Pyle PP555 Installation guide

Pyle
Brand
Pyle
Model
PP555
Type
Installation guide
Mini-Phono Pre-Amplifier
PP555
www.pyleaudio.com
Please read before installing
Installation Manual
The pyle PP555 mini phono preamp was manufactured to enable you to connect
your record players (L) & (R) RCA OUT to the AUX, CD, DVD, Mp3 LINE IN on most
Stereo amplifiers.
This Unit :
• Converts your phono signal to a line level signal
• State-of-the-art phono preamp to accommodate magnetic pickups
• Ultra low-noise audio operational amplifiers offer outstanding sound performance
• Dedicated RCA and 1/4' output connections
• DC 12-Volt adapter included
Installation:
1. You can power your PP555 by installing a 9V battery in the bottom battery
compartment or by plugging the 12-Volt DC Adaptor into the DC jack located
under the grounding post.
Note Please be sure to adjust Power selector switch accordingly depending on
which power source you are using.
2. When connecting your record player to the pre-amp please
be sure to connect the ground cable. Most all record players
have a double RCA (L) & (R) combined with a ground wire.
Failure to connect ground wire properly may result in humming
noise.
3. You can choose to connect your amplifier's LINE IN to either
the (L) & (R) RCA OUTPUT or the 1/4 " Stereo Jack.
We hope you enjoy your Pyle product!
If you have any questions please contact:
support@pyleaudio.com
  • Page 1 1
  • Page 2 2
  • Page 3 3

Pyle PP555 Installation guide

Pyle
Brand
Pyle
Model
PP555
Type
Installation guide
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents