Ingersoll Rand 7812G User manual

Ingersoll Rand
Brand
Ingersoll Rand
Model
7812G
Type
User manual

Ingersoll Rand 7812G Air Shear is designed to cut steel, aluminum, tin, and other materials up to 20 gauge (1 mm) thick. It is a powerful tool with a maximum capacity of 20 gauge and a strokes per minute (spm) of 5,500. The 7812G is also lightweight and easy to use, weighing only 2.8 lbs (1.27 kg). With an overall length of 9.4 inches (239 mm), it is also compact and easy to maneuver. The 7812G is a versatile tool that can be used for a variety of applications, including cutting sheet metal, trimming excess material, and making precise cuts.

Ingersoll Rand 7812G Air Shear is designed to cut steel, aluminum, tin, and other materials up to 20 gauge (1 mm) thick. It is a powerful tool with a maximum capacity of 20 gauge and a strokes per minute (spm) of 5,500. The 7812G is also lightweight and easy to use, weighing only 2.8 lbs (1.27 kg). With an overall length of 9.4 inches (239 mm), it is also compact and easy to maneuver. The 7812G is a versatile tool that can be used for a variety of applications, including cutting sheet metal, trimming excess material, and making precise cuts.

04579660
Edition 2
October 2009
Save These Instructions
Product Information
Air Shear
7812G
EN
Product Information
Especicaciones del producto
Spécications du produit
ES
FR
2 04579660_ed2
4
7
5
3
2
1
9
6
11
9
8
10
24h
48h
24h
24h
PMAX
(Dwg. 16573818)
1
3
2
5
6
7
9
IR # - NPT inch (mm) NPT IR # IR # IR # cm
3
IR # cm
3
C38121-600-VS 3/8 (10) 1/4 MSCF32 10 28 3 28 3
04579660_ed2 EN-1
EN
Product Safety Information
Intended Use:
These Air Shear are designed to cut steel, aluminum, tin and other materials
up to 20 gauge (1 mm).
For additional information refer to Air Shear Product Safety Information Manual
Form 04580494.
Manuals can be downloaded from www.ingersollrandproducts.com.
Product Specications
Model Maximum Capacity
Strokes Per Minute Tool Weight Overall Length
spm lbs Kg in mm
7812G 20 gauge 5,500 2.8 1.27 9.4 239
Model
Average Air
Consumption
Air Consumption
@ Load
Sound Level dB (A)
(ISO15744)
Vibration Level
(ISO8662)
cfm l/min cfm l/min † Pressure (L
p
) ‡ Power (L
w
) m/s
2
7812G 4 113 29 825 83.0 94.0 0.5
† K
pA
= 3dB measurement uncertanity
‡ K
wA
= 3dB measurement uncertanity
Installation and Lubrication
Size air supply line to ensure tool’s maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air lter and compressor tank daily. Install
a properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any
hose coupling without internal shut-o, to prevent hose whipping if a hose fails or coupling
disconnects. See drawing 16573818 and table on page 2. Maintenance frequency is shown in
circular arrow and dened as h=hours, d=days, and m=months. Items identied as:
1. Air lter 7. Coupling
2. Regulator 8. Safety Air Fuse
3. Lubricator 9. Oil
4. Emergency shut-o valve 10. Grease - during assembly
5. Hose diameter 11. Grease - through tting
6. Thread size
Parts and Maintenance
When the life of the tool has expired, it is recommended that the tool be disassembled,
degreased and parts be separated by material so that they can be recycled.
The original language of this manual is English.
Tool repair and maintenance should only be carried out by an authorized Service Center.
Refer all communications to the nearest Ingersoll Rand Oce or Distributor.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
www.ingersollrandproducts.com
© 2009 Ingersoll Rand Company
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8

Ingersoll Rand 7812G User manual

Ingersoll Rand
Brand
Ingersoll Rand
Model
7812G
Type
User manual

Ingersoll Rand 7812G Air Shear is designed to cut steel, aluminum, tin, and other materials up to 20 gauge (1 mm) thick. It is a powerful tool with a maximum capacity of 20 gauge and a strokes per minute (spm) of 5,500. The 7812G is also lightweight and easy to use, weighing only 2.8 lbs (1.27 kg). With an overall length of 9.4 inches (239 mm), it is also compact and easy to maneuver. The 7812G is a versatile tool that can be used for a variety of applications, including cutting sheet metal, trimming excess material, and making precise cuts.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents