Dayleer Wireless Car Charger Holder, 3 in 1 Qi Intelligent Charging, Auto-clamping, Car Mount for Windshield/Dashboard/Air Vent. Compatible User manual

  • Hello! I am an AI chatbot trained to assist you with the Dayleer Wireless Car Charger Holder, 3 in 1 Qi Intelligent Charging, Auto-clamping, Car Mount for Windshield/Dashboard/Air Vent. Compatible User manual. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Wireless Car Charger Mount
User Manual
Specification
MaterialABS+Silica gel
ColorBlack
Input power5V/2A or 9V/1.67A
Output power10W/7.5W/5W
Wireless charging effective distance3-6mmMAX
Conversion efficiency Normal charge 70%Fast Charge 75%
Working frequency 110-205kHz
Packing Included
1*Wireless Car Charger Mount
1*Suction cup stand
1*Air Vent Clip
1*USB cable
1*User Manual
Instruction
Operation Steps
1. Adjust the screw cap to the best active status
2. Input : connect the wireless charger and car adapter with the charging
cord
3. Press the button of clip to fix then adjust the angle and tighten the
fixed nut.
4. Place cellphone, the charger can sense your phone when approach,
the clips will automatically grip your phone and wireless charge.
5. Release the cellphone
6. LED indicated light shows the working status:
6.1) Blue light is on when charging
6.2) Red light flashes when sensing foreign bodies
Features
1. Wireless charging for devices with QI standard.
2. Charging fast at 10W, 7.5W and ordinary at 5W, compatible with Apple and Android devices.
3. Wireless charging sensing: The two clips will automatically clamping the phone and charge
wireless when the phone with wireless charge receiver approaches the charger.
4. Foreign body detection sensing: The two clips will also automatically clip the phone, then
use it for a phone holder when the phone with none of the receive approaches the charger.
5. The clips can extend and retract flexible, so easily fix the phone to charge or release to use.
6. New upgrade mute design: Using the mute motor, the clips stretch and shrink with no noise.
7. 360
°
Rotation: The handle support 360
°
rotation
which enables you to find suitable
directions to place your phone on or get your phone off.
8. Over-current protection, over-heat protection and short-circuit protection.
9. Certification: FCC, CE, ROHS.
Warranty
This device is free from defects in material and workmanship under normal use for twelve (12)
months commencing upon the date of purchase. Proof of purchase is required for warranty
service. The consumer should never attempt to open or disassemble the device, and doing so
may cause damage that voids your warranty. Any problem during in use please do not hesitate to
contact us >> Liangyuamz@163.com
All Right Reserved - Dayleer
/