LG 42LV5700 User guide

ENG

ENGLISH

ENG

ENGLISH

LICENSES

Supported licenses may differ by model. For more information of the licenses, visit www.lg.com.

Manufactured under license from Dolby Laboratories. “Dolby” and the double-D

symbol are trademarks of Dolby Laboratories.

HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or

registered trademarks of HDMI Licensing LLC.

ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, Inc. This

is an official DivX Certified® device that plays DivX video. Visit www.divx.com for

more information and software tools to convert your files into DivX video.

ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be regis-

tered in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain

your registration code, locate the DivX VOD section in your device setup menu. Go

to vod.divx.com for more information on how to complete your registration.

“DivX Certified® to play DivX® and DivX Plus ™ HD (H.264/MKV) video up to

1080p HD including premium content.”

“DivX®, DivX Certified® and associated logos are trademarks of DivX, Inc. and are

used under license.”

“Covered by one or more of the following U.S. patents :

7,295,673; 7,460,668; 7,515,710; 7,519,274”

LICENSES

ENG

ENGLISH

ENG

ENGLISH

TABLE OF CONTENTS

2 LICENSES

5 ASSEMBLING AND PREPAR-

ING

5 Unpacking

6

Parts and buttons

7

Setting up the TV

10

Desktop pedestal installation

11

Wall mount:horizontal installation

11

Tidying cables

14 REMOTE CONTROL

15 Magic Motion Remote Control Functions

16 - Registrating Magic Motion Remote

Control

16 - How to use Magic Motion Remote Con-

trol

16 - Precautions to Take when Using the

Magic Motion Remote Control

17 WATCHING TV

17 Connecting to an antenna

17 - Connecting an antenna

17 Turning the TV on for the first time

17 Watching TV

18 Accessing Home menu

19

- Manually setting up programme (In

digital mode)

21

- Manually setting up programme (In

analogue mode)

22

- Editing your programme list

23

- Using favourite programmes

23

- Booster(In air digital mode)

Using additional options

- Adjusting aspect ratio

23 - Changing AV modes

23 - Using the input list

25 Using the quick menu

26 ENTERTAINMENT

26 Connecting the TV to a network

26 - Connecting the wired network

27 - Connecting the wireless network

29 - When a security code is already set

32 - Network Status

33 Premium card function

35 My Media Card Function

35 - Connecting USB storage devices

37 - DLNA DMP (Digital Living Network Alli-

ance, Digital Media Player)

40 - DLNA DMR (Digital Living Network Alli-

ance, Digital Media Renderer)

41 - Browsing files

42 - Viewing videos

45 - DivX registration code

46 - Viewing photos

48 - Listening to music

50 Time Machine Card Function

50 - Precautions when using the USB De-

vice

51 - TIME MACHINE (PAUSE & REPLAY

OF LIVE TV)

55 - RECORDING

57 - SCHEDULE

59 - RECORDED TV

62 EPG (Electronic Programme Guide) Card

Function (In digital mode)

62 - Switch on/off EPG

62 - Select a programme

63 - NOW/NEXT Guide Mode

63 - 8 Day Guide Mode

63 - Date Change Mode

63 - Extended Description Box

22

Separate purchase

Careful installation advice

Kensington security system

Securing the TV to a table

12

13

12

13

ENG

ENGLISH

ENG

ENGLISH

TABLE OF CONTENTS

64 CUSTOMIZING TV SETTINGS

64 Accessing SETUP Menu

65 Customizing Settings

65 - SETUP Settings

66 - PICTURE Settings

69 - AUDIO Settings

72 - TIME Settings

73 - LOCK Settings

74 - OPTION Settings

77 - NETWORK Settings

78 - SUPPORT Settings

79 MAKING CONNECTIONS

79 Making Connections

80 External Equipment Setup

82 Connecting to a equipment wirelessly

83 SIMPLINK connection

83 - Activating and Using the SIMPLINK

menus

84 MAINTENANCE

84 Updating the TV firmware

85 Cleaning your TV

85 - Screen and frame

85 - Cabinet and stand

85 - Power cord

86 Preventing “Image burn” or “Burn-in” on

your TV screen

87 TROUBLESHOOTING

89 SPECIFICATIONS

93 APPENDIX

ENG

ENGLISH

ENG

ENGLISH

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

Separate purchase

Wireless Intelligent Media Box

Wireless LAN for Broadband

/DLNA Adaptor

(AN-WF100)

M-Rmote Dongle

(Use with the Motion Remote Control)

(Only 32/37/42/47LV5700)

Motion Remote Control,

Magic motion

Remote Control Dongle

Batteries (AA)

Model

VESA (A x B)

Standard screw

Number of screws

Wall mount bracket

72LZ9700

600 x 400

M8

4

LSW600B

32LV5700

200 x 100

M4

4

LSW100B

37LV5700

200 x 200

M6

4

LSW200B

42/47LV5700

400 x 400

M6

4

LSW400B

Optional extras can be changed or modified for quality improvement without any notification.

Contact your dealer for buying these items.

This device only works with compatible LG LED LCD TV or LCD TV.

HDMI OUT

WIRELESS

CONTROL

ASSEMBLING AND PREPARING



Do not use any pirated items to ensure the safety and product life span.



Any damages or injuries by using pirated items are not covered by the warranty.

CAUTION

ENG

ENGLISH

ENG

ENGLISH

Parts and buttons

Image shown may differ from your TV.

TV can be placed in standby mode in order to reduce the power consumption. And TV should beswitched off using

the power switch on the TV if it will not be watched for some time, as this willreduce energy consumption.

The energy consumed during use can be significantly reduced if the level of brightness of the picture is reduced,

and this will reduce the overall running cost.

NOTE

CAUTION

Do not step on the glass stand or subject it to any impact. It may break, causing possible injury from fragments of

glass, or the TV may fall.

Do not drag the TV. The floor or the product may be damaged.

( You can set the Power indic-

ator to on or off by selecting

OPTION in the Home menu

- SETUP.

Touch button

2

Description

Turns the power on or off

Changes the input source

Accesses the Home menu, or saves your input and exits the menus.

Selects the highlighted menu option or confirms an input

Adjusts the volume level

Scrolls through the saved programmes

Touch buttons

(All of the buttons are touch sensitive

and can be operated through simple

touch with your finger.)

Speakers

Remote control

intelligent sensor

(Adjusts the image quality and

brightness based on the surr-

ounding environment.)

Power indicator

Screen

1

3

2

INPUT

P

OK

HOME

H

INPUT

HOME

OK

P

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

BACK PANEL

(only 72LZ9700)

y

Image shown may differ from your TV.

ASSEMBLING AND PREPARING

Rear Connection panel

ENG

ENGLISH

ENG

ENGLISH

FRONT PANEL

( You can set the Power indicator to

on or off by selecting OPTION in

the Home menu - SETUP. )

Speakers

Remote control

intelligent sensor

(Adjusts picture according to the

surrounding conditions.

Power indicator

Screen

1

2

P

HOME

INPUT

H

OK

buttons

Touch button

2

Description

Turns the power on or off

Changes the input source

Accesses the Home menu, or saves your input

and exits the menus.

Selects the highlighted menu option or confirms

an input

Adjusts the volume level

Scrolls through the saved programmes

INPUT

HOME

OK

P

BACK PANEL

Rear Connection panel

y

Image shown may differ from your TV.

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

Setting up the TV

If you are not mounting the TV to a wall, use the

following instructions to attach the stand.

Attaching the stand

Only LZ9700

2

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Stand Body

Stand Base

5 Secure the TV and the stand with the 4 screws.

4

Assemble the parts of the Stand Rear Cover

with the TV.

Only 32/37/42/47LV5700

1

Assemble the TV as shown.

3

M5 x 35

x 4

M4 x 20

x 4

2

Assemble the parts of the Stand Body with the

Stand Base of the TV.

Stand Body

Stand Base

4 Secure the TV and the stand with the 4 screws.

3

Assembel the TV as shown.

M4 x 12

x 4

M4 x 12

x 4

1

Carefully place the TV screen sidde down on a

cushioned surface to protect the screen from

damage.

Carefully place the TV screen sidde down on a

cushioned surface to protect the screen from

damage.

Stand Rear

Cover

Image shown may differ from your TV.

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

IN1

DESKTOP PEDESTAL

INSTALLATION

1

Lift and tilt the TV into its upright position on a

table.

Do not place the TV near or on sources

of heat, as this may result in fire or other

damage.

CAUTION

2

Connect the power cord to a wall outlet.

2020

10 cm

Image shown may differ from your TV

For adequate ventilation allow a clearance of

10cm all around the TV.

SWLVEL STAND

Image shown may differ from your TV

After installing the TV,you can adjust the TV set

manually to the left or right direction by 20 degr-

ees to suit your viewing position.

WALL MOUNT:HORIZONTAL

INSTALLATION

10 cm

We recommend the use of a LG Brand wall

mounting bracket when mounting the TV to

a wall

We recommend that you purchase a wall m-

ounting bracket which supports VESA stand-

ard.

LG recommends that wall mounting be perfo-

rmed by a qualified professional installer.

NOTE

Should install wall mount on a soild wall per-

pendicular to the floor.

Should use a special wall mount,if you want

to install it to ceiling or slanted wall.

The surface that wall mount is to be mounted

on should be of sufficient strength to support

the weight of TV set ;e.g:concrete,natural ro-

ck brick and hollow block.

Installing screw type and length depends on

the wall mount used.Further information,refer

to the instructions included with the mount.

LG is not liable for any accidents or damage

to property or TV due to incorrect installation:

—Where a non-compliant VESA wall mount

is used.

—Inorrect fastening of screws to surface which

may cause TV to fall and cause personal in-

jury.

—Not following the recommended Installation

method.

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

CAREFUL INSTALLATION

ADVICE

This feature is not available for all models.

Image shown may differ from your TV.

KENSINGTON SECURITY

SYSTEM

You should purchase necessary components to fix

the TV safety and secure to the wall on the market.

Position the TV close to the wall to avoid the poss-

ibility of it falling when pushed.

The instructions shown below are a safer way to set

up the TV, by fixing it to the wall, avoiding the possi-

bility of it falling forwards if pulled.

This will prevent the TV from falling forward and ca-

using injury. This will also prevent the TV from dam-

age. Ensure that children do not climb or hang from

the TV.

1Use the eye-bolts or TV brackets/bolts to fix the

product to the wall as shown in the picture.

(If your TV has bolts in the eyebolts, loosen then

bolts.)

* Insert the eye-bolts or TV brackets/bolts and

tighten them securely in the upper holes.

2Secure the wall brackets with the bolts on the

wall. Match the height of the bracket that is

mounted on the wall.

3Use a sturdy rope to tie the product for align-

ment. It is safer to tie the rope so it becomes

horizontal between the wall and the product.

When moving the TV undo the cords first.

Use a platform or cabinet strong and large en-

ough to support the size and weight of the TV.

To use the TV safely make sure that the height

of the bracket on the wall and on the TV is the

same.

This feature is not available for all models.

Image shown may differ from your TV.

The TV is equipped with a Kensington Security Syst-

em connector on the back panel. Connect the Kensi-

ngton Security System cable as shown below.

For the detailed installation and use of the Kensington

Security System, refer to the user’s guide provided w-

ith the Kensington Security System.

For further information, contact http://www.kensington

.com, the internet homepage of the Kensington comp-

any. Kensington sells security systems for expensive

electronic equipment such as notebook PCs and LCD

projectors.

The Kensington Security System is an optional a-

ccessory.

If the TV feels cold to the touch, there may be a

small “flicker” when it is turned on.

This is normal, there is nothing wrong with TV.

Some minute dot defects may be visible on the s-

creen, appearing as tiny red, green, or blue spots.

However, they have no adverse effect on the mo-

nitor's performance.

Avoid touching the LCD screen or holding your fi-

nger(s) against it for long periods of time.

Doing so may produce some temporary distortion

effects on the screen.

CAUTION

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

Do not move the TV by holding the

cable management clip, as the cable

management clip may break, and injuries

and damage to the TV may occur.

CAUTION

Only 72LZ9700

2 Pull the cable management on the stand cover

and organize cables. Then, put it back.

1 Gather and bind the cables with the cable

holder.

Tidying cables

Only 32/37/42/47/55LV5700

1 Gather and bind the cables with the cable

holder.

Cable Holder

Securing the TV to a table

Fix the TV to a table to prevent from tilting forward,

damage, and potential injury.

Mount the TV on a table, and then insert and

tighten the supplied screw on the rear of the stand.

To prevent TV from falling over, the TV

should be securely attached to the floor/

wall per installation instructions. Tipping,

shaking, or rocking the TV may cause

injury.

WARNING

Only 32/37LV5700

Image shown may differ from your TV.

ASSEMBLING AND PREPARING

ENG

ENGLISH

ENG

ENGLISH

ENERGY SAVING

AV MODE

INPUT

TV/RAD

Alphanumeric buttons

L

IST

Q.VIEW

MARK

FAV

CHAR/NUM

DELETE

MUTE

P

PAGE

PREMIUM

HOME

Q.MENU

Navigation buttons

OK

BACK

GUIDE

EXIT

Coloured buttons

SUBTITLE

INFO

Control buttons

（

）

LIVE TV

REC

RATIO

Enters letters and numbers.

Accesses the saved programme list.

Returns to the previously viewed programme.

(POWER)

Adjusts the brightness of the screen to reduce energy consumption.

Selects an AV mode.

Selects Radio, TV and DTV programme.

Adjusts the volume level.

Accesses your favourite programme list.

Switches between Letter and Number input modes.

Deletes letters and numbers.

Mutes all sounds.

Moves to the previous or next screen.

Accesses the Premium menus.

Accesses the Home menu.

Accesses the quick menus.

(up/down/left/right)

Allows you to navigate the on-screen menus and adjust the system se-

tting to your preference

Selects menus or options and confirms your input.

Returns to the previous level.

Shows programme guide.

Clears all on-screen displays and return to TV viewing.

These buttons are used for teletext (on TELETEXT models only),

Programme edit.

Controls the Time Machine or MY MEDIA menus or the SIMPLINK

compatible devices (USB,SIMPLINK or Time Machine).

Return to the LIVE TV.

Uses to adjust Timeshift Mode.

Views the information of the currently programme and the screen.

Switches the TV on from standby or on to standby.

External in put mode rotate in regular sequence.

Move from one full set of sceen infermation to the next one.

Check and un-check programmes in the USB menu.

Recalls your preferred subtitle in digital mode.

Selects your desired Aspect Ratio af picture.

AV MODE INPUT

TV/

RAD

ENERGY

SAVING

1 2

ABC

3

DEF

4

GHI

5

JKL

6

MNO

7

PQRS

8

TUV

0

9

WXYZ

BACK

EXIT

OK

LIST

Q.VIEW

Premium

Home

Q.MENU

GUIDE

INFO

FAV

MUTE

MARK

DELETE

CHAR/NUM

P

A

G

E

RATIO

REC

LIVETV

SMART TV

Accesses the AV devices connected to the TV;

Opens the SIMPLINK menu.

REMOTE CONTROL

ENG

ENGLISH

ENG

ENGLISH

This item is not included for all models.

The descriptions in this manual are based on the but-

tons of the remote control.

Please read this manual carefully and use the TV cor-

rectly.

When the message "Magic motion remote control bat-

tery is low. Change the battery." is displayed, replace

the battery.

To replace batteries, open the battery cover, replace

batteries (1.5 V AA) matching

and ends to the

label inside the compartment, and close the battery

cover. Be sure to point the remote control to the remote

control sensor on the TV.

To remove the batteries, perform the installation actions

in reverse.

Magic Motion Remote Control Functions

Make sure to point the remote control to the remote control sensor on the TV.

Do not mix old and new batteries, as this may damage the remote control

CAUTION

(POWER)

Turns the TV on or off.

MUTE

Mutes all sounds.

Navigation buttons (up/down/

left/right)

Scrolls through menus or options.

Pointer Receiver

Blinks the light when operating.

Adjusts the volume level.

Scrolls through the saved pro-

grammes.

HOME

Accesses the Home menu.

OK

Press this button to display the

pointer when it disappears from the

screen. You can control the TV by

selecting Quick Menu on the screen.

OK

HOME

MUTE

(only 72LZ9700)

y

Image shown may differ from your TV.

REMOTE CONTROL

ENG

ENGLISH

ENG

ENGLISH

Registrating Magic Motion Re-

mote Control

The Magic Motion Remote Control operates by

pairing with your TV.

Register the Magic Motion Remote Control after

purchasing the TV.

How to register the Magic Motion Remote

Control

To register the Remote Control, press the OK button

on the Remote Control while aiming it at your TV.

How to Re-register the Magic Motion Remote

Control after Registration Failure

Reset the remote control by pressing and holding

both the

OK

and MUTE buttons for 5 seconds.

(Once the reset is complete, the light on the Point-

er RF Receiver blinks.) Then repeat the above

procedure to register the remote control.

How to use Magic Motion Re-

mote Control

1 Press

OK

button if there is no pointer on your

TV screen. The pointer will then appear on the

screen.

If the pointer has not been used for a certain

period of time, it will disappear.

2 You can move the pointer by aiming the Pointer

Receiver of the remote control at your TV then

move it left, right, up or down.

If the pointer does not work properly after click-

ing the

OK

button, leave the remote control for

10 seconds then use it again.

Precautions to Take when Using

the Magic Motion Remote Control

Use the remote control within the maximum

communication distance (10 m). Using the

remote control beyond this distance, or with

an object obstructing it, may cause a com-

munication failure.

A communication failure may occur due to

nearby devices. Electrical devices such as

a microwave oven or wireless LAN product

may cause interference, as this will use the

same bandwidth (2.4 GHz) as the Magic Mo-

tion Remote Control.

The Magic Motion Remote Control may be

damaged or may malfunction if it is dropped

or receives a heavy impact.

When playing a game using the Magic

Motion Remote Control, hold it securely by

wrapping its strap around your wrist and

adjusting the length with the adjustable ring.

Take care not to bump into nearby furniture

or other people when using the Magic Motion

Remote Control.

Manufacturer and installer cannot provide

service related to human safety as the ap-

plicable wireless device has possibility of

electric wave interference.

REMOTE CONTROL

ENG

ENGLISH

ENG

ENGLISH

WATCHING TV

Connecting to an antenna

Connect an antenna to watch TV referring to the

following.

To prevent damage do not connect to the mains

outlet until all connections are made between the

devices.

Connecting an antenna

Connect the TV to a wall antenna socket with a

RF cable (75

).

Use a signal splitter to use more than 2

TVs.

If the image quality is poor, install a signal

amplifier properly to improve the image

quality.

If the image quality is poor with an

antenna connected, aim the antenna to

the proper direction.

An antenna cable and converter are not

supplied.

NOTE

4 When the basic settings are complete,

press OK.

For those countries without confirmed DTV broa-

dcasting standards, some DTV features might n-

ot work, depending on the DTV broadcasting en-

vironment.

To display images in the best quality for your ho-

me environment, select Home Use.

S

tore Demo is suitable for the retail environment.

If you select Store Demo , the previously custo-

mized settings will switch to the default settings

of Store Demo in 5 minutes.

NOTE

Turning the TV on for the

first time

When you turn the TV on for the first time, the

Initial setting screen appears. Select a language

and customize the basic settings.

1

Connect the power cord to a power outlet.

2

In Standby mode, press POWER to turn the TV

on.

The Initial setting screen appears if you turn

the TV on for the first time.

3

Follow the on-screen instructions to customize

your TV settings according to your preferences.

You can also access Factory Reset by

accessing OPTION in the Home menu-

SETUP.

NOTE

Selects a country to display.

Countrycity



Mode Setting



Power Indicator



Auto Tuning

Scans and saves available

programmes automatically.

Selects Home Use for the

home environment.

Sets the power indicator.

(When you select Home Use

from Mode Setting)

If you do not complete the Initial setting, it will ap-

pear whenever the TV turns on.Disconnect the p-

ower cord from the power outlet when you do no-

t use the TV for a long period of time.

NOTE

Watching TV

1

In Standby mode, press POWER to turn the TV

on.

2

Press INPUT and select Antenna.

3

To turn the TV off, press POWER.

The TV switches to Standby mode.

WATCHING TV

ENG

ENGLISH

ENG

ENGLISH

Accessing Home menu

1

Press HOME to access the Home menu.

2

Press the Navigation buttons to scroll to one of the following menus and press OK.

3

Press the Navigation buttons to scroll to the setting or option you want and press OK.

4

When you are finished, press EXIT.

WATCHING TV

ENG

ENGLISH

ENG

ENGLISH

1 Press HOME to access the Home menu.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3

4

Press the Navigation buttons to scroll to

Manual Tuning and press OK.

5

Press the Navigation buttons to scroll to DTV

and press OK .

6

Scroll through the programme types, and then

add or delete programmes.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Manually setting up programme

(In digital mode)

Manual Tuning lets you manually add a pro-

gramme to your programme list.

NOTE

If the TV scans a blocked programme, you

will be prompted to enter your password to

keep the programme scanned.

serugif eht esu uoy ,gninut yllaunam nehW

that are set up at Auto Tuning for each of

necessary item.

When the change is needed, please first

perform Auto Tuning.

Please inquire of the cable service provider

about the correct values.

NOTE

If the TV scans a blocked programme, you

will be prompted to enter your password to

keep the programme scanned.

I : PAL I/II (U.K. / Ireland / Hong Kong / South

Africa)

DK : PAL D/K (East Europe / China / Africa /

CIS)

NTSC M : USA / Korea / Philippines

To store another channel, repeat steps 5 to

10.

Manually setting up programme

(In analogue mode)

Manual Tuning lets you manually tune and arrange

the stations in whatever order you desire.

1 Press HOME to access the Home menu.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3

4

Press the Navigation buttons to scroll to

Manual Tuning and press OK.

5

Press the Navigation buttons to scroll to

TV or Cable TV and press OK.

6

Scroll through the programme types, and then

add or delete programmes.

7

Press the Navigation buttons to scroll to

TV System.

8

Press the Navigation buttons to scroll to

V/UHF or Cable.

9

Press the Navigation buttons or Number but-

tons to scroll to the desired channel number.

10

Press the Navigation buttons to scroll to

commence searching.

11

Press the Navigation buttons to scroll to

Store and press OK.

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

WATCHING TV

ENG

ENGLISH

ENG

ENGLISH

Assigning a station name

You can assign a station name with five characters

to each programme number.

1 Press HOME to access the Home menu.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3

4

Press the Navigation buttons to scroll to

Manual Tuning and press OK.

5

Press the Navigation buttons to scroll to

TV or Cable TV.

6

Press the Navigation buttons to scroll to

Name and press OK.

7

Press the Navigation buttons to scroll Select

the position and make your choice of the sec-

ond character, and so on. You can use an the

alphabet A to Z, the number 0 to 9, +/ -, and

blank and press OK.

8

Press the Navigation buttons to scroll to

Store and press OK

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

Fine Tuning

Normally fine tuning is only necessary if reception

is poor.

1 Press HOME to access the Home menu.

2 Press the Navigation buttons to scroll to

SETUP and press OK.

3

4

Press the Navigation buttons to scroll to

Manual Tuning and press OK.

5

Press the Navigation buttons to scroll to

TV or Cable TV.

6

Press the Navigation buttons to scroll to

Fine.

7

Fine tune for the best picture and sound.

8

Press the Navigation buttons to scroll to

Store and press OK

When you are finished, press EXIT.

When you return to the previous menu, press

BACK.

WATCHING TV

Page is loading ...

LG 42LV5700 User guide

This manual is also suitable for

LG 42LV5700 User guide

Related papers

Other documents