ASL-03

August Home ASL-03, ASL-03, AC-R1 User manual

  • Hello! I am an AI chatbot trained to assist you with the August Home ASL-03 User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
  • What Wi-Fi requirements are needed to set up August Connect?
    What power requirements are needed to set up August Connect?
    How do I start the setup process for August Connect on iOS?
    How do I start the setup process for August Connect on Android?
    What should I do if I don't see a flashing green light on my August Connect?
    What happens after August Connect joins my home Wi-Fi network?
    What should I do if my signal levels are low?
Setting Up August Connect (iOS and Android)
Setting Up August Connect (iOS)
Requirements
Make sure your iOS device has Wi-Fi turned on (Apple Settings > Wi-Fi)
Make sure your phone is connected to your home Wi-Fi network
(Connect is compatible with 2.4 gHZ Wi-Fi)
The August Connect requires an active August Smart Lock and needs
to be installed using a compatible phone. Please visit our phone
compatibility page to ensure that your phone is compatible.
To install your August Connect:
Plug In. Plug your August Connect into a power outlet within 15 feet of
your August Smart Lock for optimal performance and reliability.
Wait for the flashing green light on your August Connect. If you don’t
see the flashing green light press and hold the button on your August
Connect for 3 seconds.
In the side menu, tap Set Up New Device
Choose Set Up An August Connect
If applicable, choose a lock to associate your Connect with.
When prompted, plug connect into an outlet near your door. Follow the in-app
instructions.
Apple’s accessory setup interface will ask you to choose your home Wi-Fi
network.
Once your Connect has successfully joined your home Wi-Fi network, the
August Home app will check the signal levels of your Wi-Fi and bluetooth
connections.
If your signal levels are good, you’re just about finished.
If your signal levels are low, you will be guided through adjusting the location
of your Connect to improve its connection.
Your Connect is now set up and ready to use!
Setting Up August Connect (Android)
To install your August Connect:
Plug your August Connect into a power outlet within 15 feet of your
August Smart Lock for optimal performance and reliability.
Wait for the flashing green light on your August Connect. If you don’t
see the flashing green light press and hold the button on your August
Connect for 3 seconds.
The August Connect requires an active August Smart Lock and needs to be
installed using a compatible phone. Please visit our phone compatibility page
to ensure that your phone is compatible.
   Tap the Menu Icon
   Select Settings
Select Your Lock in Lock Settings
Select Set Up August Connect
   Select Begin Scan to Start the Connection Process
   Enter Your Wi-Fi Password
The Connect is connecting to Your Wi-Fi Network
   Select Done
/