Panamax BEZ7500-PRO-S User manual

INS0789RevA08/06

M7500PROBezelRemovalandReplacementInstructions

BezelRemoval

BezelReplacement

•Iftheunitisnotalreadyunplugged,DO SO NOW!

TheM7500PROhasa5piecebezelset;amainaluminumbezel,twoaluminumtrimpieces(upperand

lower)andtwoplasticendcaps.

1.UseasmallPhillips

screwdrivertoremovethe

fourscrewslocatedonthe

trimpieces.

2.CAREFULLYremovethe

trimpiecesbypullingthem

straightforward.

3.Usethe3mmhexwrench

(included)toremovethefour

flatheadAllenscrews

locatedinthecornersofthe

mainbezel.

4.Usingbothhands,

carefullyremovethemain

bezelbypullingitstraight

forward.

5.Removetheplastic

endcapsbypulling

themoutofthe

mainbezel.

Toreplacetheoriginalbezel,simplyfollowtheinstructionsaboveinreverse:

1.Placetheplasticendcapsintothemainbezel.

2.CarefullyplacethemainbezelontothefrontoftheunitmakingsurenottopushtheLED’sintotheunit.

3.InsertandtightenthefourflatheadAllenscrewsusingthe3mmhexwrench(included).

4.CAREFULLYslidethetrimpiecesintothemainbezelmakingsurenottobendthetrimpieces.

5.InsertandtightenthefourscrewsusingasmallPhillipsscrewdriver.