ADURO S530 User guide

Brand: ADURO

Model: S530

Type: User guide

ADURO S530 is a multifunctional device that combines a wireless Bluetooth speaker with a table lamp and phone holder. Enjoy great sound quality, use it as a regular table lamp with 3 brightness levels, or as a phone holder. Listen to your favorite music wirelessly or connect via AUX to play music from your MP3 player or smartphone. The built-in rechargeable battery provides up to 10 hours of playtime and can be easily charged using the included USB cable.

In the box

 Bluetooth Speaker

LED Table Lamp

 Micro USB cable

 Instruction Manual

Features

 Enjoy music wirelessly with

great sound quality.

 Multifunctional organizer

 Table lamp with LED light

 Phone holder

INSTRUCTIONS FOR USE

Charging Instructions:

1. The speaker comes with a built-in rechargeable battery.

2. Before using it for the first time we recommend

you charge the battery fully. The device can also

be used whilst powered & is charging.

3. Connect the USB charger cable to computer USB port or

a USB wall charger (not included). Connect the other

side to the USB charging slot of the Speaker, the battery

charging LED indicator will illuminate red.

4. When the battery is fully charged, the LED indicator will

switch off.

5. When the battery is running low, you will hear a tone to

indicate the battery needs charging.

SPEAKER SPECIFICATIONS

Bluetooth version JL 5.0;

Speaker power: 3W;

Battery: 1200mAh;

Speaker: 52mm,

Operating distance:10 meters(max.)

Pairing the speaker

Switch to power on / off button to on, you’ll hear a tone and

the Bluetooth mode will turn on automatically, the blue LED i

ndicator will light,select the pairing name "U-Light Groove"

from the list of available Bluetooth devices (phone/music de

vice), you will hear a tone indicating pairing successful.

Listening to Music

Once the speakers are paired with your device you can

stream music wirelessly through the speaker. Select the track

you wish to listen to and it will be streamed to your

Bluetooth speaker. Should you encounter any problems

while streaming please refer your device’s user manual for

further information.

Using AUX-in

After the speaker is turned on, connect one end of the

3.5mm AUX cable into AUX in jack, the other end of the

Cable to connect MP3 / Smartphone to play music. When

inserted the 3.5mm AUX cable to the AUX in jack, the

Bluetooth will be disconnected automatically. (AUX cable

not included)

Using the LED Function

Bluetooth Speaker LED Table Lamp can be used

independently of the speaker and be used as a regular table

lamp.

Note: Touch power button to power ON/OFF. Short touch to

change between 3 brightness levels.

Please Note: Not all mobile phones support all the functions

listed above. Please refer to your cell phone’s user’s manual

for further information.

Cleaning & Maintenance

Unplug the product from the supply if it is left unattended

and before cleaning. NEVER immerse the product into water

and use a dry cloth for cleaning

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one or more of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which

the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved

by manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference,

and (2) this device must accept any interference received, including

interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device

can be used in portable exposure condition without restriction.

ADURO S530 User guide

ADURO S530 User guide

Other documents