Lighten up. Go hands-free.
Compact comfort
Jabra introduces the BT135 – one of the lightest and most compact
Bluetooth mobile headsets in its category. The combination of
design and a really close fit featuring an adjustable earhook means
that after you’ve put it on, you can really forget you’re wearing it –
and just enjoy the pleasure and convenience of hands-free mobile
communication.
Back to the future
Its design is refreshing – we call it retro–futuristic. It comes with
three interchangeable snap-on strips in Afterdark Black, Ski Patrol
Red and Moss Stone Green – so you can change your look to match
your outfit! The headset features a backlit multifunction button that
indicates the status of your Bluetooth connection, battery and
charging.
Too good to be true
Pairing to your Bluetooth phone is a matter of seconds, and when
you’re up and running, it’s all so easy. Answer incoming calls with a
tap on your headset and enjoy automatic transfer to your headset
when you make a call yourself. You can also control advanced mobile
features such as voice dialling, call rejection and last-number redial,
without even touching your mobile phone!*
Revolutionize your mobile lifestyle. Release your Jabra.
4
Snap-on strip
Choose between 3
colour options
6
Charging socket
Easy charging with
AC power supply
provided
5
Light indicator
( LED)/Multifunction
button
Shows status on
Bluetooth, battery
and charging
Quick start guide
Pairing the Jabra BT135 to a Bluetooth mobile phone
1. Charge your Jabra BT135 until the solid blue LED turns o
(approximately 2 hours)
2. Make sure the Jabra BT135 is switched o
3. To put the Jabra BT135 in pairing mode, press and hold the multi-
function button until the LED stops ashing and turns solid blue
4. Set your mobile phone to “discover” the Jabra BT135 (see your phone
user guide)
5. Press Yes or OK when asked if you want to pair the phone with the
Jabra BT135
6. Enter passkey or PIN = 0000 (4 zeros), then press Yes or OK
7. Your phone will conrm when pairing is complete and your headset
will ash
Making a call
When you make a call from your mobile phone, the call will automati-
cally transfer to your headset (subject to phone settings).
Answering and ending a call
Tap the multifunction button on your headset to answer a call. To end
your call, just tap the multifunction button again.
Changing your style
Snap o the current strip and snap on a new one!
1
Adjustable
contoured earhook
Wear over either
ear for maximum
comfort
2
Volume up
Turn up the volume
without accessing
your mobile phone
* Phone dependent.
7
Receiver
Hear your conversa-
tion partner clearly
3
Volume down
Turn down the
volume without ac-
cessing your mobile
phone
1
3
2
6
54
7
5
5