Neu Master Electric Brad Nailer User manual

If you loosed this two

bolts, inside springs and

the bracket of slider will

pop up together.

There is two location pillars

inside the bracket for

installing the springs, we

must place the spring on the

location pillar as right photo.

After the two springs were

installed to location pillars ,

then hold the springs and

insert them into the slots

on the slider as right photo.

Insert the two springs to

the slot slowly and

completely. then locked

the slider as right photo.

Tighten the bolt with

wrength, the slider

assembly done.

This manual is also suitable for