Crutchfield Metra 120 70-9500 Owner's manual

Metra 120 70-9500
Brand
Crutchfield
Model
Metra 120 70-9500
Category
Motorcycle Accessories
Type
Owner's manual

Crutchfield Metra 120 70-9500 is a receiver wiring adapter that allows you to connect a new aftermarket receiver to your vehicle's factory wiring harness. It features color-coded wires for easy identification and includes instructions for matching wires to the correct functions on your receiver. The adapter also includes crimp caps and a wire stripper/crimp tool for making secure connections. Additionally, it provides information on specific wire connections for certain Jaguar models to prevent triggering the factory alarm system.

Crutchfield Metra 120 70-9500 is a receiver wiring adapter that allows you to connect a new aftermarket receiver to your vehicle's factory wiring harness. It features color-coded wires for easy identification and includes instructions for matching wires to the correct functions on your receiver. The adapter also includes crimp caps and a wire stripper/crimp tool for making secure connections. Additionally, it provides information on specific wire connections for certain Jaguar models to prevent triggering the factory alarm system.

Receiver Wiring Adapter
120 70-9500
Revision 10/31/22
STEP 1 -- MATCH & CONNECT WIRES
*120709500*
IMPORTANT
Before starting, compare items on your invoice with items
received. Thoroughly check packing materials. If an item
is missing, please call Crutchfield at 1-888-955-6000.
Match wires below to the matching function of each wire on your receiver (refer to instructions supplied with receiver). The wire colors of your
new receiver may, or may not, match the wire colors of the adapter. Match adapter and receiver wires by function, disregarding color.
Individually tape off any unused wires.
Make final wiring connections following instructions on the next page.
A.
B.
C.
Copyright 2022 Crutchfield Corporation
Red - 12 Volts Switched Power
Green - Left Rear Speaker Positive
Violet - Right Rear Speaker Positive
Green/Black - Left Rear Speaker Negative
Violet/Black - Right Rear Speaker Negative
Black - Chassis Ground Yellow - 12 Volts Constant Power
Blue - Power Antenna
Orange - Illumination
Gray/Black - Right Front Speaker Negative
White/Black - Left Front Speaker Negative
White - Left Front Speaker Positive
Gray - Right Front Speaker Positive
Black - Not Used (tape off)
White/Green - Steering Wheel Control Signal
IMPORTANT - Splice these wires in the factory harness to receiver ground
or to the vehicle chassis to prevent triggering the factory alarm system:
2002-'08 Jaguar X-Type - Red wire in pin #3 of 20-pin connector
2003-'08 Jaguar S-Type - Black/Green wire in pin #3 of 20-pin connector
Receiver Wiring Adapter Connections
120 70-9500
Page 2
STEP 2 -- CONTINUED
A. Strip wires back 1/2”.
B. Twist wires together and
insert in crimp cap.
C. Squeeze middle of cap
for tight connection.
Copyright 2022 Crutchfield Corporation
STEP 3 -- APPLICATION
D. Complete crimp connections
for all necessary wires.
E. Be sure to wrap any wires from
the Wiring Adapter that are
not necessary (wires with no
match from the new receiver)
with electrical tape.
STEP 2 -- CRIMP CONNECTIONS
Tools & Parts
Required4
Wire Stripper/Crimp Tool Crimp Caps
Unused Wire (tape over bare wires)
Receiver Wiring Adapter
Generic Illustration
When ready to install the receiver, plug
the Wiring Adapter from the new receiver
or receiver assembly into the factory
radio harness(es) in the vehicle dash.
Generic Illustration
  • Page 1 1
  • Page 2 2

Crutchfield Metra 120 70-9500 Owner's manual

Metra 120 70-9500
Brand
Crutchfield
Model
Metra 120 70-9500
Category
Motorcycle Accessories
Type
Owner's manual

Crutchfield Metra 120 70-9500 is a receiver wiring adapter that allows you to connect a new aftermarket receiver to your vehicle's factory wiring harness. It features color-coded wires for easy identification and includes instructions for matching wires to the correct functions on your receiver. The adapter also includes crimp caps and a wire stripper/crimp tool for making secure connections. Additionally, it provides information on specific wire connections for certain Jaguar models to prevent triggering the factory alarm system.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents