2. Home
  3. Do-It-Yourself tools
  4. Garden tools
  5. Lawnmowers
  6. Toro
  7. 76601
76601

Toro 76601 Operating instructions

  • Hello! I've reviewed the setup instructions for the Toro TITAN MAX 76601 and 76602 Riding Mowers. This document covers everything from initial unboxing to preparing the mower for customer delivery. I can help answer your questions about setting up safety systems, checking fluid levels, or any other procedure described in this document.
  • What fluid should be used for hydraulic system?
    What is the recommended tire pressure?
    What should be checked before delivering the machine?
    What should be shown to the customer during delivery?
FormNo.3449-600RevA
60inTITAN®MAXRidingMower
ModelNo.76601—SerialNo.400000000andUp
ModelNo.76602—SerialNo.400000000andUp
SetupInstructions
Setup
LooseParts
Usethechartbelowtoverifythatallpartshavebeenshipped.
ProcedureDescriptionQty.Use
1Nopartsrequired–Removethemachinefromthecrate.
2Nopartsrequired–Addfueltothemachine.
3Nopartsrequired–Checktheengine-oillevel.
4Nopartsrequired–Checkthehydraulic-uidlevel.
5Nopartsrequired–Checkthetirepressure.
6Nopartsrequired–Chargethebattery.
7Nopartsrequired–Raisetherollover-protectionsystem
(ROPS).
8Nopartsrequired–Checkthegrassdeector.
9Nopartsrequired–Checkthemoweradjustment.
10Nopartsrequired–Checkthemachinebeforedeliveryto
thecustomer(allmachines).
Operator'sManual1
Engineowner'smanual1
Operator-trainingmaterial1
Key2
11
Registrationcard1
Deliverthemachinetothecustomer(all
machines).
Note:Determinetheleftandrightsidesofthemachinefromthenormaloperatingposition.
©2021—TheToro®Company
8111LyndaleAvenueSouth
Bloomington,MN55420Registeratwww.Toro.com.
OriginalInstructions(EN)
PrintedintheUSA
AllRightsReserved*3449-600*
1
RemovingtheMachine
fromtheCrate
NoPartsRequired
Procedure
Ifremovingthemachinefromametalcrate,referto
theDealer/DistributorPortalforfurtherinformation.
2
AddingFueltotheMachine
NoPartsRequired
Procedure
Addfueltothemachinebeforestartingit.Refer
toyourOperator’sManualforthecorrectfueland
procedure.
3
CheckingtheEngine-Oil
Level
NoPartsRequired
Procedure
Beforeyoustarttheengineandusethemachine,
checktheoillevelintheenginecrankcase;refer
toCheckingtheEngine-OilLevelintheOperator's
Manual.
4
Checkingthe
Hydraulic-FluidLevel
NoPartsRequired
Procedure
Thismachineisshippedlledwithhydraulicuidin
thereservoirs.
Checktheexpansiontank;ifnecessary,addT oro®
HYPR-OIL™500hydraulicuid,asrecommendedin
theOperator'sManual,totheFULLCOLDline(Figure
1).
g037051
Figure1
1.Engine2.Expansiontank
2
5
CheckingtheTirePressure
NoPartsRequired
Procedure
Pressure:13psi(90kPa)
Note:Checkthetirepressurebeforestartingthe
machine.RefertoyourOperator’sManualforthe
correcttiretypeandprocedure.
6
ChargingtheBattery
NoPartsRequired
Procedure
Important:Donotrunthemachinewiththe
batterydisconnected;electricaldamagemay
occurtotheengine.
1.Chargethebattery;refertotheOperator's
Manualforinstructions.
2.Connectthenegativebatterycable.
Note:Ifthepositivecableisalsodisconnected,
connectthepositive(red)cabletothepositive
batteryterminalrst,thenthenegative(black)
cabletothenegativebatteryterminal.Slipthe
insulatorbootoverthepositiveterminal.
7
Raisingthe
Rollover-ProtectionSystem
(ROPS)
NoPartsRequired
Procedure
Important:Alwaysusetheseatbeltwiththeroll
barintheraisedposition.
1.Removethehairpincottersandremovethe2
pins(Figure2).
2.Raisetherollbartotheuprightposition,install
the2pins,andsecurethemwiththehairpin
cotters(Figure2).
g004955
Figure2
1.Rollbar3.Pin
2.Raisedposition4.Hairpincotter
3
8
CheckingtheGrass
Deector
NoPartsRequired
Procedure
Ifthereareplastictiesholdingthegrassdeectorup,
removethemandlowerthedeectorintoplace.
WARNING
Anuncovereddischargeopeningcouldallow
themachinetothrowobjectstowardyouor
bystanders,resultinginseriousinjuryor
death.Also,contactwiththebladecould
occur.
Neveroperatethemachinewithoutacover
plate,amulchplate,grassdeector,orbagger
installed.
9
CheckingtheMower
Adjustment
NoPartsRequired
Procedure
Adjusttheside-to-sidelevelandthefront-to-rearblade
slope.UsetherelevantproceduresintheOperator's
Manualtoverifythatthedeckislevel,andmakeany
adjustmentsasneeded.
4
10
CheckingtheMachineBeforeDeliverytotheCustomer
(AllMachines)
NoPartsRequired
Procedure
Beforedeliveringthemachinetothecustomer,ensurethatyouhaveperformedtheprocedureslistedinthe
followingtableandinitialeachwhennished.RefertotheOperator'sManualforinstructionsonperforming
theseprocedures.
InitialCheckProcedure
Checkthetirepressure.
Checkthelevelofthemowerdeck.
Checktheengine-oillevel.
Checkthehydraulic-uidlevel.
CheckthattheROPSissecure.
Checktheadjustmentoftheparkingbrake.
Ensurethatthemachinetrackscorrectly;refertotheOperator'sManualfortheadjustmentprocedure.
Checkthesafetyinterlocksystem;refertotheOperator'sManual.
EnsurethatthePTOworks.
Checkallfastenersthatyouinstalledtoensurethattheyaretight.
Whenyounishsettingupthemachine,signanddateinthespaceprovidedbelow:
Signature:Date:
5
11
DeliveringtheMachinetotheCustomer(AllMachines)
Partsneededforthisprocedure:
1Operator'sManual
1Engineowner'smanual
1Operator-trainingmaterial
2Key
1Registrationcard
Procedure
Atdelivery,llinthemodelandserialnumber,completetheitemslistedinthefollowingtable,andinitial
eachwhennished.
ModelNo.SerialNo.
DealerInitialCustomerInitialCheckProcedure
Showthecustomerwherethefollowingfeaturesarelocatedandhowtheyfunction:
•Fueltank
•Oil-llcap/Oildipstick
•Sparkplug(s)
•Engine-oillter
•Engine-oildrain
•Fuelgauge,valve,andhose
•Airlter
•Hydraulic-uidreservoir
•Hydrauliclter
•Battery
•Ignitionswitch
•Throttlelever
•Choke(ifapplicable)
•Power-takeoffswitch(PTO)
•Motion-controllevers
•Parkingbrake
•Heightofcut
•Lift-assistlever(ifapplicable)
•Adjustableseat
•Hydraulic-bypassvalves
•Rollover-ProtectionSystem(ROPS)
6
DealerInitialCustomerInitialCheckProcedure
RefertotheOperator'sManualtopointoutsafetyprocedures,operation,and
maintenanceprocedures.
Reviewthewarrantystatement.
Describethepost-saleserviceproceduresforyourstore.
Assistthecustomerinllingoutandmailingtheregistrationcardorregisteronline
atwww.T oro.com.
MakesurethatthecustomerreceivestheOperator'sManual,engineowner'smanual,
SetupInstructions,andoperatortrainingmaterial.
MakesurethecustomerknowsthatthePartsCatalogisavailableatwww.Toro.com.
Assistthecustomerinloadingthemachine.
Note:Whenyou,thedealerrepresentative,havenisheddeliveringthemachinetothecustomer,signand
dateinthespaceprovidebelowandkeepacopyofthispagefordealerrecords.Also,thedealermustremind
thecustomertouseafull-widthtrailerramptoloadthemachine.
Signature:Date:
Signature:Date:
7
/