Noble House 238516 Operating instructions

Brand: Noble House

Model: 238516

Type: Operating instructions

This manual is also suitable for

1207

The Noble House 238516 Loveseat is a stylish and comfortable addition to any living room. With its sturdy frame, soft cushions, and easy assembly, it's the perfect place to relax and unwind. The loveseat features a chaise lounge on one side, providing extra seating or a cozy spot to put your feet up. Assembly is a breeze with the included hardware and step-by-step instructions.

The Noble House 238516 Loveseat is a stylish and comfortable addition to any living room. With its sturdy frame, soft cushions, and easy assembly, it's the perfect place to relax and unwind. The loveseat features a chaise lounge on one side, providing extra seating or a cozy spot to put your feet up. Assembly is a breeze with the included hardware and step-by-step instructions.

Loveseat

Caution : You must read this before you proceed.

1 OF 6

Part NO. Picture Description

A

Chair Backrest with

Legs

B Chair Seat

C Front Leg

Label Picture Description

a Bolt M8X60mm

b Bolt M8X50mm

d Flat Washer Ring

e Spring Washer Ring

f Allen Key

Qty

1 PC

Qty

11PCS

1 PC

2 PCS

3 PCS

13 PCS

13 PCS

1 PC

2 OF 6

Hardware

Pack

M8X50mm bolts - 3pcs

M8X60mm bolts - 11pcs

Flat Washer Ring -13pcs

Spring Washer Ring -

13pcs

Allen Key - 1pc

Unpack and

place all parts

for clear

visibility.

Before Beginning Assembly:

3 OF 6

Chair Seat

Step 2

Put the Chair Backrest with Legs ( A) onto a flat table or panel.

Align the MOUNTING POSITIONs on Chair Backrest with Legs (A) with the

MOUNTING POSITIONs on chair seat frame.

Use your left hand to push the seat frame floorwards, depicted by Arrow 1.

This action helps to ensure the Chair Seat(B) is pressed towards to the Chair

Backrest with Legs (A) with no gap between these.

Then, lock the middle MOUNTING POSITIONs and the corner MOUNTING

POSITIONs with 6 Bolts(a)+ 6 Flat Washer Ring(d) + 6 Spring Washer Ring(e)

with the Allen Key(f).

And then lock the side MOUNTING POSITIONs with 2 Bolts(b) +2 Flat

Washer Ring(d) + 2 Spring Washer Ring(e) with the Allen Key(f).

CAUTION: When tightening these bolts, tighten sequentially.

DO NOT tighten any screw fully and then towards the next one.

This would cause the frame to warp.

Place the Chair Back(A) on a soft surface to avoid any scratches on the

products.

REMOVE the non-woven fabric from the underside of the Chair Seat(B).

Take out the 2 wooden legs and the package of hardware accessories .

Step 1

Chair Backrest with Legs

4 OF 6

Step 4

Insert each front leg completely vertically into each seat frame corner.

PRESS FIRMLY DOWN with your hand until there is no gap.

Now tighten the bottom bolt first, then the bolt on the top by using 4 Bolts(b)+

4 Flat Washer Rings(d)+ 4 Spring Washer Rings(e) with Allen Key(f).

Make sure all parts are connected and locked into position.

Finally, seal the Seat Base Cover back on to the underside of the chair seat .

Turn it the right side up.The chair is ready for use.

5 OF 6

6 OF 6

1
2
3
4
5
6

Noble House 238516 Operating instructions

Brand: Noble House

Model: 238516

Type: Operating instructions

This manual is also suitable for

1207

The Noble House 238516 Loveseat is a stylish and comfortable addition to any living room. With its sturdy frame, soft cushions, and easy assembly, it's the perfect place to relax and unwind. The loveseat features a chaise lounge on one side, providing extra seating or a cozy spot to put your feet up. Assembly is a breeze with the included hardware and step-by-step instructions.

Download PDF

Related papers

Other documents