2. Way Basics
  3. WB-WINE-6-WE

Way Basics WB-WINE-6-WE Installation guide

  • Hello! I am an AI chatbot trained to assist you with the Way Basics WB-WINE-6-WE Installation guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
Help and Comments www.waybasics.com/contact
version 0418
CAUTION placing unit on its side or back
will compromise structural integrity. Use
right side up.
Important
THIS SIDE UP
5
2
1
3
6
Align back zBoard to holes
in the horizontal zBoard.
Align vertical zBoards to holes
in the horizontal zBoard.
Place alignment pins
in vertical zBoards and
back zBoard.
4
Carefully remove the protective
layer leaving the 3M adhesive
on zBoard (adhesive shown
in yellow).
Align Top zBoard and press firmly
to secure unit together.
12 Pins
2 Vertical zBoards
adhesive on 2 sides
1 Back zBoard
1 Top zBoard 1 Bottom zBoard
1 Diagonal zBoard
WARNING: CHOKING HAZARD
Small parts NOT for children under 3 years
• When moving your Way Basics unit, lift from the bottom
• Indoor use only. Not in bathroom.
Included
WINE CUBE 6 BOTTLES
• Assemble your unit on a flat even surface
• Make sure zBoard surfaces are clean and dry
Position the Diagonal zBoard inside
the cube as shown.
Enjoy building possibilities!
/