River of Goods 20609 User manual

Type
User manual
ASSEMBLY INSTRUCTION
CAUTION - Refer to the wattage caution label located near the lamp holder for maximum
wattage - do not exceed the maximum wattage.
WARNING - Do not attempt to replace the bulb(s) while the lamp is plugged into a wall
receptacle
CARE INSTRUCTIONS - Use only a soft cloth; do not use any chemicals or abrasive cleaners.
IMPORTANT SAFETY INSTRUCTIONS
MADE IN CHINA
E12 Type B 25W X 5 (Not included)
E12 CFL 5W X 5 (Not included)
1. Attach the mounting bracket(D)to the outlet box(H) by using two mounting
screws(E).
2. Pull out the outlet wires and housing grounding wire from the outlet box. Make
wire connections using the wire nuts (G):
--WHITE wire with WHITE-NEUTRAL
--BLACK wire with BLACK-LIVE
--Attached the fixture grounding wire to mounting bracket with green
grounding screw(F). Carefully tuck the wires back into the outlet box.
3. Secure the canopy (A) to the metal mounting bracket (D) with screws provided
(I).
4. Turn the 2 short adjustable tubes to suitable position before shade installed.
5. Attached the lamp shade(B) to the lamp holder(A), then secure it with socket
ring(C).
Important Note: Socket ring comes pre-assembled and is located on the
socket
6. Install the bulb (not included).
  • Page 1 1

River of Goods 20609 User manual

Type
User manual

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI