2. Pittsburgh Automotive
  3. 60806

Pittsburgh Automotive 60806, Item 60806 Quick start guide

  • Hello! I am an AI chatbot trained to assist you with the Pittsburgh Automotive 60806 Quick start guide. I’ve already reviewed the document and can help you find the information you need or explain it in simple terms. Just ask your questions, and providing more details will help me assist you more effectively!
KEEP
CLOSED
CW
Diagnostic Check
1
CLOSE ALL VALVES:
Manifold Valves - turn CW.
Coupler Valves - turn CCW.
3
Attach Couplers to
A/C system,
Blue to
suction LP port,
and Red to
discharge HP port.
4
To do a dynamic check, turn on engine,
allow to warm up, then turn on A/C.
Open Coupler Valves - turn CW.
Compare Gauge readings to vehicle’s
service specications.
5
Close Coupler Valves by
turning CCW.
Shut off engine and
A/C system if dynamic
check was done.
CAREFULLY
disconnect Couplers
from A/C system;
hoses may contain
residual refrigerant.
2
2
2
KEEP
CLOSED
CW
11
CW
4
CW
4
To suction
LP port
3
To discharge
HP port
3
CCW
1
CCW
1
2
Connect Red, Blue and Yellow Hoses
to Manifold and Couplers as shown,
RED – RED and BLUE – BLUE.
WARNING
A/C service can be dangerous.
To prevent SERIOUS INJURY,
read entire manual before use.
CONNECT HOSES:
ATTACH COUPLERS:
CHECK:
AFTER:
2
To suction
LP port
3
To discharge
HP port
3
CCW
4
CCW
4
3
Attach Couplers to
A/C system,
Blue to
suction LP port
and Red to
discharge HP port.
4
Turn on recovery system / vacuum pump.
Open Coupler Valves - turn CW.
Open Manifold Valves - turn CCW.
Read amount of vacuum on Blue LP Gauge.
5
Shut off recovery system
/ vacuum pump when
vacuum reaches
manufacturer’s
recommendation.
Close Coupler Valves by
turning CCW.
Disconnect Couplers from
A/C system.
CW
4
CW
1
CW
4
CW
1
CCW
1
CCW
1
To refrigerant
recovery system
/ vacuum pump
2
Connect Red and Blue Hoses
to Manifold and Couplers as shown,
RED – RED and BLUE – BLUE.
Connect Yellow Hose to
refrigerant recovery system / vacuum pump.
2
2
WARNING
A/C service can be dangerous.
To prevent SERIOUS INJURY,
read entire manual before use.
CONNECT HOSES:
ATTACH COUPLERS:
RECOVERY / EVACUATION:
AFTER:
1
CLOSE ALL VALVES:
Manifold Valves - turn CW.
Coupler Valves - turn CCW.
Recovery / Evacuation
/