Toro Spark Arrester Kit, Log Splitter Installation guide

Brand: Toro

Model: Spark Arrester Kit, Log Splitter

Type: Installation guide

FormNo.3414-686RevA

SparkArresterKit

LogSplitter

ModelNo.137-0592

InstallationInstructions

WARNING

CALIFORNIA

Proposition65Warning

ThisproductcontainsachemicalorchemicalsknowntotheStateofCalifornia

tocausecancer,birthdefects,orreproductiveharm.

Installation

LooseParts

Usethechartbelowtoverifythatallpartshavebeenshipped.

ProcedureDescription

Qty.

Use

Nopartsrequired

–

Removethemuferguards.

Screw(5mm)

Sparkarrester

Installthesparkarrester.

RemovingtheMufer

Guards

NoPartsRequired

Procedure

Note:Retainallhardwareunlessindicatedotherwise.

1.Parkthemachineonalevelsurfaceandshut

offtheengine.

2.Allowthemachinetocoolcompletely.

3.Removethe4bolts(M6)andmuferguardfrom

theengine(Figure1).

g208610

Figure1

1.Bolt—M6(4)2.Muferguard

8111LyndaleAvenueSouth

Bloomington,MN55420

Registeratwww.T oro.com.

OriginalInstructions(EN)

PrintedintheUSA

AllRightsReserved

*3414-686*A

4.Removethe2nuts(8mm),gasket,andmufer

fromthecylinder(Figure2).

g208611

Figure2

1.Muferprotector5.Gasket

2.Screw(6mm)6.Cylinderbolt(2)

3.Mufer7.Screw—5mm(4)

4.Nut—8mm(2)

5.Remove1screw(6mm)and4screws(5mm)

fromthemuferprotector,andremovethe

muferprotector(Figure2).

InstallingtheSparkArrester

Partsneededforthisprocedure:

Screw(5mm)

Sparkarrester

Procedure

1.Removeanddiscardthe2screws(5mm)and

bafefromthemufer(Figure3).

g208909

Figure3

1.Screw—5mm(2)2.Bafe

2.Installthesparkarrestertothemuferusing2

screws(5mm)fromthekit(Figure2).

g208908

Figure4

1.Screw—5mm(2)2.Sparkarrester

3.Installthemuferprotectortothemuferusing

1screw(6mm)and4screws(5mm)asshown

inFigure2.

4.Installthemuferandgasketontothecylinder

boltsusing2nuts(8mm)asshowninFigure2.

5.Installthemuferguardusingthe4boltsin

Figure1thatyouremovedpreviously.

Maintenance

RecommendedMaintenanceSchedule(s)

MaintenanceService

Interval

MaintenanceProcedure

Every100hours

•Cleanthesparkarrester.

EngineMaintenance

CleaningtheSparkArrester

ServiceInterval:Every100hours/Every6months

(whichevercomesrst)

1.Removethemuferfromthemachine;referto1

RemovingtheMuferGuards(page1).

2.Removethesparkarrester(Figure4).

3.Useabrushtocarefullyremovecarbondeposits

fromthespark-arresterscreen(Figure5).

Note:Replacethesparkarresterifithas

breaksorholes.

g208746

Figure5

1.Sparkarrester

2.Brush

4.Installthesparkarrester(Figure4)

Toro Spark Arrester Kit, Log Splitter Installation guide

Toro Spark Arrester Kit, Log Splitter Installation guide

Toro Spark Arrester Kit, Log Splitter Installation guide

Related papers

Other documents