Dometic MARINE MODELS 506+, 1006: RV MODELS 509+, 1009 VACUFLUSH TOILET (DRILLING AND MOUNTING TEMPLATE) Installation guide

Model: MARINE MODELS 506+, 1006: RV MODELS 509+, 1009 VACUFLUSH TOILET (DRILLING AND MOUNTING TEMPLATE)

Center for 4-1/2” [114mm] diameter hole

Funnel ange mounting hole centers

(8 required, 3/16” [4.8mm] diameter)

INSTRUCTIONS

1. Set toilet in desired mounting position. Check clearance for seat and lid in “up”

position, ush lever location, and water valve connection.

2. Mark the oor through the four toilet base mounting holes. Set toilet aside.

3. Punch out four black dots on template, and align mounting template with

marks made on oor through the four toilet base mounting holes.

4. Mark the eight oor ange holes and the 4-1/2” diameter hole with a center

punch.

5. Drill eight oor ange holes, cut out 4-1/2” diameter hole, and install toilet.

MARINE MODELS 506+, 1006: RV MODELS 509+, 1009

VACUFLUSH TOILET DRILLING AND MOUNTING TEMPLATE

REVISION A

Form No. 600342326 11/17

Dometic Corporation, Sanitation Division

13128 State Rt. 226, P.O. Box 38

Big Prairie, OH 44611 USA

1-800-321-9886 • Fax: 330-496-3097

www.Dometic.com

Model: MARINE MODELS 506+, 1006: RV MODELS 509+, 1009 VACUFLUSH TOILET (DRILLING AND MOUNTING TEMPLATE)