Vulcan Hart K6DTT Datasheet

K6DTT
Vulcan Hart
Brand
Vulcan Hart
Model
K6DTT
Type
Datasheet

Vulcan Hart K6DTT is a 2/3 jacketed counter tilting steam kettle with a capacity of 6 gallons/24 quarts/23 liters. It boasts a durable stainless steel construction, including a type 316 and type 304 stainless steel exterior, and is designed to operate at a maximum of 50 psi. The kettle features a removable tilt handle with an insulated knob for safe and easy pouring, and the steam supply is controlled with a valve mounted in the right leg with a condensate drain through the left leg. The K6DTT meets ASME code and is UL Classified for sanitation in accordance with ANSI/NSF Standard #4.

Vulcan Hart K6DTT is a 2/3 jacketed counter tilting steam kettle with a capacity of 6 gallons/24 quarts/23 liters. It boasts a durable stainless steel construction, including a type 316 and type 304 stainless steel exterior, and is designed to operate at a maximum of 50 psi. The kettle features a removable tilt handle with an insulated knob for safe and easy pouring, and the steam supply is controlled with a valve mounted in the right leg with a condensate drain through the left leg. The K6DTT meets ASME code and is UL Classified for sanitation in accordance with ANSI/NSF Standard #4.

STEAM
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
F-37451 (04/10)
Item # C.S.I. Section 11420
K6DTT
DIRECT STEAM COUNTER
2
⁄
3
JACKETED TILTING KETTLE
Model K6DTT
K6DTT 6 gallons/24 quarts/23 liters capacity
STANDARD FEATURES
Direct steam, all welded stainless steel, ■
2
⁄
3
jacketed
counter tilting steam kettle.
Ellipsoidal bottom kettle liner formed and fully welded type ■
316 and type 304 stainless steel exterior with
1
⁄
4
x
5
⁄
8
inch
bar rim with buttery shaped pouring lip and embossed
gallon/liter markings, designed to operate at a maximum
of 50 psi (3.4 kg/cm
2
).
Embossed gallon/liter markings. ■
Removable tilt handle with insulated knob. ■
Steam supply controlled with valve mounted in right leg ■
and condensated drain through the left leg.
One year limited parts and labor warranty. ■
OPTIONS
Correction facility package.
a. Security type tamper resistant fasteners with tack
welds.
Second year extended limited parts and labor warranty.
ACCESSORIES (Packaged & Sold Separately)
One piece lift-off stainless steel cover.
Tilting kettle strainer.
Kettle tables.
Kettle stand (see spec F-32474 or F-32603) with
ADAPTER-DIRECT.
Steam control assembly (line strainer, steam trap, safety
valve).
Single perforated stainless steel basket assembly.
SPECIFICATIONS
Direct steam, all welded stainless steel,
2
⁄
3
jacketed counter
tilting steam kettle. Vulcan-Hart Model No. K6DTT. Ellipsoidal
bottom kettle liner formed and fully welded type 316 and
type 304 stainless steel exterior with
1
⁄
4
x
5
⁄
8
inch bar rim
with buttery shaped pouring lip and embossed gallon/
liter markings, designed to operate at a maximum of 50 psi
(3.4 kg/cm
2
). Removable tilt handle with insulated knob.
Steam supply controlled with valve mounted in right leg and
condensated drain through the left leg.
Exterior Dimensions:
21
3
⁄
4
"w x 15
1
⁄
2
"d x 30
1
⁄
2
"h.
UL Classied for sanitation in accordance with ANSI/NSF
Standard #4. Meets ASME code.
P.O. Box 696
■
Louisville, KY 40201
■
Toll-free: 1-800-814-2028
■
Local: 502-778-2791
■
Quote & Order Fax: 1-800-444-0602
a division of ITW Food Equipment Group LLC
STEAM
F-37451 (04/10)
K6DTT
DIRECT STEAM COUNTER
2
⁄
3
JACKETED TILTING KETTLE
SERVICE CONNECTIONS
NOTE: In line with its policy to continually improve its products, Vulcan reserves the right to change materials and specications without notice.
Steam supply:
1
⁄
2
" IPS.
Condensate return:
1
⁄
2
" IPS.
NOTE
• Installationofbackowpreventers,vacuumbreakersandother
specic code requirements is the responsibility of the owner and
installer. It is the responsibility of the owner and installer to comply
with local codes.
• Thisapplianceismanufacturedforcommercialinstallationonly
and is not intended for home use.
DIRECT STEAM DATA
Steam supply to the kettles must:
1. Maintain a steady 10 psi ow under operating conditions.
2. Have a minimum ow (see chart) of dry steam.
3. Be adequately trapped to provide dry steam. (See ball oat trap.)
STEAM FLOW RATE AT 10 PSIG AT THE KETTLE
Time to boil
Fast Boil
12 minutes
Medium Boil
20 minutes
Stock Boil
30 minutes
lbs/hr kg/hr lbs/hr kg/hr lbs/hr kg/hr
6 gallons 32 18 21 10 14 6
15.1
(382)
11.8
(300)
19.6
(497)
14.4
(365)
27.7
(704)
8.5
(216)
11.4
(289)
14.1
(358)
4.4
(112)
8.4
(214)
10.0
(253)
27.6
(700)
26.2
(665)
11.2
(284)
15.0
(381)
7.5
(191)
2.6
(66)
MODEL TRUE WORKING CAPACITY 4 OZ. SERVINGS
K6DTT
6 gallons, 24 quarts
23 liters
192
  • Page 1 1
  • Page 2 2

Vulcan Hart K6DTT Datasheet

K6DTT
Vulcan Hart
Brand
Vulcan Hart
Model
K6DTT
Type
Datasheet

Vulcan Hart K6DTT is a 2/3 jacketed counter tilting steam kettle with a capacity of 6 gallons/24 quarts/23 liters. It boasts a durable stainless steel construction, including a type 316 and type 304 stainless steel exterior, and is designed to operate at a maximum of 50 psi. The kettle features a removable tilt handle with an insulated knob for safe and easy pouring, and the steam supply is controlled with a valve mounted in the right leg with a condensate drain through the left leg. The K6DTT meets ASME code and is UL Classified for sanitation in accordance with ANSI/NSF Standard #4.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents