Star Trac 8CT-LCD Owner's manual

Type
Owner's manual
CORE HEALTH AND FITNESS
Page 1 of 2
620-8387 Rev: H
Treadmill LCD + 10” Embedded Console Install Wiring
Wiring from Neck of Unit:
Corrosponding Connections on Display Electronics:
LCD CONSOLE: SET CORRECT MODEL BY PRESSING 0+2+OK AT THE SAME TIME, USE ELEVATION UP TO
SELECT “MODEL” THEN USE THE SPEED UP TO SELECT CORRECT MODEL AND PRESS OK.
10” EMBEDDED: TAP CENTER OF SCREEN SO BLUE BOX APPEARS THEN IMMEDIATELY TAP UPPER LEFT
CORNER. CODE IS “218” SELECT MAINTENANCE MODE THEN SET MODEL TO APPROPRIATE MACHINE TYPE.
CORE HEALTH AND FITNESS
Page 2 of 2
620-8387 Rev: H
BCFG LCD + 10” Embedded Console Install Wiring
Wiring from Neck of Unit:
Corrosponding Connections on Display Electronics:
LCD CONSOLE: SET CORRECT MODEL BY PRESSING 0+2+OK AT THE SAME TIME, USE RESISTANCE UP TO
SELECT “MODEL”, PUSH OK, THEN USE THE RESISTANCE UP TO SELECT CORRECT MODEL AND PRESS OK.
10” EMBEDDED: TAP CENTER OF SCREEN SO BLUE BOX APPEARS THEN IMMEDIATELY TAP UPPER LEFT
CORNER. CODE IS “218” SELECT MAINTENANCE MODE THEN SET MODEL TO APPROPRIATE MACHINE TYPE.
  • Page 1 1
  • Page 2 2

Star Trac 8CT-LCD Owner's manual

Type
Owner's manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI