Insignia NS-MB10400-C Quick Setup Manual

Insignia
Brand
Insignia
Model
NS-MB10400-C
Category
Rechargeable batteries
Type
Quick Setup Manual

This manual is also suitable for

PACKAGE CONTENTS
• Mobile battery pack
• Micro USB Charging/Sync cable
• Quick Setup Guide
SAFETY INFORMATION/CAUTION
• Do not expose your mobile battery pack to heat, fire, or water.
• Do not modify, disassemble, open, drop, crush, puncture, or
shred the internal battery.
• This is not a toy. Young children should be supervised to
make sure that they do not play with the mobile battery.
• Do not charge electronic devices while the battery pack is
recharging.
• Recharge the mobile battery before use if it has not been
used for more than 90 days.
• Risk of res and burns. Do not open, crush, heat above
140°F (60°C), or incinerate. Follow the manufacturer’s
instructions.
• Operation environment temperature: 32~104°F (0~40°C).
This product is safe for regular use under normal conditions.
As with any device using electrical power, some situations
may be unsafe and injuries or damages could result. To
minimize or avoid unsafe conditions, read and follow the
instructions before using.
FEATURES
CHARGING YOUR MOBILE BATTERY
Note: Fully charge your mobile battery before using it for the rst
time.
1 Plug the small end of the included USB cable into the
battery pack’s micro USB port (input).
Before using your new product, please read these instructions to prevent any damage.
Quick Setup Guide
|
NS-MB10400 / NS-MB15600 / NS-MB20800 /NS-MB10400-C / NS-MB15600-C / NS-MB20800-C
Mobile Battery Pack
2 Plug the large end of the USB cable (included) into a
standard USB port on your computer, vehicle
charger, or wall charger (not included).
The LEDs light indicating the battery level, and the
battery pack begins charging.
Note: The battery pack is fully charged when all four LEDs light.
CHARGING YOUR ELECTRONIC DEVICE
1 Plug the large end of the USB cable into one of the
battery pack’s USB output ports.
2 Plug the small end of the USB cable into your device.
The battery pack automatically begins charging
your device. Recharge the battery pack when the
LED starts blinking.
Notes:
• If your device requires a dierent connector than the one
provided, use the cable that came with your device.
• If you connect more than one USB device, 4.2A power is
shared between the ports. If your device does not charge
fast enough, disconnect the other USB device(s).
NS-MB10400
NS-MB15600
NS-MB20800
Battery indicator button
LEDs
Input
Output 4.2A total
OR
Input
Output 4.2A total
Input
Output 4.2A total
Micro USB
input
USB output
OR
V3 ENGLISH 15-0593
CHECKING YOUR BATTERY LEVEL
Press the battery indicator button to check your your
battery pack’s battery level:
4 LEDs = 75-100% power
3 LEDs = 50-75% power
2 LEDs = 25-50% power
1 LED = 5-25% power
Blinking LED = < 5% power
Note: If none of the LEDs light, the battery needs to be recharged.
SPECIFICATIONS
LEGAL NOTICES
FCC Statement:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment o and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit dierent
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) this device may not
cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause
undesired operation.
FCC Caution
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
ICES Statement
CAN ICES-3 (B)/NMB-3 (B)
ONE-YEAR LIMITED WARRANTY
Visit www.insigniaproducts.com for details.
CONTACT INSIGNIA:
For customer service, call 1-877-467-4289 (U.S. and
Canada) or 01-800-926-3000 (Mexico)
www.insigniaproducts.com
INSIGNIA is a trademark of Best Buy and its affiliated companies.
Distributed by Best Buy Purchasing, LLC
©2015 Best Buy. All rights reserved.
Made in China
Model
Input
Output
Capacity
NS-MB10400, NS-MB10400-C
5V, 2A
5V, 4.2A (Max)
37.44 Wh
Model
Input
Output
Capacity
NS-MB15600, NS-MB15600-C
5V, 2A
5V, 4.2A (Max)
56.16 Wh
Model
Input
Output
Capacity
NS-MB20800, NS-MB20800-C
5V, 2A
5V, 4.2A (Max)
74.88 Wh
  • Page 1 1
  • Page 2 2

Insignia NS-MB10400-C Quick Setup Manual

Insignia
Brand
Insignia
Model
NS-MB10400-C
Category
Rechargeable batteries
Type
Quick Setup Manual
This manual is also suitable for
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents