Samsung SCC-C7433 User manual

User’s Guide

SCC-C7433(P)/C7435(P)

SmartDome Camera (Outdoor type)

ENG GER FRE SPA ITA TUR

SCC-C7435-EU.indb 1 2008-09-12 오전 10:36:56

1

2

This symbol indicates that dangerous

voltage consisting a risk of electric

shock is present within this unit.

This symbol indicates that there are

important operating and maintenance

instructions in the literature

accompanying this unit.

WARNING

•

To reduce the risk of re or electric shock, do

not expose this appliance to rain or moisture.

WARNING

1.

Be sure to use only the standard adapter

that is specied in the specication sheet.

Using any other adapter could cause re,

electrical shock, or damage to the product.

2.

Incorrectly connecting the power supply or

replacing battery may cause explosion, re,

electric shock, or damage to the product.

3.

Do not connect multiple cameras to a single

adapter. Exceeding the capacity may cause

abnormal heat generation or re.

4. Securely plug the power cord into the

power receptacle. Insecure connection

may cause re.

5. When installing the camera, fasten it

securely and rmly. A falling camera may

cause personal injury.

6.

Do not place conductive objects (e.g.

screwdrivers, coins, metal things, etc.) or

containers lled with water on top of the

camera. Doing so may cause personal injury

due to re, electric shock, or falling objects.

7. Do not install the unit in humid, dusty, or

sooty locations. Doing so may cause re

or electric shock.

8. If any unusual smells or smoke come

from the unit, stop using the product. In

such case, immediately disconnect the

power source and contact the service

centre. Continued use

in such a condition may cause re or

electric shock.

Safety Precautions

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK)

NO USER-SERVICEABLE PARTS INSIDE

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL

CAUTION

RISK OF ELECTRIC SHOCK.

DO NOT OPEN

SCC-C7435-EU.indb 1 2008-09-12 오전 10:36:56

1

ENG

2

9. If this product fails to operate normally,

contact the nearest service centre. Never

disassemble or modify this product

in any way. (SAMSUNG is not liable

for problems caused by unauthorized

modications or attempted repair.)

10. When cleaning, do not spray water

directly onto parts of the product. Doing

so may cause re or electric shock.

CAUTION

1. Do not drop objects on the product or

apply strong shock to it. Keep away from

a location subject to excessive vibration

or magnetic interference.

2. Do not install in a location subject to

high temperature (over 60°C), low

temperature (below -45°C), or high

humidity. Doing so may cause re or

electric shock.

3. If you want to relocate the already

installed product, be sure to turn off the

power and then move or reinstall it.

4. Remove the power plug from the outlet

when then there is a lightning.

Neglecting to do so may cause re or

damage to the product.

5. Keep out of direct sunlight and heat

radiation sources. It may cause re.

6. Install it in a place with good ventilation.

7. Avoid aiming the camera directly towards

extremely bright objects such as sun,

as this may damage the CCD image

sensor.

8. Apparatus shall not be exposed to

dripping or splashing and no objects

lled with liquids, such as vases, shall be

placed on the apparatus.

9.

The Mains plug is used as a disconnect device

and shall stay readily operable at any time.

SCC-C7435-EU.indb 2 2008-09-12 오전 10:36:56

3

4

Important Safety Instructions

1. Read these instructions.

2. Keep these instructions.

3. Heed all warnings.

4. Follow all instructions.

5. Do not use this apparatus near water.

6. Clean only with dry cloth.

7. Do not block any ventilation openings.

Install in accordance with the

manufacturer’s instructions.

8. Do not install near any heat sources

such as radiators, heat registers, or

other apparatus (including ampliers)

that produce heat.

9. Do not defeat the safety purpose of

the polarized or grounding-type plug.

A polarized plug has two blades with

one wider than the other. A grounding

type plug has two blades and a third

grounding prong. The wide blade or the

third prong is provided for your safety.

If the provided plug does not t into

your outlet, consult an electrician for

replacement of the obsolete outlet.

10. Protect the power cord from being

walked on or pinched particularly at

plugs, convenience receptacles, and the

point where they exit from the apparatus.

11. Only use attachments/accessories

specied by the manufacturer.

12. Use only with cart, stand, tripod, bracket,

or table specied by the manufacturer, or

sold with the apparatus.

13. Unplug this apparatus. When a cart is

used, use caution when moving the

cart/apparatus combination to avoid

injury from tip-over.

14. Refer all servicing to qualied service

personnel. Servicing is required when

the apparatus has been damaged in any

way, such as power-supply cord or plug

is damaged, liquid has been spilled or

objects have fallen into the apparatus,

the apparatus has been exposed to rain

or moisture, does not operate normally,

or been dropped.

SCC-C7435-EU.indb 3 2008-09-12 오전 10:36:56

3

ENG

4

Overview ...........................................................................................

7

About this guide ............................................................................7

Product overview ...........................................................................7

Main features .................................................................................7

Components ...................................................................................7

CHECKING COMPONENTS IN THE PACKAGE .......................7

NAMES OF EACH PART ...........................................................8

Installation .......................................................................................

9

Before installation .........................................................................9

THINGS TO KEEP IN MIND DURING INSTALLATION AND USE

.......9

Initial setting ................................................................................10

CAMERA ADDRESS SETUP ...................................................10

SETTING COMMUNICATION PROTOCOL .............................10

BAUD RATE SETTING ............................................................ 11

SETTING RS-422A/RS-485 TERMINATION ...........................12

Preparing the cable to connect to the SMARTDOME ..............14

Note: Connector arrangement of the camera adaptor board

.......16

Cable connection .........................................................................17

Separately sold products for installation ..................................20

Installation precautions ..............................................................23

Installation ....................................................................................23

Camera Setup ................................................................................

30

Camera set ...................................................................................34

CAMERA ID .............................................................................34

V-SYNC ....................................................................................34

DAY/NIGHT ..............................................................................35

MOTION DET ...........................................................................38

ZOOM SPEED .........................................................................41

Contents

SCC-C7435-EU.indb 4 2008-09-12 오전 10:36:56

5

6

DIGITAL ZOOM ........................................................................41

DISPLAY ZOOM .......................................................................42

DISPLAY P/T ............................................................................43

EXIT .........................................................................................43

Video set ......................................................................................

44

IRIS ..........................................................................................44

ALC ..........................................................................................44

SHUTTER ................................................................................47

AGC..........................................................................................48

MOTION ...................................................................................49

WHITE BAL ..............................................................................50

FOCUS MODE .........................................................................51

SPECIAL ..................................................................................52

EXIT .........................................................................................54

Preset ...........................................................................................55

Zone set ........................................................................................57

PRIVACY ZONE .......................................................................57

ZONE DIR SET ........................................................................58

ZONE AREA SET .....................................................................59

Auto set ........................................................................................62

AUTO PAN ...............................................................................62

PATTERN .................................................................................64

SCAN .......................................................................................65

AUTO PLAY..............................................................................66

Alarm set ......................................................................................67

ALARM PRIORITY SET ...........................................................68

ALARM IN SET ........................................................................68

ALARM OUT SET ....................................................................68

SCC-C7435-EU.indb 5 2008-09-12 오전 10:36:56

5

ENG

6

AUTO SET ...............................................................................68

AUX OUT CONTROL ...............................................................68

Other set ......................................................................................

69

PROPORTIONAL P/T ..............................................................69

TURBO P/T ..............................................................................69

AUTO CAL ...............................................................................69

D-FLIP ......................................................................................70

CAM RESET ............................................................................70

LANGUAGE .............................................................................70

PASSWORD .............................................................................71

RS-485 .....................................................................................72

Clock set ......................................................................................72

System info ..................................................................................73

Shortcut keys ...............................................................................74

Product Specications ...............................................................

77

SCC-C7435-EU.indb 6 2008-09-12 오전 10:36:56

7

8

Overview

❚

About this guide

This user guide includes basic instructions for

the product. It is recommended that all users

read this guide before use.

This guide is divided as follows:



“Overview” introduces the user guide and product

related information.



“Installation” explains how to set and install the

product.



“Camera Setup” presents the structure of the

Setup menu for the SCC-C7433(P)/C7435(P)

including a detailed explanation of the functions

performed in each submenu.



“Product Speci cations” provides the

specications of the product.

❚

Product overview

This camera is a zoom lens built in smart

dome camera which provides you with the

best monitoring function in connection with

CCTV at banks or companies. This camera is

a high quality surveillance camera using x32

zoom lens and digital zoom IC, it can catch

clear images up to 510 times.

This camera uses an Alarm function for alert

situations and moving camera in the direction

you want, ZOOM-IN and ZOOM-OUT

functions can be remote controlled.

Note

SCC-C7433(P) does not support for WDR function.

❚

Main features



Power: AC24V, 3A



Special functions



WDR to cover the full screen irregardless of its

brightness



DAY/NIGHT to improve the sensitivity by

automatic conversion into the black and white

mode at night or in the environment with low

illumination



White Balance to control the brightness to the

illumination



Backlight Compensation under spotlight or

utmost bright illumination



Auto Focus to automatically adjust the focus

to the subject movement



Privacy zone to hide a specic area for

personal privacy



PAN/TILT for precise control at high speed

❚

Components

CHECKING COMPONENTS IN THE PACKAGE

Please check your camera and accessories

are included in the package. Those

components are as shown below:

SCC-C7433(P)/C7435(P) Holder Housing

User’s Guide Screws

Rod Coupling Cover Rear

Cover Front

SCC-C7435-EU.indb 7 2008-09-12 오전 10:36:57

7

ENG

8

NAMES OF EACH PART

Your camera has the following components:

1. Cover Front

2. Cover Rear

3. Camera Body

4. Cover-dome

5. Alarm Output

: N/O, COM, N/C, AO-2, AO-1, GND

6. Alarm Input (1~8)

: AI-8, AI-7, AI-6, AI-5,GND, AI-4, AI-3, AI-2, AI-1, GND

7. RS-485

: TXD+, TXD-, RXD+, RXD-

8. Power Input

: 24V, EARTH, 24V

9. Video Output

SCC-C7435-EU.indb 8 2008-09-12 오전 10:36:57

9

10

❚

Before installation

THINGS TO KEEP IN MIND DURING INSTALLATION AND USE

• Do not disassemble the camera on your own.

• Always be careful when handling the camera. Do not strike the camera by your sts or shake

it. Please be careful not to be careless when storing and operating it.

• Do not place or operate the camera in any wet environment such as rain or wet surfaces.

•

Do not clean the camera with rough sandpaper. Please always use a dry cloth when cleaning it.

•

Put the camera in a cool area free from direct sunlight. Otherwise, the camera may be damaged.

•

Power adaptor: 24V AC, 3.0A

•

If the camera is installed or rebooted after a power failure under 0 ºC temperature condition, frost

may appear on the DOME cover. Also, PTZ initial error and bad image quality may be displayed

under -10 ºC.

•

After the problems, the recovery will be performed as following:

(Conditions: No wind and under -45 ºC temperature which is guaranteed the normal operation)

1 It is possible to defrost the DOME cover within 3 hours after the power on.

2 For PTZ initial error, reboot will be executed every 10 minutes and the camera will work normally

within 3 hours after the power on.

※

If PTZ error occurs after the initial boot, the message shown below will be displayed.

"WARMING UP NOW...", "PLEASE WAIT 10 MINUTES."

3 For bad image quality, the camera will work normally within 3 hours after the power on.

❚

Initial setting

Setting up the Address of Smartdome

For the Address Setup of Smartdome, use “SW902”, “SW903”, and “SW904”.

You can set the address from 0 to 255. Set up the address digit for 100 with “SW902”, for 10

with “SW903”, for 1 with “SW904”.

For example, if the camera address is “1”, you can setup as follows.

Installation

SW902 SW903 SW904

SCC-C7435-EU.indb 9 2008-09-12 오전 10:36:58

9

ENG

10

SETTING COMMUNICATION PROTOCOL

Use number 1~4 PIN of SW901 to set communication Protocol.

A : SAMSUNG HALF

B : SAMSUNG FULL

Comp

PIN1 PIN2 PIN3 PIN4

A OFF

OFF OFF OFF

B ON

OFF OFF OFF

C OFF

ON OFF OFF

D ON

ON OFF OFF

E OFF

OFF ON OFF

F ON

OFF ON OFF

G OFF

ON ON OFF

H ON

ON ON OFF

I OFF

OFF OFF ON

J ON

OFF OFF ON

K OFF

ON OFF ON

L ON

ON OFF ON

M OFF

OFF ON ON

N ON

OFF ON ON

O OFF

ON ON ON

P ON

ON ON ON

1 2 3 4 5 6 7

8

ON

1 2

ON

(x1)

SW903

(x100)

SW901

TERMINATION

SW905

SW904

SW902

(x10)

SEE

INSTRUCTION

MANUAL

0

9

8

7

6

5

4

3

2

1

0

9

8

7

6

5

4

3

2

1

0

9

8

7

6

5

4

3

2

1

SCC-C7435-EU.indb 10 2008-09-12 오전 10:36:58

11

12

BAUD RATE SETTING

Use PIN 5 and 6 of SW901.

The factory default setting is set to 9600BPS.

BAUD RATE PIN 5

PIN 6

4800 BPS ON

ON

9600 BPS OFF

ON

19200 BPS ON

OFF

38400 BPS OFF

OFF

SCC-C7435-EU.indb 11 2008-09-12 오전 10:36:58

11

ENG

12

SETTING RS-422A/RS-485 TERMINATION

As it is shown in the structure map, when Controller and RS-422A/RS-485 is connected,

it should be terminated according to the Cable feature of impedance on the each end of the

transmitting line to transfer the signals in long distance by controlling the reection of the signals

to the lowest.

Note

Termination: using numbers 1 and 2 PIN, turn to ON and it will be terminated.

<RS-485 Half Duplex Organization>

Controller

Division n < 32

Termination

SW1-ON

CAM n

CAM n-1

CAM 2CAM 1

TX+(DATA+)

TX-(DATA-)

RX- RX+RX+ RX- RX+ RX- RX+ RX-

SCC-C7435-EU.indb 12 2008-09-12 오전 10:36:58

13

14

Note

A communication error may occur if you connect multiple cameras that are assigned the same address

in the network.

Controller

CAM 1

<RS-422A/RS-485 Full Duplex Organization>

CAM 2

CAM n-1

CAM n

Division

n < 32

Division

SW1-ON

SW2-ON

SCC-C7435-EU.indb 13 2008-09-12 오전 10:36:58

13

ENG

14

Preparing the cable to connect to the SMARTDOME

See the wiring diagram of the Holder Housing and prepare cables for the SMARTDOME.

(Power adaptor: 24V AC, 3.0A)

SCC-C7435-EU.indb 14 2008-09-12 오전 10:36:58

Page is loading ...

15

ENG

16

❚

Note: Connector arrangement of the camera adaptor board

1

3

4

5

14

13

12

11

9

8

7

6

5

4

3

2

1

4

3

2

1

6

SCC-C7435(P) Adapter Board

SCC-C7435-EU.indb 16 2008-09-12 오전 10:36:59

17

18

❚

Cable connection

1. First, connect one end of the BNC video cable connector to the Video Output Terminal

(VIDEO OUT).

2.

Then, connect the other end of the connector to the Video Input Terminal of the monitor.

Video terminal on the

rear of monitor

BNC Cable

SCC-C7435-EU.indb 17 2008-09-12 오전 10:36:59

17

ENG

18

3. Connect the Power Adapter to the Power Cable of the camera.

4.

Adjust the switch on the Power Adapter to the proper voltage. Then, connect the Power

Adapter's plug to the Power Connector. (Power adaptor: 24V AC, 3.0A)

7





)

5

3

"

&

7





7

&"

3

5)

7

Power Selection Switch

under the Power Adaptor

Power Selection Switch

under the Power Adaptor

SCC-C7435-EU.indb 18 2008-09-12 오전 10:36:59

19

20

5. Connect the Remote Control Terminal of the camera and the external Controller.

59%

59%

39%

39%

Adapter Cable

Controller

SCC-C7435-EU.indb 19 2008-09-12 오전 10:36:59

19

ENG

20

❚

Separately sold products for installation

Depending on the installation site, it may be convenient to use one of the following products.

1. WALL MOUNT ADAPTOR (SADT-103WM)

This adaptor is used for installing the SMARTDOME(SCC-C7433(P)/C7435(P)) camera on

an outdoor wall.

SCC-C7435-EU.indb 20 2008-09-12 오전 10:37:00

Page is loading ...

Samsung SCC-C7433 User manual

Samsung SCC-C7433 User manual

in other languages

Related papers

Other documents