over the EQ.
Hot Rubber Monkey
GAIN
Controls the amount
of gain and is very
interactive with the
volume control
MIDRANGE
Controls the
important “guitar”
midrange t control
the thick low mids.
LEVEL
Controls the overall
output and is very
interactive with the
gain control
TOP END
Controls the top end
and helps tweak the
amount of bite in
contrast to the low
mids.
FOOT SWITCH
Turns the pedal on
and off. True Bypass
POWER
9VDC negative
center. DO NOT USE
ANYTHING OTHER
THAN A 9VDC
NEGATIVE CENTER
SUPPLY.
Warranty
Rockett Pedals LLC. will repair or replace, at its discretion, defective workmanship or materials on all new Rockett
Pedals products directly or through; the selling dealer or an authorized service technician, for one year from the
date of purchase at no cost to the original purchaser.
Repair and replacement parts installed will be warranted for the unexpired portion of the original
warranty term.
Before sending product in for repair please contact us at jay@rockettpedals.com. Or call +1 (720) 936-8623. This
warranty does not cover shipping costs, product appearance or damages caused by accident, abuse, misuse or
alteration.
A dated sales slip or order number (issued by a tech, dealer or Rockett Pedals) must accompany a product being
returned for warranty service. Repairs without a return authorization number will be refused. Please allow 4 weeks
for warranty service. For more information please contact Rockett Pedals www.rockettpedals.com or +1 (720)
936-8623.
No other warranty is expressed or implied.
/