Rogers 763S Owner's manual

Sierra Wireless

Mobile Hotspot

AirCard

®

763S

www.sierrawireless.com

QUICK START GUIDE

GUIDE DE DÉMARRAGE RAPIDE

1

External RF

antenna connector

Also in the box:

• Lithium ion battery

• Wall charger

• USB cable

Get to Know Your Device

WPS button

micro USB port

Power key

External RF

antenna connector

Navigation key

LCD screen

Buttons & keys

Lock the mobile hotspot Press and hold the Navigation key

for 3 seconds.

Unlock the mobile

hotspot

Press and release any key. Press

the Power key to conﬁ rm.

Mute / unmute the audio

alerts

• Press and hold WPS button and

Navigation key for 3 seconds, or

• Press the Navigation key to go

to the Messages / Alerts LCD

screen and follow the prompts.

Reset the device to

factory settings

Press and hold the WPS button

and Power key for 5 seconds and

follow the LCD on-screen prompts.

2

English

Status icons

Signal strength

Network technology

Messages

Battery

Wi-Fi on or off

(View at http://rogers.hotspot)

The number indicates

the number of devices

connected.

Your Device LCD Screen

GPS ﬁ nding ﬁ x or tracking

Press the Navigation key to cycle through the following

screens:

• Connect Info (Wi-Fi SSID and Wi-Fi Passphrase)

• WPS Setup

• Messages/Alerts

• Data Usage/Billing Info

• Device Info/About

Homepage URL

Operator name

Data usage information

Rogers

SSID: AirCard-xxxx

Wi-Fi Passphrase: 12345678

To conĮŐƵre yŽƵƌŚŽƚƐƉŽƚ

LT E

ŐŽƚŽŚƩƉ͗ͬͬƌŽŐĞƌƐ͘ŚŽƚƐƉŽƚ

21

7

6543

8

10

11

1

2

3

4

5

6

7

8

11

9

Wi-Fi SSID

9

10

3

Step 1: Set up Device

Your AirCard Mobile Hotspot comes with the battery partially

charged. When you need to recharge the battery, use the USB

cable to attach the hotspot to:

• A wall socket, using the AC adapter (fastest option)

• The USB port on your laptop

1. Slide the SIM card under the cover, as shown in the

illustration.

2. Insert the battery as shown in the illustration. (The battery

installs easily. If it does not go in easily, check the orientation.

Do not force it.)

3. Replace the back cover.

Gold contacts

Battery

4

1. Press and hold the P

ower key for a

few seconds. Once powered up, the

mobile hotspot automatically connects

to the mobile broadband network.

The ﬁ rst time you turn on the mobile

hotspot, you’ll be asked to select a language on the LCD.

After that, you can change the language on the homepage.

2. The LCD screen displays the message “Connect your

computer to Wi-Fi network” and shows you the Wi-Fi SSID

(Network name) and Wi-Fi Passphrase.

3. On your computer or mobile device, open your Wi-Fi /

network connection manager.

4. Select the Wi-Fi SSID displayed on the LCD screen.

5. When prompted, enter your Wi-Fi Passphrase, as it appears

on the LCD screen.

When the computer or mobile device connects to the mobile

hotspot, a ‘1’ appears beside the Wi-Fi icon on the LCD

screen.

6. Launch your browser and, if desired, go to http://rogers.

hotspot to personalize your settings. (Note: The mobile

hotspot is completely secured using its default security

settings.)

7. Optional step: Depending on your service provider, you may

need to create a proﬁ le to connect to the mobile broadband.

Follow the instructions on page 10.

Note: The LCD screen goes into sleep mode to save power. To

wake up the LCD screen, press and release the Power key.

Step 2: Connect to the

Internet

Rogers

SSID: AirCard-xxxx

go to ŚƩƉ͗ͬͬƌŽŐĞƌƐ͘ŚŽƚƐƉŽƚ

To c onĮŐƵre yŽƵƌŚŽƚƐƉŽƚ

5

Security Credentials

Wi-Fi Passphrase

• Use to connect a wireless device to your Wi-Fi network

• The Wi-Fi Passphrase is shown on the LCD screen.

Admin Password

• Your default Admin Password is swiadmin.

• Use this password to log in to the AirCard Homepage and

make changes such as enabling GPS or changing your

security settings.

The default Wi-Fi Passphrase and Admin Password are printed

on the label under the battery.

Reset the Wi-Fi Passphrase and Admin

Password

To reset your device to the default settings:

1. Press and hold the WPS button and the Power key for

5 seconds.

2. When prompted, press the Power key.

3. Reconnect your Wi-Fi devices.

Note: If you change your Wi-Fi Passphrase, you may need to

update the saved information in your laptop’s Wi-Fi / network

connection manager.

AirCard Watcher app

Download the complimentary AirCard Watcher app from

www.sierrawireless.com/AirCardApps.

Use this app to view your connection, set-

tings, and data usage from your smartphone

or tablet. To manage all hotspot settings, go

to the homepage (http://rogers.hotspot).

6

Mobile Hotspot Homepage

To access your mobile hotspot homepage, connect to your

device, and in your browser, enter http://rogers.hotspot. Log in

with your Admin Password (swiadmin) to modify settings.

Note: Alternatively, you can enter the device IP address

http://192.168.1.1

On the homepage, you can:

• Change the SSID, Wi-Fi Passphrase, Admin Password, and

Wi-Fi encryption

• Set autoconnect options

• Set GPS options

• Use GPS to map or track your location and ﬁ nd nearby

amenities

• View data usage

• Set audio alerts

• View and change other settings

• Check device status

7

Check Your Data Usage

You have two options to view an estimate of your data usage.*

On the mobile hotspot LCD Dashboard:

1. Press the Navigation key to cycle through the screens. The

billing information screen shows your data usage.

Billing Info

Data used from: 2011/06/18

Data transferred: 4.23 MB*

Cycle restarts: 2011/07/01

ĂǇƐůĞŌ͗ϭϮĚĂǇƐ

* approximate

On the Homepage:

1. Go to http://rogers.hotspot.

2. Click the Session Data icon.

3. Optionally, set the billing cycle to match your data plan’s

billing date.

* Not accurate for billing purposes.

8

Connect Other Devices

Connect additional Wi-Fi capable devices:

1. Open the Wi-Fi network manager on your computer or other

Wi-Fi device (smartphones, tablets, media players, cameras,

etc.).

2. Select the mobile hotspot Wi-Fi network displayed on the

LCD screen (for example, AirCard-xxxx).

3. Enter the Wi-Fi Passphrase displayed on the LCD screen and

launch your browser.

Connect WPS Devices

WPS enables you to connect WPS-enabled devices to a Wi-Fi

network without the use of a keyboard. The WPS feature is

available on certain cameras, printers, smartphones, and

laptops.

1. Press the WPS button on your mobile hotspot.

2. Within 2 minutes, press the WPS button on the wireless

device you want to connect.

Your mobile hotspot and the wireless device will communicate

and establish the connection.

Use GPS

To view your GPS location:

1. Go to the AirCard Homepage (http://rogers.hotspot).

2. Log in as Administrator.

3. Click the GPS icon.

4. Click Get GPS Location (one-time) or Start GPS Tracking

(continuous).

5. To view your location on a map and search for nearby

amenities, click Map Me.

Reconnect to the Mobile

Broadband Network

By default, the mobile hotspot automatically connects to the

mobile broadband network. (When you are connected to the

mobile broadband network, the technology icon on the LCD

screen has a white background.)

If you need to reconnect to the mobile broadband network

manually, do one of the following:

• With the LCD main screen showing, press the Power key and

follow the on-screen prompts.

• Press the Navigation key repeatedly until you see the

Connect Info LCD screen, and follow the on-screen prompts.

• On the homepage, click the Connect button under the virtual

image of the mobile hotspot.

You can disconnect from the mobile broadband network from the

Connect Info LCD screen or the homepage. Powering off the

device also disconnects it from the mobile broadband network.

9

10

Create a proﬁ le

If you need to create a proﬁ le:

1. Go to the AirCard Homepage (http://rogers.hotspot).

2. Log in as Administrator.

3. Go to Advanced Settings > WAN > Setup.

4. Click Add / Edit Proﬁ les.

5. Enter the information supplied by your service provider, and

click Save.

Frequently Asked Questions

How do I enter the PIN code on my SIM card?

If your service provider gave you a PIN for your SIM card:

1. Connect your computer to the mobile Wi-Fi network using the

credentials printed on the label under the battery.

2. Go to the homepage (http://rogers.hotspot).

3. Enter your Admin Password in the Admin Login ﬁ eld and click

login. (Default Admin Password is swiadmin)

4. When prompted, enter the SIM PIN and click Submit.

More Information

• Online Help — From the homepage, click the Help icon and

select Online Help.

• On the Internet — Additional support is available online at

www.sierrawireless.com/Support/Downloads.aspx

Caution: The Sierra Wireless Mobile Hotspot must be 1 cm

or more from users during operation. If an external antenna

is used, the antenna must be maintained at least 20 cm from

users during operation. Use only the external antennas avail-

able from Sierra Wireless. (See www.sierrawireless.com/en/

productsandservices/AirCard/Accessories.aspx#AirCard

Accessories.)

11

Page is loading ...

Rogers 763S, AC763S, AirCard, AirCard 763S Owner's manual

Other documents