REXING W1 7-Inch Digital Media Receiver User manual
- Category
- Bluetooth music receivers
- Type
- User manual
W1
7" Digital Media Receiver for
Apple CarPlay and Android Auto
w/Backup Camera
User Manual
The information in this manual is subject to change without notice.
www.rexingusa.com
1
We hope you love your new products as much as we do. If you need any assistance,
or have any suggestions to help us improve, please contact us.
Our Support Team will respond to you as soon as possible.
Always a surprise in Rexing.
• https://www.facebook.com/rexingusa/
• https://www.instagram.com/rexingdashcam/
• https://www.rexingusa.com/support/registration/
Overview
Thank you for choosing REXING!
Check us out here.
Facebook Instagram Site Product Support
(877) 740-8004
9 am - 6 pm EST (Monday to Friday)
1. W1 7" Display
2. 3.5mm to 3.5mm Cable
3. Rear Camera
4. Installation Mount
5. Power Cable
6. Display Holder
7. Suction Cup Mount
8. User Manual
9. Safety Guide
2
Package Contents
1 2 3 4
5786
W1
7" Digital Media Receiver for
Apple CarPlay and Android Auto
w/Backup Camera
User Manual
The information in this manual is subject to change without notice.
www.rexingusa.com
9
安全ガイド
www.rexingusa.com
Safety Guide
3
Product Overview
USB Port
Rear Camera Port
3.5 mm AUX Port
Power Button
4
Note:
It is not necessary to connect the red wire to the reverse light. But if you
want to use the parking assist function, it’s recommended to connect to
the red cable to the reverse lights, so the screen will display the image of
the rear camera automatically when the vehicle is in reverse. If you need
more installation information, please reach out to [email protected]
for assistance.
How to Wire the Rear Camera:
Rear camera wiring options
Connected to the reversing light
A
B
Interface Overview
5
For iPhones
FM Backup
Camera
CarPlay Android
Auto
MHZ
For Android Phones/pixel
Rear Camera ViewVolume Up FM Receiver
Volume Down Reduce Brightness
Increase
Brightness
A
Auto
brightness
ON/OFF
Basic Operation
Car Media Receiver
Notes:
6
Connect with Apple CarPlay
• The CarPlay (iPhone) and Android Auto cannot be connected and used at
the same time.
•The device will save the last iPhone/Android phone used as default,
which will connect automatically next time.
• When connecting via Carplay or Android Auto, the device touch tone or
camera tone will be muted.
•Make sure the Bluetooth and Wi-Fi settings are set to "ON" on your phone.
Please connect the mobile phone to the Bluetooth device first: CAR-KIT-XXXX
After the connection is completed, it will automatically connect to the mobile WiFi.
7
How to Connect:
Make sure the Bluetooth and
Wi-Fi of your iPhone are turned
"ON". The CarPlay feature will
be automatically connected
next time when you press the
CarPlay icon.
1. Press the CarPlay icon in
the main menu to start the
connection.
2. Go to iPhone's Settings and
press "Bluetooth", make
sure it's turned "ON" before
pairing.
3. Find CAR-KIT-XXXX from
"OTHER DEVICES";
4. Select "Pair" and confirm
the pairing code;
5. Select "Allow" to sync
Contacts and Favorites
(not required);
6. Select "Use CarPlay" for
access permission; the W1
will display a CarPlay
screen after the connection
is complete.
TT_5GHz
Airplane Mode
AA
Notification
Sound & Haptics
Focus
Screen Time
General
Control Center
Display & Brightness
Home Screen
Accessibility
WLAN
Bluetooth
Cellular
Personal Hotspot
VPN
VPN
On
Not Connected
10:44
Bluetooth
Settings
CAR-
DEW
Bleutooth
GAC_BT_61D4 Not Connected
Now discoverable as.......iPhone”.
MY DEVICES
OTHER DEVICES
To pair
Watch
Apple
Bluetooth Pairing Request
“CAR-KIT-D459” would like to pair
with your iPhone. Confirm that this
code is shown on “CAR-KIT-D459”. Do
not enter this code on any accessory.
142796
Cancel Pair
10:44
Bluetooth
Settings
CAR-
DEW
Bluetooth
GAC_BT_61D4 Not Connected
Now discoverable as.......iPhone”.
MY DEVICES
OTHER DEVICES
To pair
Watch
Apple
Allow Contacts and
Favorites Sync?
Your car may request your contacts,
phone favorites, and recent phone calls
over Bluetooth. Do you wish to allow
this? CarPlay will work without syncing
Don’t Allow Allow
10:44
Bluetooth
Settings
CAR-
DEW
Bluetooth
CAR-KIT-D459 Connected
GAC_BT_61D4 Not Connected
Now discoverable as.......iPhone”.
MY DEVICES
OTHER DEVICES
To pair
Watch
Apple
Use CarPlay with
“My-Car-Play”?
CarPlay automatically connects your
iPhone to your car’s built-in display,
and can access your phone while it is
locked.
Not Now Use CarPlay
Note
1 2
3 4
10:44
Settings
8
Notes:
•Wi-Fi will be connected automatically after the Bluetooth connection is
complete.
•Bluetooth connection will be disconnected following the successful
connection of CarPlay. There is no need of clicking Bluetooth connection
again then.
• If the Bluetooth and Wi-Fi are connected, but the CarPlay is not showing
on the W1, please set your phone setting screen time content and
privacy access restriction allowed App vehicle available start. (If it
doesn’t work after setting, please shut it down and restart the phone to
remove the restriction before connecting the device again)
1. Turn off the Wi-Fi function or switch to another Wi-Fi network to disconnect;
2. The CarPlay can also be disconnected by ignoring Bluetooth device, but you may
have to go through the steps for connection again the next time you try to
connect/reconnect.
How to Disconnect:
9
1. Access phone calls, messages, navigation, music, podcasts, audio books, etc. via
your iPhone.
2. Start Siri by voice by saying “hey Siri”; or long press the navigation button in the
lower left corner of the Carplay screen to Start Siri voice commands.
3. Return to the main interface: clicking the HOME icon on the carplay screen to
return to the main interface.
Home
18:20
5G 16 min
Home
Not Playing
Apple CarPlay Features
10:44
Settings
automatically
Use Bluetooth
Turn Bluetooth on when Android Auto
is running
Screen on
Always on
Enable wireless projection
Enable wireless projection to a car screen
Google Analytics
Enable this app’s use of Google Analytics
for background reporting of app crashes
and usage statistics (App restart required)
Wireless projection
System
Privacy Policy
Explains how Google handles your
information when you use Google’s services
Safety, Data, and Legal Notices
Important information about safety and Android Auto
Version
6.7.612934-release
About
10
Connect to Android Auto
How to Connect:
10:44
+29
Keep Note Photos Youtube Gmail Clock
Android.. Calculator Calendar Camera Google maps
Chrome Drive Google plus Transate My business
Skype Photos Spotify Dropbox Pinterest
10:44
Connect devices
Pair new device
PREVIOUSLY CONNECTED DEVICES
HUAWEI Mate 30 Pro 5G
CAR-KIT-B92F
See all
?
+
Connection preferences
Bleutooth, Android Auto, NFC
Visible as “Pixel” to other devices
i
Available devices
Device name
CAR-KIT-D459
H12
CAR-KIT-B92F
?
Pixel 4
Visible as “Pixel” to other devices
i
Pair with CAR-KIT-D459?
Bluetooth pairing code
Allow access to your contacts and call
history
Cancel Pair
527700
1 2 34
Please connect the mobile phone to the Bluetooth device first: CAR-KIT-XXXX
After the connection is completed, it will automatically connect to the mobile WiFi.
Pair new device
11
How to Disconnect:
Press the Android Auto icon in the main menu;
1. Download the Android auto App in your Android phone via the Google Store.
2. Open the Android auto App and go to Settings, turn on the "wireless projection"
function;
3. Turn on the Bluetooth in phone and press the "Pairing new device";
4. Choosing "Pair" when searching CAR-KIT-**** the interface of the Android Auto
will show up the W1 Display after a successful connection.
1. Turn off the Wi-Fi or switching to other Wi-Fi network to disconnect.
2. Ignoring Bluetooth device to disconnect Android Auto. If your device disconnects,
you may have to go through the steps for connection again the next time you try to
connect/reconnect.
3. During the operation, if you shut it down by mistake and start the Bluetooth switch in
phone, ou may have to go through the steps for connection again the next time you
try to connect/reconnect.will show up the W1 Display after a successful connection.
Notes:
•For Pixel phones, the operating system needs to be above Android 8.0 to
complete this. For other phones, it should be equipped with systems
above Android 11. Please go to Google store for Android auto APP.
•Wi-Fi will be automatically connected after the connection with Bluetooth
device. Please don’t connect Wi-Fi device manually;
•If Android auto cannot be connected, please start Android auto App before
connecting the Bluetooth device.
12
1. Access phone calls, messages, news, podcasts, navigation, music, news, weather
app, etc.
2. Turn on the virtual assistant by voice; or clicking the microphone at the bottom right
ofthe image of Android auto to turn it on.
3. Returning to the main interface: clicking the icon of exit in the image of Android
auto to return to the maininterface.
Android Auto Features
G
11:46
Exit
Weather News Calendar Settings
Phone YT Music
Podcasts Messages Maps
13
Press the rear camera button to activate the rear camera.
Or if you want to use the parking assist function, it’s recommended to connect to the
red cable to the reverse lights, so the screen will display the image of the rear camera
automatically when the vehicle is in reverse.
Backup Camera
Backup View:
170
14
1.
Press the
POWER icon to turn on (GREEN) the FM Receiver function, press it
again to turn the
feature off (ORANGE).
2.
The frequency band can be
set by clicking the left and right arrow (the default
frequency band is 91.0 MHZ)
3.
Adjusting the
FM frequency band of vehicle
radio to the same one as the
device
FM Receiver. Adjusted according to actual situation, please use the frequency
without a radio station to avoid interference.
4.
The CarPlay or Android Auto function will
be
connected and the output voice
will
be played on the vehicle radio.
FM Receiver
How to Connect:
FM Backup
Camera
CarPlay Android
Auto
MHZ
A
15
Specification
Model No.
Product Rexing 7" Digital Media Receiver for Apple
CarPlay and Android Auto w/ Backup Camera
Cortex-A53 dual-core 1.2G
DDR3 1G
256M
YES
5V
-13 °F to 149°F
-31°F to 185 °F
7"
11.5 ft
Apple CarPlay, Android Auto
CPU
DDR
FLASH
Touchscreen
Working Voltage
Working Temperature
Storage Temperature
Screen Size
Power Cable Length
Media Support
W1
Support
AUX Output
16
Warranty & Support
The Rexing W1 comes with a full 12-month warranty. If you register your product on
our official site https://www.rexingusa.com/support/registration, you can extend the
warranty to 18 months.
Warranty
If you have any questions regarding your product, please do not hesitate to contact
us at [email protected], or call us at (877) 740-8004. Queries are typically
answered within 12-24 hours.
Support
Rexing is firmly committed to always improving our products, services, and user
experience. If you have any thoughts on how we can do even better, we welcome
your constructive feedback and suggestions.
Your opinion matters
Connect with us today at [email protected]
Thank you for choosing Rexing!
FCCID: 2AW5W-W1
This equipment has been tested and found to comply with the limits for a Class
B digital device,Pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly approved by
manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1)This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause
undesired operation.
This equipment should be installed and operated with minimum distance 20cm
between the radiator & your body.
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
REXING W1 7-Inch Digital Media Receiver User manual
- Category
- Bluetooth music receivers
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Toyota NV17W User manual
-
CarPlay AA & CP Wireless Adapter User manual
-
AutoSky WCPAA-2 User manual
-
ottocast AA and CP Wireless Adapter User manual
-
Top High Technology THT0202 User manual
-
-
KREMER sino kSmart Auto User manual
-
TOGUARD RC06 User manual
-
Hyundai GD-03 User manual
-
Jensen CAR68 User manual
