Dell W-7200 Installation guide

Dell
Brand
Dell
Model
W-7200
Category
Wall & ceiling mounts accessories
Type
Installation guide

Dell W-7200 is a versatile networking device that offers a range of features to enhance your connectivity experience. With its wall-mountable design, it allows for flexible placement in various indoor settings. The included EMI clips provide protection against electromagnetic interference, ensuring reliable operation. Additionally, the power supply funnel prevents objects from falling into the power supply, increasing safety and preventing potential damage.

Dell W-7200 is a versatile networking device that offers a range of features to enhance your connectivity experience. With its wall-mountable design, it allows for flexible placement in various indoor settings. The included EMI clips provide protection against electromagnetic interference, ensuring reliable operation. Additionally, the power supply funnel prevents objects from falling into the power supply, increasing safety and preventing potential damage.

Dell PowerConnect W-7200 Series Wall Mount Kit
Installation Guide
0511265-01 | February 2013 1
Required Tools and Equipment
Installation of a Dell PowerConnect W-7200 Series controller on a wall requires the following items that are
included in the kit unless specified otherwise.
2x Wall Mount Brackets
1x Power Supply Funnel
8x M4 x 8mm Phillips Flat Head Screws
2x EMI Clip
Suitable Screwdrivers for both screw types (not included)
Wall Anchors (optional, not included)
Wall Mounting Screws (not included, the type of screw depends on your installation surface)
Installation Steps
To install a W-7200 Series controller on a wall:
1. Remove any installed power supplies.
2. Attach the included EMI clips by sliding it over the edge of the power supply slot (see Figure 1). Install one
clip in each slot.
Figure 1
EMI Clip Installation
3. Fasten the wall mount brackets over the mounting holes on the sides of the wired AP using the included M4x
6mm phillips head screws and a Phillips Head screwdriver, as shown in Figure 2.
NOTE: The Ethernet ports must be facing down when installing your W-7200 Series controller on a wall.
7200_014
2 Dell PowerConnect W-7200 Series Wall Mount Kit | Installation Guide
Figure 2
Attaching the Wall Mount Brackets
4. After you have chosen a mounting location, mark the locations on the wall where you intend to make
mounting holes.
5. Create the holes and insert wall anchors if your installation requires them.
6. Align the mounting bracket holes with the holes you created in the wall as shown in Figure 3.
7. Use appropriate screws to secure your W-7200 Series controller.
8. Connect the AC power cord to the rear of the unit.
Figure 3
Mounting the W-7200 Series Controller
7200_11
Dell PowerConnect W-7200 Series Wall Mount Kit | Installation Guide 3
Installing the Power Supply Funnel
Once you have mounted your W-7200 Series controller, install the power supply funnel. The funnel prevent
objects from falling into the W-7200 Series controller’s power supply and potentially causing damage.
1. Align the funnel over the power supply slots as shown in Figure 4.
2. Mark the locations on the wall where you intend to make mounting holes.
3. Create the holes and insert wall anchors if your installation requires them.
4. When you place the funnel over the W-7200 Series controller for final installation, be sure to place the power
cord through the bushing above the corresponding power supply.
5. Use appropriate screws and screwdrivers to secure your W-7200 Series controller.
Figure 4
Mounting the Funnel
7200_12
4 Dell PowerConnect W-7200 Series Wall Mount Kit | Installation Guide
Figure 5
Completed Installation
7200_13
Copyright
© 2013 Aruba Networks, Inc. Aruba Networks trademarks include , Aruba Networks
®
, Aruba Wireless Networks
®
, the
registered Aruba the Mobile Edge Company logo, and Aruba Mobility Management System
®
. Dell™, the DELL™ logo, and PowerConnect™ are
trademarks of Dell Inc.
All rights reserved. Specifications in this manual are subject to change without notice.
Originated in the USA. All other trademarks are the property of their respective owners.
Open Source Code
Certain Aruba products include Open Source software code developed by third parties, including software code subject to the GNU General
Public License (GPL), GNU Lesser General Public License (LGPL), or other Open Source Licenses. The Open Source code used can be found at
this site:
http://www.arubanetworks.com/open_source
Legal Notice
The use of Aruba Networks, Inc. switching platforms and software, by all individuals or corporations, to terminate other vendors’ VPN client
devices constitutes complete acceptance of liability by that individual or corporation for this action and indemnifies, in full, Aruba Networks, Inc.
from any and all legal actions that might be taken against it with respect to infringement of copyright on behalf of those vendors.
5 Dell PowerConnect W-7200 Series Wall Mount Kit | Installation Guide
Contacting Support
Website Supportain Website
Main Site dell.com
Support Site dell.com/support
Documentation Site dell.com/support/manuals
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5

Dell W-7200 Installation guide

Dell
Brand
Dell
Model
W-7200
Category
Wall & ceiling mounts accessories
Type
Installation guide

Dell W-7200 is a versatile networking device that offers a range of features to enhance your connectivity experience. With its wall-mountable design, it allows for flexible placement in various indoor settings. The included EMI clips provide protection against electromagnetic interference, ensuring reliable operation. Additionally, the power supply funnel prevents objects from falling into the power supply, increasing safety and preventing potential damage.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents