Philips DVP5980K/75 Quick start guide

Category
DVD players
Type
Quick start guide
AUDIO OUT
DIGITAL
OUT
TV OUT
COAXIAL
COMPONENT VIDEO OUT
HDMI OUT
VIDEO IN
(CVBS)
TV
AUDIO OUT
DIGITAL
OUT
TV OUT
COAXIAL
COMPONENT VIDEO OUT
HDMI OUT
HDMI IN
TV
AUDIO OUT
DIGITAL
OUT
TV OUT
COAXIAL
COMPONENT VIDEO OUT
HDMI OUT
TV
VIDEO IN
(CVBS)
V (Pr/Cr)
U (Pb/Cb)
Y
COMPONENT
VIDEO IN
DVP 5980K
DVD Video Player
Quick Start Guide
Types of Video Quality
Composite Video CVBS
(Good Quality)
Component Video
(Better Quality)
Cable not supplied
HDMI
(Best Quality)
Cable not supplied
1
Connect
Video
x
Audio
x
Power
Power
Basic Audio/Video Connections
OR
Composite Video CVBS
Component Video
HDMI
Audio
x
Power
OR
Video and Audio
x
Video
x
Cable not supplied
Cable not supplied
What’s in the box?
DVD Video Player
Remote Control
and 2 AAA batteries
User
Manual
Quick Start
Guide
Composite
Audio/Video Cables
1_dvp5980K_75_new_qsg_eng2.indd 11_dvp5980K_75_new_qsg_eng2.indd 1 2007-06-20 3:38:59 PM2007-06-20 3:38:59 PM
3
Enjoy
2
Set up
A
Finding the viewing channel
A Press 2 (STANDBY-ON) on this unit to turn it on.
STANDBY-ON
B Turn on the TV. Use the TVs remote control to
select the correct viewing channel.
Note To search for the correct viewing channel,
press the Channel Down button on the TVs remote
control repeatedly (or AV, SELECT,
° button) until
you see the Video In channel.
B
Select the display language on the
screen
A Press SETUP.
The { General Setup Page } appears.
Disc Lock
OSD Language
ENGLISH
Sleep
Lip Sync
DivX(r) VOD Code
General Setup Page
B Press T to select { OSD Language } and press X.
C Use ST keys to select a language option in the
menu and press OK to confirm.
D Press SETUP to exit.
Note The language set here is only for the menus
that are shown on the TV while operating this unit, not
for the DVD disc menu.
There are various setup options (Audio Setup, Video
Setup, Preference Setup) available on this unit. Refer to
the user manual for more information.
A
Start disc playback
A Playback may start automatically when a disc has
been loaded in the disc tray.
Note If a disc menu appears on the TV, use
STW X keys to navigate in the DVD menu.
B Press PLAY/PAUSE
u
to start playback.
C To stop playback, press
STOP Ç.
Troubleshooting
For more troubleshooting
tips, see the user manual.
No power
Check if the AC power cord is properly connected.
Press the STANDBY-ON on the top panel of this
unit to turn on the power.
No picture
Check connection to TV and ensure the plugs are
rmly in place.
No sound or distorted sound
Check audio connections and make sure that the
connected audio device is turned on.
When both coaxial and HDMI connection are made,
check if {HDMI Audio Setup} is set to OFF to ensure
sound from AV receiver when {Digital Output - ALL}
is selected.
For HDMI connection, check if your {HDMI Audio
Setup} is set to ON. When it is set to ON, {Digital
Output} and {LPCM Output} could not be selected.
Remote control does not work
Check the batteries are loaded correctly or replace
the batteries with new ones.
Reduce the distance between the remote control
and this unit.
Point the remote control directly toward the IR
sensor.
Need help?
User Manual
For more product information refer to the user manual of the DVD player.
Online
Go to www.philips.com/welcome
2007 © Koninklijke Philips N.V.
All rights reserved.
www.philips.com
SL/0725/75_01_RC2
1_dvp5980K_75_new_qsg_eng2.indd 21_dvp5980K_75_new_qsg_eng2.indd 2 2007-06-20 3:39:01 PM2007-06-20 3:39:01 PM
  • Page 1 1
  • Page 2 2

Philips DVP5980K/75 Quick start guide

Category
DVD players
Type
Quick start guide

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI