Infinite Peripherals AMP 100 User manual

Brand: Infinite Peripherals

Model: AMP 100

Category: Bar code readers

Type: User manual

AMP 100

User Manual

Standalone Android™ Payment Device

User Manual — AMP 100

Contact Information

Mobility Sales/ Technical Support Center

Innite Peripherals, Inc.

17681 Mitchell N

Irvine, CA 92614

Toll-Free: (877) 278-7860

Ofce: (949) 222-0300

Website: ipcmobile.com

Headquarters/ Main Warehouse

Innite Peripherals, Inc.

2312 Touhy Avenue

Elk Grove Village, IL 60007

Toll-Free: (800) 278-7860

Ofce: (847) 818-1260

Fax: (847) 818-1287

Compatible Devices

Legal Notice

Trademarks

Inﬁnite Peripherals, Mobilize Your Enterprise, Linea Pro, Inﬁnea, Inﬁnea Tab, and Inﬁnea Omni are trademarks of Inﬁnite Peripherals, Inc. All other trademarks are

the property of their respective owners.

The “Android™” name, Android logo, “Google Play” brand, and other

Google trademarks are property of Google LLC and not part of the

assets available through the Android Open Source Project.

Made for Android™

User Manual — AMP 100

Table of Contents

Legal Notice 2

Compatible Devices 2

Trademarks 2

Getting Started 4

Features 4

Accessories 4

Technical Speciﬁcations 5

Physical Dimensions 5

Connectivity 5

Certiﬁcations 5

Environment 5

Box Contents 6

Getting Started 6

Product Description 7

Set–up Your AMP 100 8

Modes 8

Communication Parameters 8

Software Versions 8

Charge Your AMP 100 9

Insert or Remove the SIM Card 10

Turn on the AMP 100 11

Smart Card Reader 11

Magnetic Stripe Reader (MSR) 12

Contactless Card Reader 12

Reset the AMP 100 13

Maintenance 13

Battery Replacement 13

Cleaning the AMP 100 13

Troubleshooting 14

Warranty 14

Disclaimer 15

Product Returns and Servicing 15

Symbols 15

Federal Communications Commission 16

User Manual — AMP 100

Visit our website at https://ipcmobile.com or contact your Innite Peripherals account representative for additional information about our current and

future product accessories.

Getting Started

The AMP 100 provides wireless POS functionality in a 127mm (5”) colorful display and capacitive touch screen. The sleek ergonomic design offers power and

performance with a smart card reader, Bluetooth module, Wiﬁ, 4G wireless mobile, and magnetic stripe reader-integrated PIN-entry devices (PED) that ﬁts in

your hand.

Features

Smart Card Reader

ISO7816, EMV L1 certied

Contactless Card Reader

Near-ﬁeld communication (NFC) or contactless credit card for payment

applications.

Accessories

Magnetic Stripe Reader (MSR)

Built-in magnetic stripe reader incorporates a 3-track, bi-directional

read head, requiring a single swipe to read data from all three tracks.

(Optional) Barcode Reader

High-performance 2D imager scan engine

Image sensor 640 x 480 pixels

User Manual — AMP 100

Connectivity

Certifications

Environment

Connectivity

Apple 9-pin connector

Temperature

Operation: -10°C to +40°C (14°F to +104°F)

Storage: -20°C to +50°C (-4°F to +122°F)

Relative Humidity

Operation and Storage: 5%-90%

PCI PTS 5.x, EMV L1

Contactless Card Reader

ISO/IEC 14443 Type-A/MIFARE:

- MIFARE MINI

- MIFARE CLASSIC-1K, MIFARE CLASSIC-4K

- MIFARE ULTRALIGHT, ULTRALIGHT-C

- MIFARE PLUS 2K/4K

- MIFARE DESFire

- Others

ISO/IEC 14443 Type-B

- Supports most of the cards

ISO/IEC 15693

- Supports most of the cards

JIS X 6319-4

- Compatible with FeliCa

Barcode Types Supported

1D high-speed imager supporting barcodes:

JAN/UPC/EAN incl. add on, Codabar/NW-7, Code 11, Code 39, Code 93,

Code 128, GS1-128 (EAN-128), GS1 DataBar (RSS), IATA, Industrial 2of5,

Interleaved 2of5, ISBN-ISSN-ISMN, Matrix 2of5, MSI/Plessey, S-Code,

Telepen, Tri-Optic, UK/ Plessey

2D high-speed imager supported barcodes:

Aztec Code, Aztec Runes, Chinese Sensible code, Codablock F,

Composite codes, Data Matrix (ECC200), Passport MRZ (OCR-B), Maxi

Code (mode 2~5), MicroPDF417, Micro QR Code, PDF417, QR code

Battery

Rechargeable Lithium-Polymer battery 3.7V/2200 mAH

Power Supply

5V through USB-C

5V through single charger

Buttons

On/Off button

Two buttons for the barcode scanner

Indicators

4 LEDs for battery status

Electromagnetic buzzer

Weight

210g (7.41oz)

Dimensions

146mm (l) x 84.5mm (w) x 15.4mm (h) ( in x in x in.)

Port

USB-C port

Physical Dimensions

Technical Specifications

Magnetic Card Reader

3-track bidirectional reading capabilities

User Manual — AMP 100

Box Contents

• Before using your AMP 100, remove the unit and any included accessories from the shipping cartoon and verify the contents against the packing list.

• Retain all packing materials, invoice, and bill of lading. These may be required to return the device for servicing later, or to process a claim with the

shipping carrier.

• Carefully inspect the contents inside of the packaging for any signs of damage. If there are signs of damage, do not attempt to use the unit. Notify your

account executive or contact technical support at https://ipcmobile.com/devices.

• Ensure the battery is fully charged prior to initial use.

These items are included with your unit:

AMP 100 (1)

USB-C cable (1)

Getting Started

The AMP 100 allows you to scan barcodes and capture magnetic stripe data to pass into compatible applications. Ensure the battery is fully charged before ﬁrst use.

The following helps you get the AMP 100 ready for use:

What to do Section

Assemble the AMP 100 with your device Assemble Your AMP 100

Fully charge battery before rst use Charge Your AMP 100

Software required to operate the unit with you device Develop Applications

Note:

Use of the smart card reader and other functionality requires the installation of software. Contact your Inﬁnite Peripherals account representative for available software.

User Manual — AMP 100

Product Description

1. Barcode reader

2. Reset button opening

3. Power button

4. Magnetic Card Reader

5. Left scan button

6. Charging pads/Serial Communication for docking stations

7. SIM card tray

8. Chip chard reader

9. LCD Display with touch screen

10. Contactless card

11. Right scan button

12. USB-C port

User Manual — AMP 100

Set–up Your AMP 100

Two USB communication mode are available based on which USB cable is connected:

USB-A to USB-C (USB AM 4PIN to Type C SYI-0108B) communicates to Android’s application processor to select:

• Charge this device

• Transfer les

• Transfer photos (PTP)

• Use device as MIDI

USB-C to USB-C (Type C Male to Type C Female SYI-0129) provides communication to a secure processor. Plug this cable into the USB-A to USB-C cable for:

• Application download mode to load rmware and/or application to secure processor

• System mode for key management

• Test mode

Modes

• To enter application download mode, plug the USB cable and press both Scan buttons. Once you hear one beep, release the buttons.

• To enter system mode, release the buttons after you hear two beeps.

• To enter test mode, release the buttons after you hear three beeps. When working with the secure processor USB, a special USB cable, SYI-0129 is

required.

Communication Parameters

The default USB VC serial port communication parameters:

• 115200bps

• 2-stop bits

• No parity

Software Versions

To view the ﬁrmware and/or application versions, go to the Android Settings Menu > About phone (Android version) > Pinpad information (secure processor). The

Phone status is displayed:

• Pinpad information

• Status

• Legal information

• Version

• Model

• Android version

• Android security patch level

Pin pad information:

• Status

• Serial number

• CPU serial number

• Capabilities

• Firmware name

• Firmware version

• Application name

User Manual — AMP 100

Charge Your AMP 100

The rechargeable Li-Po battery is charged by the

• USB power adapter connected to the USB port,

• Via the device attached to a docking station.

Note:

The battery cannot be removed. If you have any issues with the battery, contact your Inﬁnite Peripherals account representative.

User Manual — AMP 100

Insert or Remove the SIM Card

To enable the smart card features of your AMP 100, insert a Nano SIM card into the SIM tray.

Note:

The SIM tray supports only Nano-size cards.

1. Use a paper clip or ejection tool to open the tray on the side of the unit.

2. Slide the tray out carefully.

3. Place the SIM card into the tray, and then close the tray.

User Manual — AMP 100

Smart Card Reader

1. Position a smart card with the gold contacts facing upward.

2. Place the card into the smart card reader slot in a smooth, continuous motion until it seats rmly.

3. Hand the unit to the customer for PIN entry.

4. Remove the card after the display indicates the transaction is complete. The transaction is void if the card is removed before the transaction is complete.

Turn on the AMP 100

1. With the unit turned off, press the Power button until you hear a single beep.

2. Press the button a second time to activate the scanner for normal barcode scanner.

Note:

If the AMP 100 is idling for an extended period of time, the power turns off automatically to preserve the charge on the internal battery pack. When turned

off, the unit goes to sleep immediately.

User Manual — AMP 100

Contactless Card Reader

The contactless card reader supports a variety of payment types. Refer to Technical Speciﬁcations on page 12 for details.

1. Activiate the unit by pressing the Power button.

2. Place the RFID tag/card as close as possible over the receiver/transmitter as

indicated by the RFID label.

Note:

Depending on the type of RFID tags/cards, it may be necessary for tags/cards to

make direct contact with the surface where the RFID receiver/transmitter is located

for proper reading and writing.

Magnetic Stripe Reader (MSR)

The built-in magnetic stripe reader incorporates a 3-track, bi-directional, encryption-capable read head. A single swipe reads data from all three tracks.

Note:

The MSR functions as an unencrypted MSR until an encryption key is injected into the MSR head by a designated Inﬁnite Peripherals key injection facility. Refer

to https://ipcmobile.com/support/technical-services#key-injection for details.

1. Insert the card with the magnetic stripe face up into either end of the MSR

reader, and then swipe the card through toward the other end of the reader.

2. Give the unit to the customer for signature or PIN entry.

Note:

To ensure the magnetic stripe pass over the read head evenly, keep the edge of the

card ﬂat on the inner edge of the reader.

User Manual — AMP 100

Maintenance

Battery Replacement

Do not attempt to open the AMP 100 or replace the battery. If the battery is not charging properly or the unit is not turning on, contact your Inﬁnite Peripherals

account representative or technical support at https://ipcmobile.com/support.

Cleaning the AMP 100

• Use a clean, soft cloth slightly dampened with water and a drop of mild soap to clean the unit.

• Do not spray cleaners directly onto the display.

• For stubborn stains, use alcohol-based cleaners.

• Never use thinner, trichloroethane, or ketone-based solvents as they can deteriorate the plastic or rubber parts.

Note:

Do not clean the card readers as this may void the warranty. For card reader service, contact Inﬁnite Peripherals support.

Reset the AMP 100

You can perform a soft reset of the AMP 100 to cycle the power and allows the unit to restart.

1. To begin the reset, press the reset button on the top of the unit until you hear a series of beeps.

2. Release the button. The unit restarts.

Note:

If the AMP 100 does not restart promptly, repeat the steps.

User Manual — AMP 100

Troubleshooting

If a problem persists or is not addressed in this section, contact Inﬁnite Peripherals support at https://ipcmobile.com/support.

Problem Possible Cause

Blank display

• Ensure the battery is fully charged.

Touchscreen does not respond

• If the display is blank, contact https://ipcmobile.com/support.

• If the display does not respond but is not blank, do the following:

Magnetic card reader

• Perform a test transaction using one or more cards to ensure the issue is not a defective card.

• Ensure the card is swiped correctly.

Smart Card Reader

• Ensure the card is inserted correctly.

Warranty

Innite Peripherals does not warrant, and is not responsible for, any damage to the AMP 100 (“Product”) or the assembled device as a result of liquid or solid

particle intrusion into the Product, or damaged caused by dropping the Product with the assembled device. If a material or workmanship defect arises with

regard to any Innite Peripherals product, and a valid claim is received within the Warranty Period, Innite Peripherals (at our sole discretion) will repair the

Product using new or refurbished parts, or replace the Product with a new or refurbished Product.

For purposes of this limited warranty, “refurbished” means a product or part that has been substantially returned to its original specications. In the event of

a defect, these are your exclusive remedies.

User Manual — AMP 100

Disclaimer

NO WARRANTY. This technical documentation is provided AS-IS. Further, the documentation does not represent a commitment on the part of. Innite

Peripherals, Inc does not warrant that it is accurate, complete or error free. Any use of the technical documentation is at the risk of the user. Innite

Peripherals, Inc reserves the right to make changes in specications and other information contained in this document without prior notice, and the reader

should in all cases consult Innite Peripherals, Inc to determine whether any such changes have been made. Innite Peripherals, Inc shall not be liable for

technical or editorial errors or omissions contained herein; nor for incidental or consequential damages resulting from the furnishing, performance, or use

of this material. Innite Peripherals, Inc does not assume any product liability arising out of or in connection with the application or use of any product or

application described herein.

Product Returns and Servicing

Use the link in step 1 to create an account and gain access to our Knowledge Base and online support services. Through our online support center, you’ll be

able to download les, open a Support Ticket, manage your RMAs, view your account Prole and subscribe to Alerts.

To request a RMA

1. Create a user account in the RMA Support Portal at http://ipcmobile.com/support/rma/

2. Login to your user account, and then click Create RMA Request.

3. Read the instructions provided and complete the online request form.

4. Note the assigned RMA number and write it clearly on your shipping carton.

5. Ship your equipment back to us using the address provided.

Symbols

Symbol Description

Refer to the instructions before using this product

Manufacturer

Manufacture Date

Caution

Serial Number

P/N

Part Number

Waste Electrical and Electric Equipment

Complies with part 15 of the FCC rules

User Manual — AMP 100

Federal Communications Commission

Federal Communications Commission (FCC) Statement

15.21

You are cautioned that changes or modiﬁcations not expressly approved by the part responsible for compliance could void the user’s authority to operate the

equipment.

15.105(b)

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Operation is subject to the following two conditions:

This device may not cause interference and

This device must accept any interference, including interference that may cause undesired operation of the device.