OTTO OTVLOGKT User manual

Type
User manual
Smart phone holder / light-to-mount device.
Phone holder width: 63-102mm.
Plug the cord into the smart phone.
Turn switch to camera when using camera which have 3.5mm jack.
Adaptor (not included) required for smartphones without 3.5mm
audio jack.
Note: The device is mainly for mobile phones and cameras. Not
recommend to use it with computers as there may be compatible
issues.
Press the button on both sides to adjust the angle whenever needed.
Ergonomic handgrip allows you to record smooth videos and take
steady photos.
Designed with skid proof soles which helps eliminate sliding from
surfaces.
Connect to the mount on most digital video cameras & SLRs.
Insert 1 AAA battery for the microphone. (Not included)
A Quick switch between phone and camera.
Power on: Long press for 3 seconds to power
on the LED light. Short press for 3 light
brightness levels.
Power off: Long press for 3 seconds to power off
the LED light.
Array of 49 LEDs powered by 2 AA batteries.
(Batteries not included)
FRONT BACK
OTTO
SMARTPHONE VLOG KIT
Model: OTVLOGKT
80 mm
80 mm 80 mm
2
3
4
1
1Tripod
Phone holder
LED light
3.5mm connector
Microphone
2
3
4
5
5
Smart Phone Holder light-to mount
Adjustable 90 degrees
Tabletop Tripod
screw the camera
onto the tripod
connect the light
and camera
  • Page 1 1

OTTO OTVLOGKT User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages