2. Symmons
  3. SLS-3522-STN-1.5
SLS-3522-STN-1.5

Symmons SLS-3522-STN-1.5, SLS-3522-1.0, SLS-3522-1.5, SLS-3522-BBZ-1.5, SLS-3522-MB-1.0, SLS-3522-MB-1.5, SLS-3522-STN, SLS-3522-STN-1.0 Installation guide

  • Hello! I've reviewed the installation brief for the Symmons Dia Lavatory Faucet SLS-3522-1.5. This document outlines the faucet's dimensions, installation steps, and required tools. It also includes information on replacement parts and modification options like aerator adjustments. I'm ready to answer any questions you have about this faucet and its installation.
  • What is the model number of the lavatory faucet?
    What is the aerator flow rate of the faucet?
    What is the minimum and maximum deck thickness required for the faucet?
    What tools are needed for installation?
2.5 mm
PLUMBERS
PUTTY
Model Numbers
SLS-3522-1.5 Lavatory faucet only,
(5" height)
Dimensions Dia Lavatory Faucet, SLS-3522-1.5
AA B
B
C
CJJ
D
D
F
FG
GH
HII
LL
K
K
EE
Modification Options
Append -suffix code to part numbers
when applicable
-1.0 1.0 gpm (3.8 L/min) aerator
Measurements
A 1-7/8", 48 mm
B 1-3/16", 30 mm
C
Hole Size
Min. Ø 1-1/4", 32 mm
Max. Ø 1-1/2", 38 mm
D 4-1/16", 103 mm
E Min. 2-1/2", 64 mm
F 6-1/8", 155 mm
G 5", 127 mm
H 3-5/16", 84 mm
I 26°
J
Deck Thickness Ref.
Min. 7/8", 22 mm
Max. 1-7/8", 47 mm
K 25-7/8", 658 mm
L 3/8" compression tting
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause
cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
Need Help?
Contact Symmons customer service at
P: (800) 796-6667, (781) 848-2250
Email: [email protected]
Monday - Friday 7:30 am - 6:00 pm EST
Please check Symmons website
for technical help, the latest product
information, warranty policy and a list of
Symmons distributors
www.symmons.com
Tools & Materials
Installation Brief
Dia®
Lavatory Faucet SLS-3522-1.5
Hotter (+)
Colder (–)
13
22
HOT COLD
ON
OFF
Step 2
Connect supply hoses
HOT COLD
Step 3
Flush lines and
check for leaks
SLS-3522-1.5
Step 1
Attach faucet assembly
Limit stop adjustment
Pop-up Drain
Quick Install Guide Dia Lavatory Faucet, SLS-3522-1.5
Symmons Industries, Inc. ■ 31 Brooks Drive ■ Braintree, MA 02184 ■ Phone: (800) 796-6667 ■ Fax: (800) 961-9621
Copyright © 2020 Symmons Industries, Inc. ■ symmons.com ■ [email protected] ■ ZV-3150 REV D ■ 011320
Aerator kits
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
0.5 gpm (1.9 L/min)
Cartridge w/
Limit Stop
Part Number Item
Replacement Parts
Non-aerated laminar
ow outlet kits
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
0.5 gpm (1.9 L/min)
LN-15-1.5-NA*
LN-15-1.0-NA*
RL-019*
includes aerator, retainer & washer
includes aerator, retainer & washer
Handle kit
includes handle, allen
screw & RB button plug
requires 2.5 mm Allen wrench
Mounting hardware kit
threaded studs (2)
hex nut (2)
rubber washer (1)
metal washer (1)
LN-01660* 4” deck plate
RL-066*
* Note: For decorative nish faucets append the
appropriate sufx code letters to part numbers
marked with an asterisk (*)
aerator
1.5gpm (5.7L/min)
aerator retainer
base gasket
mounting gasket
mounting plate
mounting nut
ex supply hoses
SLS-3522-1.5
length: 27-9/16"
(700 mm)
COLD: blue stripe
HOT: red stripe
3/8" compression
cap
retainer nut
cartridge
faucet body
handle
allen screw
button plug
lift rod
stopper
P-100N
pop-up drain
assembly
RL-154LR*
includes stopper
2.5 mm wrench
included
Model
SLS-3522-1.5
RL-070
RL-059-1.5*
RL-059-1.0*
RL-059-0.5*
RL-070
RL-067*
Parts Assembly Dia Lavatory Faucet, SLS-3522-1.5
/