Page is loading ...
45661105
Edition 2
September 2009
Save These Instructions
Product Information
Cut-O Air Tool
Model 326G
EN
Product Information
Especicaciones del producto
Spécications du produit
ES
FR
2 45661105_ed2
4
7
5
3
2
1
9
48h
8h
6
24h
PMAX
8
9
(Dwg. 16616781)
1
3
2
5
6
9
IR # - NPT inch (mm) NPT IR #
C38121-600-VS 3/8 (10) 1/4 50
45661105_ed2 EN-1
EN
Product Safety Information
Intended Use:
This Cut-O Air Tool is designed for cutting plastics, berglass, composites and metals.
For additional information refer to Product Safety Information Manual Form 45661436.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model
Free
Speed
Wheel
Type
Wheel
Diameter
Maximum
Wheel Thickness
Guard Part
Number
Average Air
Consumption
rpm inch mm inch mm cfm l/min
326G 20000 41 3 76 1/8 3.2 326G-A931 6 170
Model
Air Consumption @ Load Tool Weight Overall Length
Sound Level dB (A)
(ISO15744)
cfm I/min lbs kg inch mm † Pressure (L
p
) ‡ Power (L
w
)
326G 25 708 2.4 1.09 7.7 196 94.3 105.3
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16616781 and table on page 2. Maintenance frequency is shown in
circular arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 6. Thread size
2. Regulator 7. Coupling
3. Lubricator 8. Safety Air Fuse
4. Emergency shut-o valve 9. Oil
5. Hose diameter
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
www.ingersollrandproducts.com
© 2009 Ingersoll Rand Company
/