Sylvania SRC2319 Owner's manual

Category
CRT TVs
Type
Owner's manual

This manual is also suitable for

SYLVANIA
CO
This Owner's Manual is made of
recycled paper. I
determined that this product meets
the ENERGY STAR :_ guidelines for
energy efficiency. ENERGY STAR :_ is
a U.S. registered mark.
INSTRUCCIONES EN ESPANOL INCLUIDAS. I
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
CAUTmON
CAUTION: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALW1ED SERVICE PERSON-
NEL.
The cautioI1 marking is located oI_the lear of tile cabinet.
THIS SYMBOL INDICATES THAT DAN-
GEROUS VOLTAGE CONSTITUTING A
RISK OF ELECTRIC SHOCK 1S PRESENT
WITHIN THIS UNIT.
THIS SYMBOL INDICATES THAT THERE
ARE IMPORTANT OPERATING AN[)
MAINTENANCE INSTRUCTIONS 1N THE
LITERATURE ACCOMPANYING THE
APPLIANCE.
IMPORTANT SAFEGUARDS
l.Read instructions-A_ the safety aBd operati_*ginstrBctioi_s
should be lead betore the appliance is operated.
2.Retain ]Instructions-The sa}ety aIld operati_g i_structions
should be letai_ed for future leferei_ce.
3.Heed Warnings-All wami_,gs o_ tile app!im_cem_di*_the
operatii_g instructio_*sshould be adhered to.
4.Follow ]instructions-All operating m_duse instructions
should be %llowed.
5.Clea_ing-Unph_g TV/VCR t]'om the wall outlet be%re
charting. Do *lotuse _kluid charters or aerosol clea_ers. Use
a damp cloth for cleafi_g.
EXCEPT]ION: A product that is meam for ulfiBterrupted
servbe m,d, that for some specific reasoN, such as the possb
bi_ityof the loss of ml authorizatio_*code Aira CATV corn
verreL is Ilot ime_*dedto be tmphlgged by the user fer cbm>
i_lgor any othel purpose, may exclude the leference to
tmpluggi_g the applkmce in tile charting description othel-
wise lequimd i_*item 5.
&Attachments-Do _lotuse attachments _ot recommended by
the TV/VCR mamliacmrer as they may cause hazards.
7.Water and Moistm°e-Do i_ot use this TV/VCR i_earwater-
fer exampb, i_eara bath tub, wash bowl, kitchen sil_k, or
[am*dryrob, in a wet basemem, o_i_eara swimmi_g pool,
m_dthe _ike.
8.Accessories-Do _ot p_ace tills TV/VCR on an m,stable carl
sire*d,tripod, brackeL or table. Tile TV/VCR may fall CABS-
iIlg seriokts illiBry 10 some(me, aBd serious damage to the
applbmce. Use only with a cart, staB& tripod, bmckeL or
table recommended by the mamlfactureL or sold with the
TV/VCR. Any mounting of the
PORTABLE CART WARNING
applbmce shoukl follow the maml-
facm_e_'s i_structio_s aim should
Bse amOUI*tingaccessoo recom-
me_*dedby the manufacturer. AI_
applial*ce andcalt cott'lbiilatioll
should be moved with cme.
Quick stops, excessive %ice, and
tmeven surtaces may cause tile
appliai_ce and cart combiilatioi_ to
overturm
AMEUBLES- Cet apparei_ i}edoit &re _,_o_,_,_ou_
L_S C'a_pOS_NTES
_PP_aEILF _EUBLE_ _OUL_JES
plac_ que sur tm meuble (avec Otlsa_ls
roulettes) recommandd par b fabricam.
Si VOBSl'installez sur m*meuble 5
roulettes_ ddplacez les deux e_*sembIes
avec p_&autiom Un ar_&tblusqBe, ]'u-
tilisatioN d'une force excessive et des suriaces h'ldguli&es
HsqBemde d&tabiliser I'ensemb]e et de le _elwerser.
9. Ventila_ion-S_ots and opelJ_igs i_lthe cabinet and the back
orbottom are provkled tbr vemilatioi_ ai_dto ensure reliabb
opemtioll ot the TV/VCR and to protect it from overheat-
ing, and these openings must _*otbe blocked or cove_ed.
The ope_li_igsshould Never be blocked by p_aci_igthe
TV/VCR (ill a bed, sofa, rug, or other similar surface. This
TV/VCR should neve_ be phtced *learo_over a radiator or
heat registel. This TV/VCR should ]Kitbe p_acedin a built-
in installation such as a bookcase or rack tmless prope_
vemilatio_, is provided oithe maNBfacmrer's instructiolls
have beell adhered to.
1ILPo_er Som°ces-TMsTV/V( R should be operated only
trom tile type ot power source i_dicated on the marking
label. If you are not sure o} the type of power supply to
your home, consult your appliance dealer or local power
compa W, For TV/VCRs ime_Medto operate from batte O
power, ol other sources, lefer to tile operatiilg illStrBctioIls.
11.Grounding or Polarization-Tiffs TV/VCR is equipped
with a pohtrized altemati_g-cur_ei_t Hne ldug(a plug having
one Nade wide_ thai*the other). This p]Bg >,'i_tit imo the
power outlet only (me way. This is a safety feature. It you
are unabb to i_*sertthe plug fully imo the oBtbt, t_3,']evers-
ilig the plug. B the phlg shoukl sti_ tail to fit, CoNtactyour
ebctrbim* to replace your obsolete outlet. Do BOtdefeat the
saIety purpose oI the pohtrized plug.
12.Po_er-Cord Pro/ee/ion-Powe>supp_) colds shoukl be
roBted so that they are not likely' to be waH<edoI_or
ldnchedby items placedupoI}or again*stthem, payillg par-
ticu]ar attentio_l to colds at plugs, ccmvenience _eceptacIes,
aBd the point where they exit from the appliance.
- 2 - EN
IK09
FIGURE A
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
GROUND
OLAMP_
LEADIN
WIRE
ELECTRIC
SERVICE
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810_20)
GROUNDING CONDUCTORS
(NEC SECTION 810 21)
NEC - NATIONAL ELECTRICAL CODE
$2898A
SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
]13.0utdoor Antemm grounding-]If anoutsideantennaoJ
cable system is connected to tile TV/VCR, be sure the
aTlte!lnao_cable system is grounded so as to provide SO*lie
protection against voltage surges m_dbuilt-up static
cha_ges. Article S10 of the Natiolml E_ectrical Code,
ANSUNFPA No. 7(L provides inlormation with respect to
propel"grounding ol the mast ai_dsupportil,g structure,
groundi_g ol tile lead-i_l wi_e to an antemm discharge unit_
size of grou_ding conductors, location ol antemla-discha_ge
trait, com/ection to grounding e_ectrodes, m_drequirements
R_rthe grom_dii_gelectrode. (Fig. A)
14.Lightnir_g-For added protection 1or this TV/VCR receiver
dulilrg a _ightlrilrgstorm, or whelr it is _eltunattended and
rmused for long peliods of time, unplug it lrom the wall
out_et mid discolmect the antelma or cable system. This win
prevem damage to the TV/VCR due to lightlri*rgand
power-lilre sulges.
18.Power Lines-An outside antenna system stiou_d not be
located iHthe vici_fityof overhead powe! _inesor other
electric light or powel circuits, o_where it cmr ILd_into
such power lilies ol circuits. When i!_staHi_lgan outside
antenna system, extreme care should be taken to keep from
touchi_lg such power _inesor circuits as comact with them
might be lata].
1&Overloading°Do _lotoverload wall outlets a_ldextensio_l
cords as this calf lesult ilr a risk of tire or e_ectrie shock.
17.Ol}}eet arrd Liquid Errtry-Never push objects of airy kind
imo this TV/VCR through openings as they may touch dal>
gerous voltage poims or shoJt out parts that could restdt in
a fire or electric shock. Never spill liquid of any ki_rdon
tile TV/VCR.
lg.Servieing-Do not attempt to service this TV/VCR yourseK
as opellJ!)g or rettlovJl)gcovels may expose you to dallger-
ous voltage or othe_ hazards. Re%r all servicing to quali-
tied service persolmel.
19,Damage Requirirrg Service-Unplug tl;is TV/VCR fl'om
tile wan out_et and lefe! servicing to qualified selvice pe>
solme_ trader the lollowilrg conditions:
a. When the powe>supply cord or p_ug is damaged ol h'ayed.
b. [f _iquid has been spilled, or objects have 1allen imo the
TV/VCR.
c. [f tile TV/VCR tlas been exposed to _ai_r or water.
d. [f the TV/VCR does _lot operate _rornlaHy by foHowh/g the
operati_rg i_rstructio_ls, Adiust o_rly those comrols that are
covered by the operating i_rstructions, as h*lprope_ adjust-
me_lt of other controls may lesuk in damage and win ol_e_l
require extelrsive work by a qualified teclmician to restore
tile TV/VCR to its normal operation,
e. K the TV/VCR has been &opped o_ damaged ill any way.
f. Wheat the TV/VCR exhibits a disth_ct change in per%r-
mmlce-tMs indicates a need k_r service.
20.Replacement Parts-When replacemem parts are require&
be sm'e the service technician has used replacement parts
specified by tile manufacturer that have tile same characte>
istics as the origina! part. Unauthorized substitutions may
result i_rfire, electric shock, injury to persons o_other haz-
ards.
21.Safety Cheek-Upo_r completion of ally service or repairs to
this TV/VCR, ask tile service tech]ficia_l to per%_m routine
salety checks to determine that the TV/VCR is in proper
operati_rg condition.
22,Heat-This TV/VCR product should be situated away fwm
heat som'ces such as ]adiators, heat legisters, stoves, or
other products (including amplifiers) that produce heat.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH W_DE BLADE OF PLUG TO W_DE SLOT, FULLY
iNSERT.
ATTENTION: POUR EWTER LES CHOC ELECTR_QUES, INTRODUIRE LA LAME LA PLUS LARGE DE
LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU'AU FOND.
- 3 - EN
IK(}9
Fur safe operation aud satis_._ctory per_bnnauce of
your TV/VCR, keep the _bHowing in miud wheu
selectiug a place fur its iustaHatiuu:
® Shield it from direct sunlight aud keep it away
fmr_? sources of iuteuse heal
® Avuid dusty or humid places.
® Avoid places with iusufJt?cieut veutilNiou fur proper
hen dissipatk_u. Do uut block the ventilatiuu holes
a/the top and bottom of the uuit. Do uut place the
unit uu a carpet because this will block the veutila-
tion hules.
* lustall uuit iu a hurizoutal positiou.
* Avokl lucatious subject to stroug vibratk_u.
® Do uot place the TV/VCR uear s/ruug magnetic fields.
* Avukl moving TV/VCR to lucatiuus where temper-
ature diffe_euces are extreme.
®Do uot haudle the power cord with wet hauds.
®Do uut pull uu the power cord wheu discouuectiug
it from au AC wall outBet. Grasp it by the plug.
®If, by accideut, water is spilled ou your uuit, uuplug
the power cord immedia/ely aud take the uuit to our
Authorized Service Ceuter tbr servicing.
®Do uot put your fiugers or objects iuto the
TV/VCR cassette huldel:
* Do uut place auythh_g directly uu top of the uuit.
Moisture coudeusatiou may occur inside the unit
wheu it is moved [?ore a cold place to a waml phce,
or after heatiug a cold room or under couditious of
high humidity. If a tape is played in a TV/VCR
which has moisture, it may damage the tape aud
TV/VCR. Therefore when the condeusatkm occurs
iuside the uuit, turu the POWER buttou uu aud aHuw
at Beast2 hours tbr fl3euuit to dry out.
IMPORTANT COPYRIGHT INFORMATION
Uuauthurized recordiug or use of broadcast tdevi-
siuu programmiug, video tape, fiJm or uther copy-
righted material may vk+._te app_icaNe copyright
Jaws. We assume uu mspousibility tbr the unautho-
rized dupHcatiuu, use, or ofl3eracts which hffriuge
upou the rights of copyright uwuers.
FCC WARNING- This equipment may gener-
ate or use radio h°equency energy. Changes or
modifications to this equipment may cause
harmful interference unless the modifications
are expressly approved in the instruction man-
ual. The user could lose the authority to oper-
ate this equipment if an unauthorized change
or modification is made.
This equipment has beeu tested aud tbuud to com-
ply with the limits [br a Class B digital device, pur-
suant to Part 15 of the FCC Rules. These Hmits ale
designed to provkte reasom_Ne protectiuu agaiust
harmful iutertereuce in a resideutial iustaHafiou.
This equipment generates, uses, aud can radiate
radio frequeucy energy aud, it not iustaHed aud
used iu accordauce with the h,structk>us,may cause
harmftl_ iulericmuce to radio colnmuuicationso
Howevel; there is uu guarautee thai iuter[crcuce
will uut occur in a particular installation. If this
equipmeut does cause harmful iuterference to
radio or television receptiou, which can be deter-
mh_ed by tumh_g the equipmeut off and ou, the
user is eucouraged to try to correct ttue hlterter-
euce by one or more of the foHuwh_g measures:
1) Reorient or rdocate the receiving auteumt.
2) Increase the separatiuu betweeu fl_e equipmeut
and receiver_
3) Connect the equipmeut iuto an uutJet uu a cir-
cuit diftemul from that to which the receiver is
couuected.
4) Cousult the dealer or au experieuced radiu/TV
techuiciau R_r help.
The serial uumber of this product may be _buud uu the back of the uuit. No other TV/VCR has the same serial
uumber as yours. Yuu shuuH record the uumber aud other vital iuformatiou here and retain this book as a per-
maueut record of your purchase to aid ideuti ficatiuu iu case of thefL Serial uum bets are uut kept uu fiJe.
Dale of Purchase
Dealer Purchase from
Deah7 Address
Dealer Phuue No.
Model No.
Serial No.
- 4 - EN
IK09
[] IMPORTANT SAFEGUARDS ............. 2
[] PRECAUTIONS . ....................... 4
LOCATION ............................ 4
AVOID THE HAZARDS OF ELECTRICAL
SHOCK AND FIRE ...................... 4
WARNING ............................ 4
[] PLAYBACK ........................... 17
NORMAL PLAYBACK ....................
AUTO REPEAT PLAYBACK ...............
SEARCH ...............................
STILL PICTURE .........................
PICTURE CONTROLS ....................
[] FEATURES ............................ 6
[] SUPPLIED ACCESSORIES ............... 6
[] OPERATYNG CONTROLS AND FUNCI¥ONS 7
[] PREPARAIYON FOR USE ................ 9
ANTENNA!CABLE CONNECTIONS ....... 9
INSTALLING THE BATTERIES ........... ]0
EXTERNAL INPUT MODE .............. ]0
[] SET UPFOR USE ..................... 10
CHANNEL SET UP FOR THE FIRST TIME .] 0
CLOCK SET UP (AUTO / MANUAL) ...... ] ]
CHANNEL SET UP AGAIN .............. 12
DELETING (OR ADDING) CHANNEL ..... 12
SELECTING THE LANGUAGE ........... 13
DAYLIGHT-SAVING TIME .............. ]3
[] TV OPERATION ....................... 14
WATCHING A TV PROGRAM ............ 14
GAME MODE ......................... 14
DEGAUSSING ........................ 14
PICTURE CONTROL ................... 14
CLOSED CAPTION SYSTEM ............ 15
V-CHIP SET UP ........................ 15
[] RECORDING ......................... 20
NORMAL RECORDING ................. 20
SKIPPING UNWANTED SCENES DURING
RECORDING ......................... 20
OTR (One Touch Recording) .............. 20
TIMER RECORDING ................... 21
TIMER PROGRAM EXTENSION ......... 22
HINTS FOR AUTOMATIC TIMER
RECORDING ......................... 23
AUTO RETURN ....................... 23
WAKE UP TIMER ...................... 23
SLEEP TIMER ......................... 24
[] COPYING A VIDEO TAPE ............... 24
[] ON SCREEN DISPLAY ................. 25
[] SPECIAL FEATURES .................. 25
REAL TIME TAPE COUNTER ............ 25
AUT() REWIND-EJECT ................. 25
[] MAINTENANCE ....................... 25
[] TROURLESHOOIYNG GUIDE ........... 26
[] SPECIFICATIONS . .................... 27
[] CABLE CHANNEL DESIGNA_I¥ONS . ..... 27
[] WARRANTY ................... Rock Cover
CONTROLES DE OPERACI(}N Y INSTALAClg)N DE LAS PILAS ............. 30
SUS FUNCIONES ........................ 28 PREPARACION DE CANALES POR
CONEXIONES DE ANTENA/CARLE ........ 30 PR1MERA VEZ .......................... 31
MODO DE ENTRADA EXTERNA ........... 30 AJUSTE DEL RELOJ ..................... 31
A NOTE ABOUT RECYCLING
TMs product's packaging materials are recydable and can be reused. Please dispose of any materials in
accordance with your lucal recycling regulations.
Batteries should never be tlH:owu away or inch_era/ed but disposed of in accordance widl your local regula-
tions concerning chemical wastes.
- 5 - EN
IK09
® Infrared remote controm
® BiHnguN on screen menu dispmay semectaNe in
Engmish or Spanish
® Real time counter=This shows tile elapsed record-
ing or playback time in hours, minutes, and sec-
onds. The '-" indication will appear when the tape
is rewound fuJlher than the tape counter position
0:00:00".
® 181 channem capability PLL frequency synthesiz-
er tuner with direct station caH=(A conve_ler may
be necessary to view scrambled cable channels.)
® Auto Clock Setting=AHows you to set the clock
function from a PBS broadcast station.
® Closed caption system=You may view specially
Babeled (cc) TV programs, movies, news, prere-
corded tapes, etc_ with either a dialogue caption or
text display added to the program.
® Game mode=Automatically sets external input
mode and allows TV/VCR display to be suitable
tbr use with TV games.
® Auto power on and off system=Automatically
turns on the TV/VCR whe_ you insert the cassette,
turus off after auto-rewind, and ejects when the
beginning of the tape is reached.
® Auto rewind when the end of a tape is
reached=TMs function doesn't occur when using
tft_ler recording.
® 2 Step picture search operation=You can view' a
video program at a high speed or super high speed
in either a forward or reverse direction in LP and
SLP mode. For SP mode only high speed.
® Three different Nayback tape speeds : SP/LP/SLP
® Two different recording tape speeds : SP/SLP
® Auto Head Cmeaner=AutomaticaHy deans video
heads as you insert or remove a cassette.
. Zero Return=The tape returns to counter of
0:00:00 by rewinding or fi_st forwarding.
® Still=' Freeze '' the picture a/any time, [br close
viewing of a pallicular scene. ()niy tapes recorded
in SLP mode will show a _).drly clear picture.
® Digitam Auto Tracking (DTR)=Automatically
adjusts the tracking for each tape you play.
* Rental Nay mode=Improves playback picture
quality from worn tapes, such as rental tapes.
® Auto repeat=AHows you to repeal tile playing of a
tape h_defiuitely without pressh_g the PLAY button.
® Time search-Let you set the TV/VCR to advance
the tape by entering the desired playback time you
® OTR (One Touch Recording)=[nstant timed
recording trOll] 30 to 480 mhmtes is possible a/the
push of the REC/OTR button.
® 1 Year, 8 events (including Daily and Weekly
Timer Recording)=The buift-in timer alk>ws you to
record up to 8 programs a/different times on dif-
ferent channels up to I year in advance. The Daily
timer allows recordings to be made of daily broad-
casts, and the Weekly timer allows recording to be
made once a week up to the end of the tape.
* Auto return=After timer recoNing is finished, tile
TV/VCR can return to the begimfing of the record-
ing.
* Wake up/Sleep timer=AHows you to have the
TV/VCR automaticaH y turn on or off a/a desired
tftne.
® Timer Program Exteneion=AHow you to shift the
time schedule for automatic timer recording.
® V-CHiP=Enables parents to prevent their cMldren
from watching inappropriate material on TV.
1
Remote Control Unit 2 AA Batteries Rod Antenna
1
PART NO. (0EMN00673 or
PART NO. (N0154UD) 0EMN01599 or
0EMN01755) °':_
® [f you need to replace these accessories, please refer to the PART NO. under the illustrations and call 1-800-
968-3429.
® Depending on your antenna system, you may need different types of Combiners (Mixer) or Separa/ors
(Splitter). Contact your k_cal electronics store for these items.
® We do not recommend the use of universal remote contrds. Not aH of the functions may be controlled with
a universal remote control l[f you decide to use a universal remote control with this unit, please be aware
that the code number given may not operate tMs unit. l[i_this case, please calB the manufacturer of the uni-
versal remote control.
- 6 - EN
IK09
This manuaU covers 13" and 19". The operation of the two modeUs are exactUy the same except
the appearance. 13" modeU is HUustrated in this manual
NOTE:
® We do not recommend die use or universal remote controls. Not all or file [unctions may be controlled wid]
a universal remote control
[f you decide tu use a universal remote cou[rol wifl_ this unit, please be aware d]at die code number given
may not operate dUs uniL In dfis case, please ca]] the manufacturer of the universal remote control
-TWVCRFRONTPANEL-[F g. l
OOO 1
/
[
1 2
- REMOTE CONTROL - [Fig.2]
15
16
17
8
11
18
19
20
POWER
DISPLAY MUTE
3 4
..............25
............................
..........................3
...............
............................10
.....................22
.........21
5 6 7 891011 12 1314
-7 -
! VIDEO input jack- Cuuuec[ [u the video output
jack o[ your video camera or anod]er VCR.
2 AUDIO input jack- Com_ec[ to the audio output
jack of your audio equi preen t, video camera or
another VCR.
3 POWER button- Press [o turn TV/VCR on and
ot]. Press tu acdw_[e _imer recording.
4 VOLUME k / V buttons= Adjust the volume
_evel.
S CHANNEL _ / V buttons- Press _o select [he
desired channels tbr viewing or recording.
Yuu may display d_e mah_ menu on d_e TV screen
by pressing repeatedly this but_un on the
TV/VCR.
TRACKING function- Press to mhfimize video
noise' (lines or duts on screen) during p_ayback
mode. (See pate 19.)
6 Remote Sensor Window- Receives d_e infrared
signals fl'om die remote control.
7 STOP / EJECT button (TV/VCR)- Press [u stop
the _ape motion. Press in die Stop mode _()remove
tape fl:om TV/VCR.
STOP button (remote contro0- Press tu s_up the
tape motion.
EJECT button (remote contro0- Press to remove
tape trom TV/VCR.
button-
Press to select setting modes from the on screen
r_lenLL
Press _oenter digits when set[iug program.
(for example: setting clock or timer program)
EN
IK(}9
- REAR VmEW- [Fig.3]
26 27
8 REW button- Press to rewind the tape, or to view
the picture rapMly h_ reverse duriug playback
mode. (Rewiud Search)
button-
* Press to select a mode fi'om a particular menu.
(%r example: LANGUAGE or USER'S SET UP)
9 PLAY button- Press to begiu playback.
A button-
® Press to select settiug modes flxml the ou screen
menu.
® Press to enter digits wheu setting program.
(for example: settiug clock or timer program)
1(_ KFWD button- Press to mpidJy advauce the tape,
or to view' the picture rapidly iu forward duriug
playback mode. (Forward Search)
button-
® \_len settiug program (for example: setdug dock
or timer program), press to determiue your selec-
tion aud proceed to the uext step you waut to
iuput.
® Press to determh_e settiug modes fl:om ou screen
mentL
® Press to select a mode hom a particular menu.
(for example: LANGUAGE or USER'S SET UP)
11 RED button= Press for manual recordiug.
OTR button-Activates Oue Touch Recordiug.
(only ou the TV/VCR)
12 RECORD indicator= Flashes during recordiug.
Lights up iu the Staud-by mode for Timer
Recordiug.
13 EARPHONE jack= Counects to earphoues (not
st,pplied) for persona_ listeniug. The size of jack is
1/8" monaural (3.5ram).
14 Cassette compartment
1S Number buttons= Press to select desired chanue]s
tot viewh_g or recordiug. To select chanuels from
I to 9, first press the 0 buttou aud then I to 9.
+100 button= When selectiug cable chauuds
which are higher thau 99, press this buttou first,
then press the hst two digits. (To seJect chauuel
125, first press the +100" buttou then press 2"
aud '5").
16 NENU button- Press to display the maiu meuu ou
the TV screen.
17 DISPLAY button-Display the counter or the cur-
rent cbanne_ number and current time ou the TV
screen. (See page 25.)
18 SPEED button= Press to choose the desired
recordiug speed:SP/SLR
19 T-PROG. CLEAR button= Press to caucd a settiug
of timer program. (See page 23.)
COUNTER RESET button= Press to reset couuter
to 0:00:00.
20 GAME button= Set the game mode and exteruM
iuput mode at the same time. (See page 14.)
2ii TIRE SEARCH button= Press to activate Time
Search mode.
22 PAUSE/STILL button= Press to temporarily stop
the tape during the recordiug or to view a still pic-
ture duriug playback.
23 NUTE button= Mutes the souud. Press it agaiu to
resume souud.
24 CHANNEL RETURN button= Press to go back to
fl_e previously viewed chanuel. For example,
pressh_g this button ouce will change chaune] dis-
play from 3 (present chanuel) to 10 (prevk_usly
viewed channel), aud pressh_g it a secoud time
will returu from 10 to 3.
25 WAKE UP/SLEEP button= Sets the Wake up or
Sleep TimeJ: (See page 23.7
26 Power cord= Couuec[ to a staudard AC outJet
(120V/60Hz).
27 ANT. terminal- Couuect to au autenua or cable
system.
- 8 - EN
IK09
Satellite Box or
Cable Box I
(Net supplied)
From
Cable S_
From Cable System or
75-ohm CoaxiN
Oabie (Not supplied)
ANT
VHF/UHF
or Combiner
(Not supplied)
or
Fiat twin-lead cable
<O/W] >df7
The VHF/UHF Rod Antenna (supplied with 13"
model only) is detachable. _[nsert the stem of the anten-
na into the hole on the upper-back portion of the
TV/VCR. Connect the VHF/UHF Rod Antenna or
VHF/UHF Combination Antenna to the ANT. terminal
of the TV/VCR as shown in the diagram above. For
fl3e best reception, fully extend the VHF/UHF Rod
Antenna and make the necessary adjustments. (Avoid
toucMng the top section when adjusting.)
NOTE:
Betbre plugging the Rod antenna into antenna termi-
nal, check that the pin is not bent. If it is bent,
straighten the pin as illustrated, then pklg the pin into
antenna terminal.
Bent pin
\
Cable Plug
(Needs to be straightened) (Straight pin)
NOTE:
The connectkm of an indoor antenna may not always
give acceptable TV reception.
HI iiH SEfi 77:A/<Tk>/hAS
h_ some areas it will be necessary to use an outdoor
antenna.
('4/;J]:, ( <'?< "/:,UJLk"i
,I>]:,5;(,f_;t/_;'_];;1:,/_ I;_,'_,_
Use this connection ifyour cable system connects
directly to your TV/VCR without a conve_ler box.
By ush_g this c(mnection you can:
1) Use the TV/VCR remote to select channels.
2) Program one or more unscrambled channels tbr
Automatic Timer Recording.
NOTE: This unit wilB ONLY record and view' the
same channel
<4 :, (#');'_7,'< ':,:t?
If your cable service supplies you with a converter
box or if you use a satellite system, you can use the
basic connection shown here.
By using this connection you can also record scram-
bled channels. HoweveJ; channel seJection must be
made with the converter box or sa/eHite box. This
means that cham_els cannot be changed using the
TV/VCR Remote Control. Unattended timer record-
ing is limited to one channel at a time.
Note to CATV system installer:
This reminder is provided to calBthe CATV system instalBer's a/tention to Article 820-40 of the NEC that
provides guidelines [br proper grounding and, in pallicular, specifies that the cable ground shaIBbe connect-
ed to the grounding system of the building as close to the poh_t of cable entry as practbal.
- 9 - EN
lK(}9
TO RECORD A SCRAMBLED/UNSCRAMBLED
CHANNEL
1. Set the TV/VCR channel selector to tlle output
channel of file Cable Convelter Box or Sa/elHte
Box. (Ex. CH3)
2.Sebd tile channel to record flxml your Cable
Converter Box or Sa/eHite Box,
When using an extemaJ input signal (anodler VCR or
video camera), connect the phyeFs audio/video out-
put cables to ttle AUDIO IN/VIDEO IN jacks of
your TV/VCR. Then press die CHANNEL A or T
butKm until AUX" appears on die screen.
NOTE: "AUX" is found below die
k)west memorized channel. AUX
(Example: CH2)
1)Open tile ba/tery comparmlent cover by pressing
the cover on die remote unit in die direction of the
arro w.
2)Insert 2 "AA" penlight batteries hlK) ttle battery
compartment in die direction indicated by die
polarity (+/-) maHdngs.
3)Replace tile corm:
SET LiP FOR [SE
You can program the tuner to scan all tlle channels you receive hi your area.
NOTE: Channel memoLv programmhlg is NOT needed when conneded K) a cable box or sateWte box. Just
select die TV/VCR channel selector to the output dlannei of the cable box or satellite box (Ex CH3). Then
select die channel t() be viewed on tile Cable Box or Sa/eHite Box.
Plug die TV/VCR power cord into a
standard AC oudeL
OTE:
NIf some digits appear in tile corner of
die screen, press file POWER butKm
WidlOUt unplugghlg tile power cord.
Press die POWER button to turn on the TV/VCR
Select ENGLISH" or _E_
"ESPANOL"=Spanish using die _.O_G_
[ENGLISH] ESPANOL
EFWD/_ or REW/'_ button. "[ 1"
AUTOPF/ESET
indicate tile selected language.
The tuner scans and memorizes aH active channels m
your area.
NOTES:
®The TV/VCR distinguishes between standard TV
channels and cable channels.
®If you want to play or record a video tape
BEFORE preset@lg tile tuner, you must press tile
MEN[.; button on the remote control. To preset tile
tuner again, see "CHANNEL SET UP AGAIN" on
page 12.
®The TV/VCR may memorize TV channels as
CATV channel s if reception condition s are poor. If
flliShappens, try die AUTO MEMO action again
when reception conditions are bette_:
:5' After seam/ rig
Tile tuner stops on die lowest memorized channel.
If you want to recall the selected channels, you can
sebd die desired c]lanne] direcdy Widl file remote
control number buttons or CHANNEL A or _.
" SET UP
Press tile PLAY/A or STOP/_' but- L_"GU_{_E
(_ [ENGLISH] E ;PANOL
ton K) point to AUT ) PRESET".
Then press tile F.FWf)/_ button. _ _u_O_E_E_
- _0 - EN
IKO9
Tg9S;< I: TA AS£A!/{Z} ,
You call select tile desired channel by using the
CHANNEL A or T button on or dimcdy pressing
the number buttons on the remote control.
Note R)rusing die number buttons:
®When selec@]g cane channels wMch are Mgher
than 99, press the +100 button first, diem press tile
last two digits. (Example: to select channel 125,
first press tile +100 button then press "2" and "5").
®You must proceed sh]gle-digit cham]d numbers
with a zero (Example: 02 ... 09).
The TV/VCR clock must be set correctly heR)re
VCR diner recording is possible, h is suggested that
the dock be set manually when first setting up die
TV/VCR, Then, set to [on]die auto dock setting
whidl will period bah y correct the setting if neces-
sary.
NOTE: [f you cannot receive a staqou will] time
signals, auto clock setting cannot be per[brined. Use
manual setdug only.
4fANcifUL<kO<TASETYTAY7
Make sure ...
®The TV/VCR is turned on.
In the example below, the _lock is to be set to:
DATE May 6th, 2003
SETTING TIME 5:40PM
Seect SETT_,/G CLOCK ME._,
Press tile MENU button on the PICTuRETIg'IERPROGRAMMINGcoNTROL
SETTING CLOCK
reillote Coutr(J. CHANNEL SET UP
USERS SET UP
V CHIP SET UP
Press the PLAY/_. or STOP/'V LANGUAO_[E"_L'_]
CAPTION OFF]
ZERO R E]_JRN
button topoimtoSETTING TIMESEARCH
CLOCK".
Then, press the EFWD/_ button.
2 5_::<,_c/VIANUA/.CLOCK SET"N_OLOO_
d_ ,, ,,y AUTO CLOCK [ON]
/>_ _2 £ AUTO CLOCK OH SEARCH
AUTO CLOCK OH [02 ]
Press the PLAY/_. or STOP/_' _ ',_ANUALCLOCKSETDST [OFF]
button to point toMANUAL
CLOCK SET".
Then, press the EF\VD/_ button.
{_ Seect th® _/o st// MANUALCLOCKSET
Press the PLAY/_ or ST()P/'_ _,o,_OA_ _EA_
button until your desired mouth
appears. (Example: May -->05) ...........
Then, press the KFWD/_ button.
_ Seect tS@ day bIANUALCLOOKSET
Pressthe PLAY/a, or STOP/_" but- ,_.T.0A_ YEAR
ton until your deshled day appears. 0_
(Example: 6th --> 06) ..........
Then, press die EFWD/_ button.
,##:S@}eci t e yi_S/ IdANUALCLOCKSET
Press the PLAY/_ or STOP/_ but-
ton until your desired year appears.
(Example: 2003)
Then, press the EFWD/_ button.
_ S@ @C/: t}@ }]OI / MANUALCLOOKSET
Press the PLAY/A or ST()P/_ but- ,_.,H0A_ YEAR
tonuntil your desired hour appears. 0..... TUE....
(Example: 5 PM) .ou......
......05 : PM
Then, press the EFWD/_ button.
_D@{; ,Z /_z} 1/_ @ MANUAL OLOCK SET
Press tile PLAY/_ {)17STOP/_' but- MONTH OAY YEAR
tonuntil the desired miuute ...... TU_....
HOUR MINUTE
appears.(E amp e:40) >0 M
8 star the cock ...._M
Pressdie MENU button on file
remote control.
AH]ough seconds are not dis-
played, they beghl counthlg []:ore
00 when you press the MENU button on tile remote
control. Use this _eatureto synchronize the clock
with the correct time.
NOTE:
Wheu unpklggiug the AC cord or if there is a power
thi]ure R)rmore dlau 3 seconds, you may have to
reset die clock.
70 EH <;E<£0<£ SET7/Ai<;
ifyou warntochangetheclocL
)FollowstepsIllaud[%
2)Selectwhereyou wanttochangeusingdle
EFWD/_ or REW/_'_ button.
3)Enter correct numbers using the PLAY/,& or
STOP/_" button.
4)Press die MENU button on the remote coulrol to
star_ the dock.
PLEASE NOTE:
If there is uo local PBS staqou in your area or on
your cane system, select "AUTO CLOCK" and
press the EFWD/_ or REW/_ button to turn [OFFI
tMs [uuctk)u. Then you can manually adjust the
clock.
11 EN
[K09
A 7'F'OM,477U _ /,0{" A, S/sT?IiU
Make sure ...
®The TV/VCR is turned on.
® C(!uf]rm ttIe TV/VCR is receiving a RF (Radio
Frequency) signal hOln either an anteuua or cable
system connection using the ANT IN jack on the
rear of the TV/VCR.
NOTE:
®If a cane converter box is being used, make sure it
is powered ou.
* You must use the TV/VCR remote control to per-
tbrm tile clock setting procedure.
®If the TV/VCR is counected directly to a cable
converter box or satellite box, tile k/cai PBS station
must be selected on the cane box itself, arid Hie
TV/VCR must be set to the output chamlei of tile
cable converter box or sa/eHite box (usually cllan-
nei 3 or 4), to be able to set up or correct the clock
Press the MENU button on the
remute control. _aENU
TIMER PROQRAIdMING
Press the PLAY/A or STOP/_v but- P_CTURECONTROL
SETTING °LOCK
(_ __ CHANN EL SET UP
ton to select "SETTING CL )CK . U_ER_E'U_
V CHiP SET UP
LANGUAGE ENGLISH
Press tile EFWD/_ buttou to enter CAPTONoPF
ZERO RETURN
SETTING CLOCK" menu. ",ME_=o_
NOTE: During Auto CLick CH Search, the picture
may be distorted. TMs is nommL
Press the MENU button on the
remote control.
Press the PLAY/_ or STOP/_
button to select SETTING
CLOCK'L
Press tile EFWD/_ button to
select setdug dock,
Press {lie STOP/_ button to select
"AUT() CLOCK CH".
Press tlte EFWD/_ or REW/_'_
buttons until you locate Auto
Clock Set station numbe_: See item
3 above.
_. MENU
TIMER PROGRAMMING
PICTURE CONTROL
SEITING CLOCK
OHANNELSET UP
USER'S SET UP
V CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION _FF]
ZERO RET RN
TIME SEARCH
SE_TING °LOOK
AUTO CLOCK [ON]
AUTO CLOCK OH SEAROH
AUTO CLOCK CH [ 4B]
MANUALCLOOK SET
DST [OFF]
Press the MENU button to exit the screen.
Once the TV/VCR is mrued off, it will periodically
check and set the correct date and time.
2 % 0 ..........K ,,, .,£,
Press the F.FWD/I_ button until
AUTO CLOCK tONI appears.
_,,_,,,,,,,,,,,_,__,,,,,_,,,,,,,,,,,,,,,,,,,,_,,,,,,_ ,__,,,_ i,,,,,,__,,,__ ,__,_,,,,,,,,_,_i,,,,,,_,,,,,,,,,,,_i,,,,,,_i,,,,,,,,,,,,,,,_,,,__,,,,,,,,,,,,_,_,,,,,,_,,,,,,,,,,,,,,,,,,,___
/!_ Be{]i 7,'_ " ,"' { 4 <= _:SI
Press the STOP/V button to select AUTO CLOCK
CH SEARCH".
Press the F.FWD/_ button, sE,_,,_OLOO_
* The TV/VCR is now searcMua_ Auto.................o_oo_ _Rok°"
fin: tile station wMch contahl tile AUTOOLOO_O_[0_]
bIANUAL CLOCK SET
auto clock set signal. The search D_T [o<
tin: a signal may take up to 20
seconds per chamlel.
*"_ _" appears at the lower left (if
tile screen when tile search has aUTOOLOOKOHSEAROH
ended. 0a_o_:,
®Auto Clock statiou- write down
tile number(s) that appear on tile
screen, These are the autu dock
station(s) in your area. See item
4 below.
®[f no number(s) appear on the TV screen, there are
uo stations iu your area wliMi contain the Auto
Clock sigual. Auto Ck/ck Setting is not pussible.
PIease use Mmmal Clock Setting on page 11.
Press the MENU button to exit the screen.
Ma_e S_Fe ...
* Press the POWER button to mm on die TV/VCR.
.......... _,_, r- ',Ixv UIc)
4Y +,=,
Press the MENU button on the
reino[e control
Press the PLAY/A or STOP/_ but-
ton to poht to CHANNEL SET
UP",
Them press the EFWD/_ button.
_. MENU
TIMER PROGRAMMING
PlCTURE CONTROL
SE]_ING CLOCK
OHANNELSET UP
USER'S SET UP
V CHIP SET UP
LANGUAGE _NGLISH
OAPTON O F
ZERO RETURN
TIME SEARCH
2,.,,D:e',_ s.t: i: ese
Press tile PLAY/_. or STOP/V but-
ton to point to "AUTO PRESET'L
Tlleu, press tile EFWD/_ button.
The tuner scans and memorizes aH
the active charmds in your area.
_. CHANNEL SET UP
ADD DELETE OH TV)
AUTO pRE ;ET
'? ARe s<u:t2/_ 'g
Tile tuner st(tps on tile lowest memorized channel.
12
The cllamle]s you no longer receive or seldom watch
can be deleted h:om tile memory. (Of course, you
can add tile deleted channel into tile memory %aiR0
EN
IK09
S_:_<ct C/{A[qNEL SET UP
Press the MENU button on d_e
remote conm}l.
Press the PLAY/A or STOP/'_ but-
vm to poh_l to CHANNEL SET
UP".
Then, press the EFWD/_ button.
MENU
TIMER PROGRAMMING
P_CTURE CONTROL
SETTING CLOCK
CHANNEL SET tJP
USERS SET UP
V CHIP SET UP
LANGUAGE ENGLISH
CAPT ON O_F
ZERO RETURN
TIME SEARCH
Sdect ENGLISH" or ESPANOL = S-inrush lsmg
the EFWD/_ or REW/_ button.
Press die MENU button on die remote comrol to
retm]_ t(_ TV mode.
2 Se®<t A©D/DELETE C/4 CHANNELSETUP
Press d_e PLAY/_. or STDP/_ bW- ADD/DELETECH(TV)
ton to point to "ADD/DELETE AUTO'RESET
CFL
Press d_e EFWD/_ button.
NOTE: If %r some reason d3e menu is in Spanish,
press d_e MENU button on d_e remote control, press
the PLAY/A button to point to IDIOMA
[ESPANOLI", d_en press the EFWD/_ button, then
press d_e MENU button on d_e remote conrail
,3 Dse' the des _ed char'l,S÷/_u>be_:
Press the PLAY/_ or STDP/_ bre-
ton undl your desired channel num-
ber appears. (You can also use d_e 0s
number buttons or die CHANNEL
_./Y button to enter it) (Example: ADD DELETE
CHS)
4 Deete (or add} t !'_om ( r_to}/r;e >oW
Press the EF\¥D/_ or REW/_ button. The channel
number changes _o light red. The charnel is ddeted
from memory.
® Todelete anod_erclmm_eLrepeat steps131and [41.
® [f you press the EFWD/_ or REW/_ button
again, the chgumel is memorized again.
Added channel: Light blue.
Deleted channel: Light red.
[}: Extthechgmaa set_sp /r ode
Pressthe MENU button on die remote co,mx>lto
returns to TV mode.
NOTE: To confirm tlla/cham_el(s) has beendeleted
or added, press fl_eCHANNEL _ or _ button.
MuLe sure ...
®Press the POWER button to turn on fl_eTV/VCR.
NOTE: This function effects only the language on
the screen menu and not the audio source.
S÷,>ti '/...ANG AG_;I:....
I_ MENU
Press tile MENU button on the T'_ER_ROORAMM'_O
PlCTU_qE CONTROL
remote con [rol, EL]rINGCLOCK
CHANNEL SET UP
USER'S SET UP
Press die PLAY/A or STOP/_ but- ,CH,P_E,,_ ....
LANGUAGg ENGLISH
) CAPTION OP]
ton to omt to LANGUAGE . ZERORET_RN
TIME SEARCH
Select d_is feature and the TV/VCR's clock automati-
cally will advance one hour in April, d_enreverse one
hour in October.
When Daylight-Saving Time is ON, the clock will
change automatically as fdk>ws:
® First Sunday of April :At 2 AM tile clock imme-
diately changes to 3 AM. Any timer programmh_g
you have set to occur between 2 AM and 3AM
will not record.
® Last Sunday of October : At 2 AM d_eclock
immediately changes to ] AM.
Make sure ...
* Press d_e POWER button to turn on the TV/VCR.
>a ec ::,B t._,,,.L,3CK
Press the MENU button on d_e
remote control _ENu
TIMER PROGRAMMING
PICTURE CONTROL
Press d_e PLAY/& or STOP/T but- SETTING CLOCK
CHANNEL SET UP
[o_1to point to SETTING vUSERSSETUPcHIPSET UP
LANGUAGE ENGLISH
CLOCK". ......._
ZERO RETURN
TIME SEARCH
Then, press the EFWD/_ button
?,
£? S,'_Ci_"*"............
.J.:,.. [ nw: to }...,.,
Press the PLAY/,& or STOP/T but-
ton to point to D.S.T.". I_ AOTo_'ETT'NGCLOO'_'LO_,__ON]/
Then. press the EF_VID/_ or AUTOCLOC_C_ SEARCH
AUTO CLOCK CH [ O2 ]
REW/_'@ button until [()NI appears. _............ ....
DST ...... [ON]
?
Pressd_eMENU buttonon d_eremo_econtrolto
remm toTV mode,
77iWL
Repeat steps [11 to [21, select [OFFI using the
EFWD/_ or REW/_ button.
13 EN
I K09
2 S÷®ct t_s÷ c _at_ '_÷ r_u _sb÷__
Press the CHANNEL A or T button to select your
desired channel number or press file number butt(ms
on the remote contrnl.
Remember: If the TV/VCR is connected tn a cane
box or satellite box, the TV/VCR must be on CH3 or
CH4, then fl_e cllanne] to be viewed must be selected
on file cane box or satellite box.
3 Ad _:t souv;d
Press the VOLUME A or V buttnn
to adjust the volume.
VOLUME 2O
NOTES:
® Procedures must be R)lk)wed within 5 seconds or
the Picture Control mode will be cancelled.
® When setting the Picture Control, the Game mode
will be cancelRd.
Make. sure ...
® TV/VCR power must be turned on.
J 8<.nc P©_'/,;?IE CONT_OU
Press the MENU buttnn on file
remnte control. ME.U
Press the PLA¥/A or STOP/_' but-
ton to point tn "PICTURE CON-
TROL".
Then, press the EFWD/_ buttnn.
TMs function enables you to decrease the TV screen
contrast and making it suitable [br use with a TV
GAME.
NOTE: This function can nnt be set during recording.
Press the GAME buttnn on file
remote control. GAME" appears
on the screen.
When you press the GAME button;
®The TV/VCR comes on automatically i[ it is off.
®The TV/VCR will be hi external input mode auto-
,_ S_,_...........c,oJ yots w_; t o s<l.
PressthePLAY/_. or ST()P/T buttonuntildesh:ed
control is displayed.
BRIGHT
CONTRAST
COLOR
BRIGHT
V_V_V_V_V_V_V_V_V_V_V_V_DD_
TiNT
SHARPNESS
., _,( L ( ,If?',,,,,,,
PresstheGAME buttonor CHANNEL _.or T but-
ton on the remnte control.
Magnetism from nearby appliances might affect file
REW/_ F.FWD/_
BRIGHT to decrease to increase
CONTRAST to decrease to increase
con trast con trast
COLOR to pale to brilliant
TINT to purple to green
SHARPNESS tn sott tn clear
If this happens, move this unit away from the appli-
ance. If the color is still not correct, disconnect
power cord fror_ AC oudet then reconnect it after 30
minutes.
®If there is a power failure uf any kind+ the unit will
retain its memory for this feature.
- _4 - EN
IKO9
YoucanviewspedaHylabeled(cc)TVprograms,
movies,news,pre-recordedtapeswitheitheradia-
k)guecaptkmortextdisplay_
CAPTION mode: By choosh_g the caption mode, you
can wa/ch dramas, movies and news while captioning
the diabgues and the contents o[ news.
TEXT mode: By choosing the text mode, you can
watch half screen text inR_rmation if you want.
1-2: You may get these captions or text hfformadon
by selecting ekher 'l" or 2". Capdon 2" is used,
usually tbr a second Banguage if available.
NOTE:
Not all programs are broadcast with closed captions.
Your televiskm is designed to provide error fl:ee
close(] captions from Mgh quality antemm, cable and
VCR signab. Conversely, poor quality signals are
Hkdy to resuh in captk)n errors or no captions at all
Common signal conditions wMch may cause captions
errors are li sted below:
* Automobile ignition noise
® Electric motor brush noise
® Weak snowy reception on TV screen
® Multiplex signal reception displayh)g picture ghosts
or ah:ph)e fluttel:
® Playback of pooHy recorded or worn VCR tapes.
* [f the TV/VCR displays a Rack
box on the TV screen, tMs means [
that the TV/VCR is set to the [
TEXT mode. To dear screen, ]
select [CAPT[ONI J, [CAPTI[()N2IL
or [OFFI.
Make sure ...
* TV/VCR is turned on.
,_ENU
Press the MENU button on the P'OTuRET'_ER_O_RAM_"N_cO"TROL
SETTING CLOCK
remote control CHANNELSETUP
USERS SET UP
V CHIP SET UP
Press the PLAY/A or STOP/T but- LA"<_UAOE_'_L'_Hj
CAPTIOP OFF] ....
ZERO REg N
ton to point to CAPTI[ON'L TIMES£ARCH
TION2], [TEXTI J or [TEXT2])
Press the MENU button on the rel_lote COHtFO1to
return to TV mode.
7_ 74N_,/137///i 'L_/CEZ ('i,/_" ,U_, L}:',>Y//,W
Repeat steps [J J and [2J, select [OFFJ using the
EFWD/_ or REW/_ button. Press the MENU but-
ton on the remote control to return to TV mode.
;/?iN,_/iE ;' O'dJ) 1' :'TB)N:_/?Zi' h ?N
The On-Screen Display wtl disappear after 5 seconds.
® This is also true when the MUTE button is pressed,
and when the PAUSE/STILL button is pressed
wMle reconting.
® If there is a power fi_Alureof any kh)d, the unit will
retain its memory R)r this feature.
-C/' IP S/{7 7p
Make sure ...
® TV/VCR is turned on.
® You have the TV/VCR remote comroi.
? _Me.<t VC/,4P 9E"//
MENU
Press die MEN[.; button on the T'MER_OG_AM_,'"(_
PICTURE CONTROL
reri)ote control, SEITING CLOCK
CHANNEL SET UP
USER'S SET ill :>
Press the PLAY/A or STOP/'V but- _"VCHIPSETUP
LANGUAGE ENGLISH
_ _ CAPT ON O_F
ton to sdect V-CHIP SET UP . ZERORETURN
TIME SEARCH
Then, press the F.FWD/_ button. 'NOEX_EA_CH
<
enter the delimlt code of d_e numbers: 0000.
3 Seest 7V {:_¢CTDIG
Press the PLAY/A or ST()P/_' but-
ton to select TV RAT[NO".
Then, press the RFWD/_ button.
I v CHIP SET UP
TV RATING
M1:>AA RATING
CHANGECODE
d 51o<Id gYv1:>eg'sms
VIEW
Press the PLAY/_ or STOP/_" but- TvTV"r", , [V,EW]
o_ , _ TV G
ton to sdect TV atm_ that }or Tv_(;, , [_"_1
TV 14 ) [VIEW]
wish to block. Tv_A, , _V,EW]
*When you select the radng catego-
ry and turn it [BLOCK J, the lfigher rating will tun)
[BLOCKI automatically. ABo, tl_e lower rating will
turn [V_EWI automatically.
*When you turn "TV-Y" to [VIEWI, then aH ra_ings
will turn to [VI[EWI automatically.
Selection Rating Category Explanations
TV-Y Appropriate gor all children
TV-Y7 Appropriate R)r children seven and older
TV-G General Audience
TV-PG Parental Guidance suggested.
TV-14 UnsuitaNe R)r children under 14
TV-MA Mature audience only
15 EN
IK09
_5 _i}xt the V-O __/)s®tt a'9 _rode
Press d_eMENU butch on tlte remote comrol to
enter the setting and exit the screen
,{ IfL; _5£7 if ,P S_ lf /(_A77Y_i S
When you select the ratilgs of TV-Y7,TV-PG,TV-14
or TV-MA you will have the option of selecting sub
Sa_÷or V-O/,iP SET UP
Press die MENU button on die
remote control.
Press the PLAY/_ or STOP/_!'but-
ton 1o select ' V-CHIP SET UP".
Then, press the KFWD/I_ button,
2 E_T_@_+Au;<_;*_; o ;_? ["
Use the mmfi?ers on the remote con-
trol to enter the access code.
(Defauh code is 0000.)
ACCESSCODE
Press d_e PLAY/A or STOP/_r but- / _,_A_,N_
CHANGE CODE
ton to select 'TV RAT[NG".
Then, press the EF_VDJ_- button.
Press the STOP/_' button to sdect
the sub-rating you wish to Nock.
Then, press the EFWD/I_ button.
®When you select [TV-Y7]:
Ii_ TV Y7 [BLOCK[
FV [BLOCK]
Press the STOP/_' or PLAY/A button to sdec_
Dialog),' L"(Coarse Language),
"S"(Sexuai Situaqon}, or
"V"(Violence). Then, press the
EFWDN_ bu_ton _oselec_
[BLOCKI or [VI[EWI.
Then, press the EFWDJ_ butch to sdeG
[BLOCK1 or [VIEWI.
* When you select [TV-PG], [TV-14] or [TV-MA]:
Press H*eSTOP/T or PLAY/_ (
button to select 'D"(St ggest've t TV PG [BLOCK]
BLOCK
hod
S [BLOCK]
[BLOCK1
TV Y [VIEW]
VIEW
Note: When you select [TV-MAI. TvT....G ' [V,EW]
TV P(? DLf_VI BLOCK
I[)" doesnot appear on theTV w 14 (DLSV [BLOCK]
TV MA(LSV) {BLOCK]
screell+
®The sub-ratings which set to [BLOCKI appears
next to tl_erating category in the TV rating menu.
Press the MENU baton on the remo_e comrol to
enter the setting and exit the screen.
i s's< I
Note: To change the rating, d_e TV mus_ be mined to
-16-
a station tltat is not protected. If the (PROTECTED)
appears on die screen, please change d_e cham_el to a
stadon that is not protected.
l)Follow s_eps I11 and [21.
2)Press d_e EFWD/I_ button to select "TV RAT-
[NG'. Select a TV mdng to be unblocked by press-
mg _he PLAY/_ or STOP/'!!" button.
Then press tl_eEFWD/!_ butch to unblock tl_e
rating.
3)Press the MENU button on tl_eremote comrol to
exit ttte screen.
i _ } ?' &g/ {< ' J' 5<
t t t t
.:_,:<+' V. ;HPSlIT l;J _,u
TIMER PROGgtAMMING
Press die MENU button on die SETTINGPICTURECONTROLcLOCK
CHANNEL SET UP
remote control. USERSSETUP
v CHIP SET UP
LANGUAGE [ENGLISH]
CAPTION OFF
Press tl_ePLAY/_ or STOP/_I" but- ZERORETIRN
TIME SEARCH
ton to select 'V-CHIP SET UP'L 'NO=×_=A=OH
Then, pressthe EF\VD/_ '_baton.
[
ACCESS CODE
Use the numbers on the remote con-
trol to enter the access code. >
"1_S/®cl I4PAA I:}ICTII'IG _ VOHIPSETUP
+j
TV RATING
Press tl_ePLAY/A or STOP/T but- M_A_"NG
CHANGE CODE
ton to pohl to "MPAA RAT[NG'%
Then, press the EFWD/I_ button.
d S®/<<£ yo<l t:esi ed it® _; ( -1
Press d_e PLAY/A or STOP/T but- / V'EW
to,,topo ,,tto ,em.I.b 74
Them press [l_eEFWD_ button to { 17 [BB{O_ K]
select [BLOCKI or [VI[EWI.
Selection Rating Category Explanations
G General Audience
PG Parental Guidance suggested.
PG- 13 Unsuitable for children under 13
R Res[ricted: under 17 requires accompa-
nying parert or adul_ guaNian
NC-17 No one under 17 admitted
X Mature audience only
* When you select d_e rating category and mm it
[BLOCKI, die lAgher radng will mm [BLOCKI
autornadcally. Also, die lower rating will mm
®When you tam G" to [VIEWJ, then all ratings
will turn to [VIEW] automatically.
Press tl_e MENU button on the remote control to
enter fl?e setting and exit tl_e screen.
EN
IK09
d/JAA< :A<'<'ESS<OZ}E
To change access code, toHow the steps.
S÷_<: V-</iPgETUP'
Press tlle MENU buttou on the remote control
Press the PLAY/A or STOP/T button to select "V-
CHIP SET UP'L
Them press the EFWD/I_ button.
2 }'::Y/_?ri_ccet;s code ACCSSSCODE
Use the number on the remote con-
tr(J to eJlter the access code.
The deft.raft code is 0000.
]_ Se/ec B_{A/_GE COD_/_ VOHIPSETUP
TV RATING
Pressthe PLAY/A or STOP/V bub "_P_'_<_CHANGE CODE
ton to select "CHANGE CODE".
Then, press the EFWD/_ button.
,<f E<_te_'New code
Use tlle number buttons to enter
your desired access code in the NEWOODE
NEW CODE space. Then enter the ×x×x
CONFIRbl CODE
same code in the CONFIRM
CODE space. V-CHIP SET UP
screen appear on the screem
®If you enter wrong code, repeat step 4, making sure
you enter the same new code exactly in file confim_
code space.
,5: Ext t/e%Chp _:ettt'_9 _lode
Press die MENU button on the remote connxA to exit
tile screen.
Note: If you unplug the power code or power fi_Alure
occurs, file dmnged access code will be lost and will
return to defimlt (0000). Change your access code
again as necessary.
This TV/VCR will operate with any cassette that has the _ marl<. For best results, we
recommend the use of high-quality tapes. Do not use poor quality or damaged tapes.
®Avoid moisture. Moisture condeusaqon may occur
on the tape if it is moved trom acoM place to a
warm place o17visa versa. BeR/re ushlg a tape widl
these conditkms, to avoid danmge of the rope and
your TV/VCR, wait until tlle tape has warmed to
room temperature and the moisture has evapormed.
®Avoid extreme heat high humidity and magnetic
fields.
* Do not tamper witll the cassette mechanism.
®Do not touch tile tape with your fingers.
M SE£7_/_</A <}{SSE777:
h_sel_dlecassetteinthedirectionasshown.Pushin
gendy, but continuously, on the center-back ot the
cassette uutl it is drawn hto file TV/VCR. The
TV/VCR will automatically mm om
w,.ow :o-,-o
CORRECT WRONG
Make $_r_ ...
* TV/VCR power must be turned (;ql. yOUtO repea_ a tape hldefinitely without toucMng the
PLAY buttou.
_>ev/_i_ p_e eco _led _qse
If die erase-protectkm tab has been removed, the
TV/VCR will stall playback automatba[ly.
The TV/VCR has the auto repeat function that allows
2j_ 7'0 ""+<"'
<%1 p sy[>aC} P_7.A_g
Press the PLAY button.
Note: If any menu is activated on
the screen, the PLAY button does
not function. Press the MENU but-
ton to clear the menu. then, press
file PLAY button.
,2ig'_÷_sto/> p/aybac/4
Press tile STOP button when play-
STOP
ALL REPEAT:Repeat phyback from tile begimfing
to die end ot the tape.
BLANK REPEAT: Repeat playback fron_ tile begin-
ning to a blank part, which is blank for more tllan
]0 seconds.
Select (,IS{FiRS SET UP _,_E,U
Press the MENU button on tile TIMEAPR©GRAMMING
PICTURE CONTROL
remote control. SETTINGCLOCK
CHANNEL SET UP
USERS SET UP
Press die PLAY/A or STOP/T but- _o_,PS_uPLANGUACE [ENGLISH]
CAPTION IOFF]
ton to pointto "USER'S SET UP'. _E_O'_E'_URN.,,=_S_',_OH
Then, press the RFWD/_ button.
]7 EN
!
Press the PLAY/,& or STOP/'_' bat-],. ........ >F,
_ 44 _ _ ]" _EPEAT PLAY [ALL]ton to 1omt to REPEAT PLAY . AUTORETURN 10-[
Press the EFWDI_, ' or REW/_ ]
button repeated]} until your k
desired selection [ALL] or [BLANK] appears.
sf Bx o'/e;;e_it Pay s®t sg
Press the MENU button on the remote control to
reRm_ to the TV mode.
d Star p aybsck
Press d3ePLAY button to start fl3e Repea_ Play.
"REPEAT PLAY _" appears.
® Once you select the Repeat Play mode, it stays in
effect even a_ter you turn off the TV/VCR.
® If the Rental mode is set [ONI, the RENTAL
PLAY _" display has priority.
Repeat steps [1] and [2J, select [OFFI using the
EFWf)/_ or REW/_'_ button (m the remote control.
Press the MENU button ()n the remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this feature°
£ £ L, (#
This teature is very useftd in finding or skipping over
a particular scene on a tape. [n tMs mode, the sound
will be muted.
1)You may view a video tape at a high speed in
either a forward or reverse direction by pressing
the EFWD or REW button dinting playback, (m the
SP / LP / SLP modes)
2)Press it again and d3eTV/VCR will now search M
super high speed. (m the LP / SLP modes only)
NOTE: Tapes recorded M the SP or LP mode will
display a noise bar on d3e TV screen and the pic-
ture may mver_ to Black and White. This is nomml.
3)Press the PLAY button to return to normal speed.
Zb,£O ,_1:,f £_
This function allows you to search easily a begimfing
point that you want to review by rewmdMg or fast
Rewind or fast lorward the tape to the beghmmg
point at which you want to review_
2 Ii2e_:_:®tt_e o ) 00}
Press the COUNTER RESET button repeatedly.
..................................................................{
Press die RECORD or PLAY button_
Press the STOP button when recording or playback
is completed.
,_i " ..... , . ,,*c_::,g. ,_2 g_/' 'o<:1®
(*,/ _?(;;t ?_[#t{! gg,/ *, "_dU
Press die MENU button on the remote comr(q
Press the PLAY/A or STOP/'_ button to point to
ZERO RETURN".
Then, press the F.FWf)/_ button. _ENU
The counter will appear on the TV PlCTuRETI_iERPROGRAMMINGcoNTROL
SETTING CLOCK
screen. CHANNEL SET UP
USERS SET UP
V CHIP SET UP
LANGUAGE [ENGLISH]
The tape will automatically stop CAPTION OFF]
ZERO iqE]_RN
whe_) the co[,_nter ret[,_rns to TIMESEARCH
0:00:00.
7 £M):, S/';,'! £ H
The Time Search function makes it possibb to quick-
_y advance the tape to your desired position sM-_piy
by entering the exact amount of playback tftne you
want to skip.
NOTES:
® Time Search can be set up to a maximum of 9
hours 50 minutes (9:50) by 10 mhmtes at a time.
® This function will not operate in recording mode.
In the exanq)le below: To watch a program after 2
hour 50 minutes flom the present position, in either
direction.
8 t8 :}@,
2 Seect T/'k:E SEARCH mode
Press the TIME SEARCH button (with each push it
will i_crease by l0 minutes).
NOTE:
Zero Remm WILL NOT work on a blank tape or a
blank pomion of a tape,
Search at this point, press the
MENU button ()n the remote control.
18 EN
IKO9
By pressing die REW/_ or F.FWD/_ butt(m, die
TV/VCR will rewind or fast forward to die specified
point.
The dine counts down as die searcMug progresses.
When 0:00 is reached, die tape will start playback
7Vs &7+jY WT_< 7,//<, 77_/7 3/i+ t/7(/V +_
Press the STOP/EJECT button on the TV/VCR or
the remote control. This will delete die selected
time.
77_A CA£#,i( A)L¢! S 72Y£//;7
®Tracldug adjusmleut will be setautomaqcally
(Digital Tracldug function) when you stal_play-
bacL
® However wheu playing pre-recorded L_pes or tapes
recorded on units odier than your own, noise lines
(black and white streaks) may appear on die play-
back picture. If dfis occurs, you can adjust die
tmcldug control manually by pressing die CHAN-
NEL A or V button until ttle streaks disappeal: riP{}
return to die DTR function stop die tape once and
start playback again.
You can view a still picture on die TV screen during
playback (the Still mode). Press die PAUSE/STILL
breton during playback. Only tapesrecorded in die
SLP mode will show the least amount of lines.Press
die PLAY button to return to playback.
NOTES:
®Usually dlere will be video "noise" lines (black
aid white streaks or dots) on die screen. This is
normal.
[f die rope was (Mgmally recorded in SP or LP
mode, die still picture will be black and white M
addition to die "noise" lines.
This is not a fault of' the machine, but is a limi-
tation of a TV/VCR with 2 video heads°
®If it is left in die Pause mode for more dlau five
mhmtes, die TV/VCR will automatically switch to
file Stop mode.
N©1S£ CAiV(WT/ (7_ !), S££
This feature aNows you to reposidou or reduce die
uoise Hues of a stile picture. Press die PAUSE/STILL
button so that die noise lines change position on die
screen so you can see the picture in its entirety Widl-
out distracting noise lines.
NOTE: This feature can be activated ONLY when
viewing a tape recorded in die SLP mode. If die tape
was originally recoNed in die SP or LP mode, die
still picture may revent to black and white M addition
to die "noise bars". This is normal.
k£71('4, i©LD (7©A7#_©£
In the Pause/SfiN mode only, when die picture begins
to vibra/e vertically, stabilize die picture by pressing
die CHANNEL A or V buttou.
NOTE:
If dlere are video noise lines on die screen, repositiou
or reduce diem. Refer to "NOISE CANCEL".
£7;AT,4 PLAFi5_ _,(K
This fnugtioH enables you to mlprove
quality when playing back worn cassettes such as
rented tapes.
S÷÷ct 1,/S{7i{:_2{; S_2!TU(:> _,ENU
Press d?e MENU button on die TI_RP_OO_"N_PICT_CO_T_OL
SETTING CLOCK
rel*l]ote co_l trok CHANNEL SET UP
USERS SET UP
v CHIP SET LIP
Press die PLAY/A or STOP/T bud LANGUACE [ENGLISH]
CAPTION [OFF]
ton to pcIhlt to "USER'S SET UP". ZEROAETURNT]MESEARCH
Then, press die KFWD/_ button.
USERS SET UP
,2 S_ t_t/!q_TAUI:o !ON]
Press die PLAY/I or ST()P/_ but- RENTAL.....ON].....
REPEAT PLAY (_F }
ton to poinl to "RENTAL". _UTO_ET'_NIOFF]
Press die EFWD/_ or REW/_
button until tONI appears.
3 E t h_:F_e_ _ sett _+g
Press die MENU button on die remote control to
remm t(i die TV mode.
_# El:at p aybsck
Press die PLAY button to start playback. "RENTAL
PLAY _" appears.
®Once you select die Renlal mode, it stays in etlect
even after you turn off die TV/VCR.
T_V('/_iY(7;L 7//{+/U{_;_, 7'ML/14©D£
Repeat steps [11 aud [21, select [OFFI using die
EFWD/_ or REW/_ button on the remote control.
Press die MENU button on file remote control to
return to TV mode.
If there is a power failure of any kind, the unit
will retain its memory for this f?ature+
- 19 - EN
[K09
7 Y_O YXH: S/ I;L )S ABA SJ: 2VYI, !iI{?_?IOA'
Be%re recording, select the tape speed fl'om : SP
mode (Standard Play) or SLP mode (Super Long
Play).
The taNe below shows the maximum recording/play-
back time using T60, T120 or T160 tapes ill each
mode,
Yuu can preveul accidental
erasing of recording by
brealdug off tile tab ou d_e
back edge of file cassette.
Tape Speed Recording/Playback Time
jType of T60 T120 T160
t@e
SP mode I hour 2 hours 2-2/.¢ hours
SLP mode 3 hours 6 hours 8 hours
Note: Yuu can play back a tape recorded in LP mede
(Long Play).
Make, sure ...
®TV/VCR power must be turned on.
If you decide to record on
die tape again, cover the
hole with plastic tape,
Transparent Tape
® flsert a cassette tape with its erase prevendou tab in place, (If necessary, rewind or fast forward tile tape to
tile point at which you want te begin recordingj
NOTE: WMs unit will ONLY record and view file same channel,
Yuu can ONLY"watch the same TV pwgram thai is
being recorded.
f Select theci'_a settobe ecoded
Press the null]her buttuus ou the OH 10]
remote contlxA or the CHANNEL
A or Y butt(m,
Remember: If the TV/VCR is con-
nected to a cable box or satellite
box, the TV/VCR must be on CH3 or CH4, allen die
channd to be recorded must be sdected on the cable
box or sa/ellite box.
Press the PAUSE/STILL button tu ( _,_;_
temporarily stop recording.
/
Press the PAUSE/STILL or
RECORD button te resume record-
ing. s_
NOTES:
* After five minutes, die TV/VCR will automaticaly
switch to the Recording mude to prevent tape damage.
® If "CLOSED CAPTION (ON)" is selected, the On-
Screen Display will appear fbr 5 seconds, then dis-
appem:
2 :':' _'t I-, _,',_* spe_:id 1"
I
Press tile SPEED butten t() select
die desired tape speed (SP/SLP).
sp
,,# 3,::¢ <!00 i' 9 %i0
Press the RECORD button.
9P
d Stop _'eco_'d _9
Press file STOP button when recording is completed.
TMs luncfion euaNes you to set a recording bngdl
simply by pressing the REC/OTR buton on the
TV/VCR.
M_uke sure ...
® TV/VCR power must be turned ou,
* [usert a cassette tape with its erase prevention tab
in place, (If necessary, rewind or fast Ibrward tile
tape to the point at Wllich you want tu begin
NOTES:
* TMs function CANNOT be done from tile remete
control.
®Recording starts immedimely when tile REC/OTR
®When the REC/OTR button is pressed 18 times, the
TV/VCR returns t()file Nom_al Recording mode.
- 20 - EN
IK09
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28
  • Page 29 29
  • Page 30 30
  • Page 31 31
  • Page 32 32

Sylvania SRC2319 Owner's manual

Category
CRT TVs
Type
Owner's manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI