Shimano SM-BB93 Dealer's Manual

Brand: Shimano

Model: SM-BB93

Type: Dealer's Manual

(English)

DM-MDFC001-03

Dealer's Manual

ROAD MTB Trekking

City Touring/

Comfort Bike

URBAN SPORT E-BIKE

Front chainwheel

ALIVIO Bottom bracket

FC-M4000

FC-M4050

FC-M4050-B2

FC-M4060

ACERA

FC-M3000

FC-M3000-B2

FC-M3000-8

ALTUS

FC-M2000

Non-Series

FC-MT100

FC-MT101

FC-MT101-B2

FC-MT200

FC-MT210

FC-MT210-B2

FC-MT300

FC-M315

FC-M315-B2

FC-TY501

SM-BB52

BB-UN100

BB-UN101

BB-UN300

BB-UN26

BB-ES300

BB-MT500-PA

BB-MT500

CONTENTS

IMPORTANT NOTICE ..............................................................................................3

TO ENSURE SAFETY ............................................................................................... 4

LIST OF TOOLS TO BE USED .................................................................................. 8

INSTALLATION .....................................................................................................10

List of tool combinations ...........................................................................................................................10

2 piece crankset .......................................................................................................................................... 11

OCTALINK type ...........................................................................................................................................16

SQUARE type ..............................................................................................................................................17

PRESS-FIT BB ........................................................................................................ 20

Adapter ....................................................................................................................................................... 20

Assembly example ...................................................................................................................................... 20

Installation .................................................................................................................................................. 21

Removal ......................................................................................................................................................22

MAINTENANCE .................................................................................................... 24

Replacing chainrings ..................................................................................................................................24

Installation of the chain guard ..................................................................................................................26

IMPORTANT NOTICE

•

This dealer’s manual is intended primarily for use by professional bicycle mechanics.

Users who are not professionally trained for bicycle assembly should not attempt to install the components themselves using the dealer’s manuals.

If any part of the information on the manual is unclear to you, do not proceed with the installation. Instead, contact your place of purchase or a local

bicycle dealer for their assistance.

•

Make sure to read all instruction manuals included with the product.

•

Do not disassemble or modify the product other than as stated in the information contained in this dealer’s manual.

•

All manuals and technical documents are accessible online at https://si.shimano.com.

•

For consumers who do not have easy access to the internet, please contact a SHIMANO distributor or any of the SHIMANO ofﬁces to obtain a hardcopy

of the User's Manual.

•

Please observe the appropriate rules and regulations of the country, state or region in which you conduct your business as a dealer.

For safety, be sure to read this dealer’s manual thoroughly before use, and follow it for correct use.

The following instructions must be observed at all times in order to prevent personal injury and physical damage to equipment and surroundings.

The instructions are classiﬁed according to the degree of danger or damage which may occur if the product is used incorrectly.

DANGER

Failure to follow the instructions will result in death or serious injury.

WARNING

Failure to follow the instructions could result in death or serious injury.

CAUTION

Failure to follow the instructions could cause personal injury or physical damage to equipment and surroundings.

TO ENSURE SAFETY

WARNING

•

Be sure to follow the instructions provided in the manuals when installing the product.

Only use SHIMANO genuine parts. If a component or replacement part is incorrectly assembled or adjusted, it can lead to component failure and cause

the rider to lose control and crash.

•

Wear approved eye protection while performing maintenance tasks such as replacing components.

Be sure to also inform users of the following:

•

Clean the chain with an appropriate chain cleaner regularly.

Intervals between maintenance depend on the use and riding circumstances. Never use alkali based or acid based solvents, such as rust cleaners. If

these solvents are used the chain might break and cause serious injury.

•

Check that there are no cracks in the crank arms before riding the bicycle. If there are any cracks, the crank arm may break and you may fall off the

bicycle.

•

Check the chain for any damage (deformation or cracking), skipping, or other abnormalities such as unintended gear shifting. If any problems are

found, consult a dealer or an agency. The chain may break, and you may fall.

•

Be careful not to let the hemming of your clothes get caught in the chain while riding. Otherwise you may fall off the bicycle.

For Installation to the Bicycle, and Maintenance:



2 piece crank type

•

Make sure to correctly install the inner cover. If the inner cover is not installed correctly, the axle may rust and become damaged, and the bicycle may

fall over and serious injury may occur as a result.

•

Be sure to use a torque wrench with the speciﬁed torque value when tightening the crank mounting bolts. After riding approximately 100 km (60

miles), use a torque wrench to re-check the tightening force.

If the crank is used when the tightening torque is weak, the crank could detach and you may fall off the bicycle.

CAUTION

Be sure to also inform users of the following:

•

Be careful to keep body parts away from the sharp teeth of chainrings.

TO ENSURE SAFETY

NOTICE

Be sure to also inform users of the following:

•

Before riding the bicycle, check that there is no play or looseness between connecting parts. Also, be sure to retighten the crank and pedals at periodic

intervals.

•

Be sure to keep turning the crank arm during the lever operation.



MTB

•

When the chain is in any of the positions shown in the illustration, the chain may come into contact with the front chainring or front derailleur and

generate noise. If noise is a problem, shift the chain onto the next largest rear sprocket or the one after if the chain is in the position shown in Figure

1. Shift the chain onto the next smallest sprocket or the one after if it is in the position shown in Figure 2.

Figure 1

Figure 2

Double Triple

Front chainring

Rear sprocket

•

Use a neutral detergent to clean the crank arm and the bottom bracket. Using alkaline or acidic detergents may cause discoloration.

•

If pedaling performance does not feel normal, contact your place of purchase.

•

Do not wash the bottom bracket with high-pressure jets of water. Water may enter the bearing section and cause noise or adhesion.

•

The gears should be periodically washed with a neutral detergent. In addition, cleaning the chain with neutral detergent and lubricating it can be an

effective way of extending the life of the gears and the chain.

•

The cuffs of your clothing may get dirty from the chain while riding.

•

Products are not guaranteed against natural wear and deterioration from normal use and aging.

•

For maximum performance we highly recommend SHIMANO lubricants and maintenance products.

TO ENSURE SAFETY

For Installation to the Bicycle, and Maintenance:

•

When installing the pedals, apply a small amount of grease to the threads to prevent the pedals from sticking. Use a torque wrench to securely tighten

the pedals. Tightening torque: 35 - 55 N·m. The right-hand crank arm has a right-hand thread, and the left-hand crank arm has a left-hand thread.

•

If the bottom bracket shell is not parallel, gear shifting performance will drop.

•

If the chain keeps coming off the gears during use, replace the gears and the chain.



2 piece crank

•

When installing the left and right adapters, apply grease and be sure to install the inner cover. Otherwise the waterprooﬁng performance will worsen.

•

To ensure the best performance, be sure to use only the speciﬁed type of chain.

•

If a squeaking noise is heard coming from the bottom bracket axle and the left crank arm connector, apply grease to the connector and then tighten it

to the speciﬁed torque.

•

If you feel any looseness in the bearings, the bottom bracket should be replaced.

•

Be sure to use the speciﬁed gear tooth combination. If an unspeciﬁed gear is used, the dimension between the gears changes, and the chain may fall

in between the gears.



OCTALINK type/SQUARE type

•

Be sure to use only the applicable chain and bottom bracket.

•

Apply grease to the bottom bracket before installing it.

•

If you feel any looseness in the bottom bracket axle, the bottom bracket should be replaced.

The actual product may differ from the illustration because this manual is intended mainly to explain the procedures for using

the product.

LIST OF TOOLS TO BE USED

The following tools are needed for installation, adjustment, and maintenance purposes.

Tool Tool Tool

4 mm hexagon wrench Soft face mallet TL-FC32

5 mm hexagon wrench TL-FC10 TL-FC33

8 mm hexagon wrench TL-FC11 TL-FC36

Screwdriver [#2] TL-FC16 TL-BB12

15 mm spanner TL-FC18 TL-BB13

16 mm spanner TL-FC21 TL-UN66

17 mm spanner TL-FC31 TL-UN74-S

INSTALLATION

List of tool combinations

INSTALLATION



List of tool combinations

Use the tools in the correct combination.

BB-MT500/SM-BB52

TL-FC32 TL-FC33

TL-FC36

INSTALLATION

2 piece crankset



2 piece crankset

Spacer installation method

(z)

Check whether the width of the bottom

bracket shell is 68 mm, 73 mm, or 83 mm.

(z)

Bottom bracket shell width

Install the adapter.

See the illustrations for band type, bracket type, and chain case stay type.

Band type

68 mm 73 mm

(A) (A)

(A)

2.5 mm spacer

TECH TIPS

If using three 2.5 mm spacers with a band

type and a bottom bracket shell having a

width of 68 mm, install the three spacers so

that there are two on the right and one on

the left.

68 mm

0.7 mm spacer

1.8 mm spacer*

2.5 mm spacer

1.8 mm corresponds to the thickness

of the chain case.

INSTALLATION

2 piece crankset

Bracket type

68 mm 73 mm

(B)

(A)(B) (A)

(A)

BB mount-type bracket

(B)

2.5 mm spacer

To be continued on next page

INSTALLATION

2 piece crankset

Installation of the crank

(A)

(D)

(E)

(B) (C)

Grease the left and right hand adapters

and use the SHIMANO original tool to

install the right hand adapter of the

bottom bracket, the inner cover and the

left hand adapter of the bottom bracket.

(A)

TL-FC32

(B)

Inner cover

(C)

Right hand adapter

(counterclockwise thread)

(for 70 mm [M36], turn clockwise

(clockwise thread))

(D)

Left hand adapter

(clockwise thread)

(E)

Apply grease:

Premium Grease

(Y-04110000)

Tightening torque

35 - 50 N·m

Insert the right crank arm unit.

To be continued on next page

INSTALLATION

2 piece crankset

(C)

(B)

(A)

Set the wide groove area of the left

crank arm into the axle of the right

crank arm unit where the groove is wide.

(A)

Wide groove area

(left crank arm)

(B)

Wide groove area (axle)

(C)

Apply grease:

Premium Grease

(Y-04110000)

(A)

(B)

(C)

Use the SHIMANO original tool to

tighten the cap.

(A)

TL-FC16

(B)

Cap

(C)

Apply grease:

Premium Grease

(Y-04110000)

Tightening torque

0.7 - 1.5 N·m

INSTALLATION

2 piece crankset

(A)

(B)

(z)

(C)

Push in the stopper plate and check that

the plate pin is securely in place, and

then tighten the bolt of the left crank

arm.

(z)

The illustration is of the left crank

arm (cross-section)

(A)

Plate pin

(B)

Stopper plate

(C)

Left crank arm

Tightening torque

12 - 14 N·m

NOTICE

•

For MTB/Trekking

Spacers used vary according to the width of

the bottom bracket shell. For details, refer

to “Spacer installation method”.

•

Set the stopper plate in the correct

direction as shown in illustration.

INSTALLATION

OCTALINK type



OCTALINK type

Installation of the bottom bracket

(A) (B) (C)

Apply grease to the main body, and

install using the SHIMANO original tool.

First install the main body, then the

adapter.

(A)

Adapter

(B)

Body

(C)

Apply grease:

Premium Grease

(Y-04110000)

Tightening torque

50 - 70 N·m

NOTICE

If the adapter is made of aluminum or steel

Apply grease to the adapter.

If the adapter is made of plastic

Do not apply grease to the adapter.

Installation of the front chainwheel

(A)

Use a hexagon wrench to install the

front chainwheel.

(A)

8 mm hexagon wrench

Tightening torque

35 - 50 N·m

INSTALLATION

SQUARE type



SQUARE type

Installation of the bottom bracket

(A) (B)

(C)

Install using the SHIMANO original tool.

First install the main body, then the

adapter.

(A)

Adapter

(B)

Body

(C)

Front chainwheel

Tightening torque

50 - 70 N·m

NOTICE

If the main body and adapter are made of

aluminum or steel

Apply grease to the main body and adapter.

Apply grease:

Premium Grease (Y-04110000)

If the main body and adapter are made of

plastic

Do not apply grease to the main body or

adapter.

INSTALLATION

SQUARE type

Installation of the front chainwheel

When using a hexagon wrench

(A)

Use a hexagon wrench to install the

front chainwheel.

(A)

8 mm hexagon wrench

Tightening torque

35 - 50 N·m

When using SHIMANO original tools

(A)

(B)

Use the SHIMANO original tool to install

the front chainwheel.

(A)

TL-FC10/TL-FC11

(B)

15 mm spanner/16 mm spanner

Tightening torque

35 - 50 N·m

TECH TIPS

•

When using TL-FC10, use a 16 mm spanner.

•

When using TL-FC11, use a 15 mm spanner.

PRESS-FIT BB

Adapter

PRESS-FIT BB



Adapter

(A) (C)(B)

(D)

(z)

Bottom bracket shell width

(A)

Left-hand adapter

(B)

Inner cover

(C)

Right hand adapter

(D)

2.5 mm spacer

NOTICE

Some models do not need spacers.



Assembly example

Bottom bracket shell with 92 mm

width

•

The 2.5 mm spacer is not needed for a bottom bracket shell

width of 92 mm.

•

Use the inner cover.

(A)

2.5 mm spacer

NOTICE

•

If the frame has openings inside the

bottom bracket shell, it should be installed

with the inner cover sleeve to prevent

possible contamination.

•

If the frame has no openings inside the

bottom bracket shell, it can be installed

without the inner cover sleeve.

Bottom bracket shell with

89.5 mm width

•

For a bottom bracket shell width of 89.5 mm, insert the

2.5 mm spacer into the right hand side (between the frame

and the right hand adapter).

•

Use the inner cover.

(A)

Page is loading ...

Shimano SM-BB93 Dealer's Manual

Shimano SM-BB93 Dealer's Manual

Shimano SM-BB93 Dealer's Manual

Related papers

Other documents