Kichler Lighting 43872OZ User manual

Type
User manual

This manual is also suitable for

Kichler Lighting 43872OZ is a customizable light fixture designed for easy installation and adjustment. With its adjustable arms and stems, you can create the perfect lighting arrangement for your space. The fixture comes with a variety of stem lengths, allowing you to customize the height of the fixture to suit your needs. The fixture also includes a loop for hanging a chain or cord, giving you even more flexibility in your installation options. The fixture is easy to wire and connect, and the included instructions provide clear and concise guidance on the installation process.

Kichler Lighting 43872OZ is a customizable light fixture designed for easy installation and adjustment. With its adjustable arms and stems, you can create the perfect lighting arrangement for your space. The fixture comes with a variety of stem lengths, allowing you to customize the height of the fixture to suit your needs. The fixture also includes a loop for hanging a chain or cord, giving you even more flexibility in your installation options. The fixture is easy to wire and connect, and the included instructions provide clear and concise guidance on the installation process.

Date Issued: 04/11/16 IS-43872-US
SEE OTHER SIDE FOR SPANISH TRANSLATIONS.
VEA EL OTRO LADO DE TRADUCCIONES AL ESPAÑOL.
We’re here to help 866-558-5706
Hrs: M-F 9am to 5pm EST
1) Rotate fixture arms and space equally apart from each other.
2) Select desired length stem from (2) 6” and (2) 12” long
stems. Pass wires thru short threaded pipe and selected
stem. Screw pipe/stem into coupling using thread lock-
ing compound. Tighten to secure. Repeat as needed for
desired length of stem for desired fixture height.
NOTE: Thread locking compound must be applied to all
stem threads as noted with symbol to prevent ac
cidental rotation of stems during cleaning, relamping,
etc.
3) Pass wire thru short threaded nipple. Screw nipple into
last stem using thread locking compound. Pass wires thru
threaded hole in loop and thread loop to end of nipple using
thread locking compound. Tighten to secure.
4) TURN OFF POWER.
a) IMPORTANT: Before you start, NEVER attempt any work
without shutting off the electricity until the work is done.
b) Go to the main fuse, or circuit breaker, box in your
home. Place the main power switch in the “OFF”
position.
c) Unscrew the fuse(s), or switch “OFF” the circuit breaker
switch(s), that control the power to the fixture or room
that you are working on.
d) Place the wall switch in the “OFF” position. If the fixture
to be replaced has a switch or pull chain, place those in
the “OFF” position.
5) Take threaded nipple from parts bag and screw in screw
collar loop a minimum of 6 mm (1/4”). Lock into place with
hexnut.
6) Run another hexnut down threaded nipple almost touching
first hexnut. Now screw threaded pipe into mounting strap.
Mounting strap must be positioned with extruded thread
faced into outlet box. Threaded nipple must protrude out
the back of mounting strap. Screw third hexnut onto end of
threaded nipple protruding from back of mounting strap.
7) Connect mounting strap to outlet box.
8) Unscrew the threaded ring from screw collar loop. Take
canopy and pass over screw collar loop. Approximately
one half of the screw collar loop exterior threads should be
exposed. Adjust screw collar loop by turning assembly up or
down in mounting strap. Remove canopy.
9) After desired position is found, tighten both top and bot-
tom hexnuts up against the bottom and top of the mounting
strap.
10) Slip canopy over screw collar loop and thread on threaded
ring. Attach chain (with fixture connected) to bottom of
screw collar loop. Close chain link ends together using
chain pliers or padded pliers to prevent damage to finish.
Unscrew threaded ring, let canopy and threaded ring slip
down.
11) Pass wire through threaded ring, canopy, screw collar loop,
threaded pipe and into outlet box.
12) Grounding instructions: (See Illus. A or B)
A) On fixtures where mounting strap is provided with a
hole and two raise dimples. Wrap ground wire from
outlet box around green ground screw, and thread into
hole.
B) On fixtures where a cupped washer is provided. Put
ground wire from outlet box under cupped washer
and green ground screw and thread screw into hole in
mounting strap.
If fixture is provided with ground wire. Connect fixture
ground wire to outlet box ground wire with wire connector,
after following the above steps. Never connect ground wire
to black or white power supply wires.
GREEN GROUND
SCREW
CUPPED
WASHER
OUTLET BOX
GROUND
FIXTURE
GROUND
DIMPLES
WIRE CONNECTOR
OUTLET BOX
GROUND
GREEN GROUND
SCREW
FIXTURE
GROUND
A
B
13) Make wire connections. Reference chart below for correct
connections and wire accordingly.
14) Raise canopy to ceiling.
15) Secure canopy in place by tightening threaded ring onto
screw collar loop.
Connect Black or
Red Supply Wire to:
Connect
White Supply Wire to:
Black White
*Parallel cord (round & smooth)
*Parallel cord (square & ridged)
Clear, Brown, Gold or Black
without tracer
Clear, Brown, Gold or Black
with tracer
Insulated wire (other than green)
with copper conductor
Insulated wire (other than green)
with silver conductor
*Note: When parallel wires (SPT I & SPT II)
are used. The neutral wire is square shaped
or ridged and the other wire will be round in
shape or smooth (see illus.)
Neutral Wire
OUTLET BOX
CAJA DE SALIDA
WIRE CONNECTORS
CONCTORS
DE ALAMBRE
STRAP MOUNTING SCREWS
TORNILLO DE
MONTAJE DE LA ABRAZADERA
HEXNUT
TUERCA
HEXAGONAL
THREADED PIPE
TUBO ROSCADO
SCREW COLLAR LOOP
ANILLO DE
CUELLO ROSCADO
CHAIN LINK
(CRIMP CLOSED
AFTER LINK IS
THRU BOTH LOOPS)
ACOPLAMIENTO DE CADENA
(ENGARZADO CERRADA
DESPUÉS DE LA RELACIÓN ES
A TRAVÉS DE AMBOS BUCLES)
LOOP
ANILLO
SHORT THREADED NIPPLES
NIPLES DE ROSCADAS CORTA
STEM
TALLO
SHORT THREADED NIPPLES
NIPLES DE ROSCADAS CORTA
COUPLING
DE ACOPLAMIENTO
ROTATE ARMS - SPACED EQUALLY
GIRE LOS BRAZOS - ESPACIADOS IGUALMENTE
BULBS
(NOT INCLUDED)
BOMBILLAS
(NO INCLUIDO)
  • Page 1 1
  • Page 2 2

Kichler Lighting 43872OZ User manual

Type
User manual
This manual is also suitable for

Kichler Lighting 43872OZ is a customizable light fixture designed for easy installation and adjustment. With its adjustable arms and stems, you can create the perfect lighting arrangement for your space. The fixture comes with a variety of stem lengths, allowing you to customize the height of the fixture to suit your needs. The fixture also includes a loop for hanging a chain or cord, giving you even more flexibility in your installation options. The fixture is easy to wire and connect, and the included instructions provide clear and concise guidance on the installation process.

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages