POLYWOOD J147WH Operating instructions

J147WH
POLYWOOD
Brand
POLYWOOD
Model
J147WH
Type
Operating instructions

This manual is also suitable for

Qty. Description
TOOLS NEEDED
HARDWAREISCOATEDSTAINLESSSTEELUNLESSOTHERWISESPECIFIED
Step 1
Attach rocker bottoms to sideframes
using (4) .27x3 wafer screws.
__(1) Hardware pack
__(2) Sideframes
__(2) Rocker bottoms
__(1) Back insert
__(1) Seat insert
__(1) Seat frame
__(2) Long braces
__(1) Short brace
__(1) Head piece
Model: J147
Step 2
Attach long braces, short brace, seat frame and back frame
to one of the sideframes using (7) .27x3 wafer screws.
Note: front of seat is wider
Step 3
Insert head piece into top of post
Repeat step 2 on other side
11/21/2012
ASSEMBLY INSTRUCTIONS
2
Finial w/dowel screw
NOTE:
Partialy thread both screws
into post before tightening.
Rocker bottoms may require some
flexing for proper fit.
Step 4
Attach finials to top of post
4mm Hex key for drill:
INCLUDED
4mm Hex Key, Allen, T-handle
(INCLUDED)
18
.27 X 3 SOCKET WAFER A
  • Page 1 1

POLYWOOD J147WH Operating instructions

J147WH
POLYWOOD
Brand
POLYWOOD
Model
J147WH
Type
Operating instructions
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents