Freestyle Killer Shark ABC Owner's manual

Freestyle
Brand
Freestyle
Model
Killer Shark ABC
Category
Watches
Type
Owner's manual
ENGLISH
FEATURES:
• 30metersH2O
• Day/date/calendar
• Compasswithdegreesanddirection
• Barometerwithpressuretrend
• Altimeterwithcumulativeascentand
descent
• 99lapmemorychronograph
• Countdowntimer
•5Alarms
•ELbacklight
CONTROL BUTTONS
S1–Start/splitButton
S2–Stop/resetButton
S3–ModeButton
S4–Light/adjustButton
DISPLAY MODES
Thewatchhaseightdisplaymodes:TIME,
COMPASS(COMP),ALTIMETER(ALTI),
BAROMETER(BARO),CHRONOGRAPH
(CHRO),TIMER,ALARMandTEMPERA-
TURE(TEMP).
OPENING SCREEN FOR EACH MODE
Tochangefromonedisplaymodeto
another,pressS3buttononce.Themode
descriptionwillappearforapproximately
2secondsbeforetheselectedmodeis
activated.
TO USE THE BACKLIGHT
PressS4buttontoturnonthebacklight
for3-5seconds.
OTHERS
Inanysetting/viewingmode,ifthereis
nokeymanipulationforapproximately
1-2minutes,thewatchwillautomatically
savetheentereddataandexitthesetting/
viewingmode.
TO SET THE TIME AND CALENDAR
1.PressS3buttontoselectTIME
mode.
2.PressS4buttonforapproximately3
seconds.Themessage“Set-Time”
willbedisplayed.
3.PressS3buttononce,thehour
digitswillblink.
4.PressS1/S2buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
5.PressS3buttononce,theminute
digitswillblink.
6.PressS1/S2buttontosetthe
minutedigits.
7.Followthesamepatterntosetthe
second,year,month,dateandhour
format.
8.Tosettheseconddigits,pressS1/S2
buttontoresettheseconddigitsto
00.
9.Tosetthehourformat,pressS1/S2
buttontotogglebetween12-hour
and24-hourformat.TheP.M.
indicatormaybedisplayedto
indicatethetimeperiod12:00A.M.
–11:59P.M.in12-hourformat.
10.Whennishedmakingallthesettings,
pressS4buttontoconrm.
TO SET NIGHT, CHIME AND BEEP
1.InTIMEmode,pressS4buttonfor
approximately3seconds.Themessage
“Set-Time”willbedisplayed.
2.PressS1/S2buttontoselectoption
mode.Themessage“OPTION”will
bedisplayed.
3.PressS3buttoncontinuouslyto
selectamongNIGHT,CHIMEor
BEEPmode.
4.PressS1/S2buttontoactivateor
deactivateeachmode.
5.Whennishedmakingallthesettings,
pressS4buttontoconrm.
NOTE:WhenNIGHTmodeisactivated,
theNIGHTmodeicon
willappear.The
backlightwillturnonfor3-5seconds
whenanybuttonispressed.NIGHTmode
willturnoffautomaticallyafter8hours.
TO SHOW DUALTIME (T1 OR T2)
1.InTIMEmode,pressandholdS2but-
tontoviewT1orT2timezone.
2.PressandholdS2buttonforapproxi-
mately4secondstoswitchtodisplay
T1orT2timezone.
3.Followthesamepatterntotoggle
betweendisplayingT1andT2time
zones.
TO SHOW CALENDAR OR TEMPERATURE
1.InTIMEmode,pressandholdS1
buttontoviewcalendaror
temperature.
2.PressandholdS1buttonfor4
secondstoswitchtodisplay
calendarortemperature.
3.Followthesamepatterntotoggle
betweentemperatureandcalendar
displays.
TO USE THE COMPASS
Thismovingdotrepresentsthedirection
ofNorth(N).
1.PressS3buttontoselectCOMPASS
mode.Thedirection,degreeand
timewillbedisplayed.
NOTE:InCOMPASSmode,ifthereisno
keymanipulationforapproximately30
seconds,thecompasssensorwillbede-
activatedforpowersaving.PressS1/S2/
S4buttontore-activatethecompasssen-
sor.Ifthecompasssensorisdeactivated
forapproximately10minutes,thewatch
willautomaticallyreturntoTIMEmode.
NOTE:Ifthecompassdoesnotseemto
workwell,forexample:whenitdisplays
thewrongcompassdirectionoritdisplays
“DISTORT”onthescreen,thenyouhave
tocalibratethecompass.Youshouldalso
calibrateitafterreplacingthebattery.If
yourwatchhasbeenexposedtostrong
electromagneticelds,suchaselectric
lines,magnetsorloudspeakers,thenyou
havetocalibrateitagain.
Calibratethecompassbeforeusingitfor
thersttimeandbeforealongtrip.
Becauseofthedifferencebetweentrue
northandmagneticnorth,youhaveto
compensateitbyadjustingthecompass
declination.Thedeclinationangleforyour
localareamaybefoundbelow:
City Declination
 Angle

Anchorage 22E
Atlanta 4W
Bombay 1W
Boston 16W
Calgary 18E
Chicago 3W
Denver 10E
Jerusalem 3E
London 4W
LittleRock 3E
Livingston,MT 14E
Munich 1E
NewYorkCity 14W
Orlando 5W
Oslo 2W
Paris 2W
RioDeJaneiro 21W
SanFrancisco 15E
Seattle 19E
Shanghai 5W
Toronto 11W
Vancouver 20E
WashingtonDC 10W
Waterbury,CT 14W
TO SET THE DECLINATION ANGLE
1.InCOMPASSmode,pressandholdS4
buttonforapproximately3sec-
onds.Themessage“CALIB”willbe
displayed.
2.PressS1/S2buttontoselectdeclina-
tionanglesettingmode.Themessage
“DECLIN”willbedisplayed.
3.PressS3button,Ewillblink.
4.PressS1/S2buttontotogglebetween
E(East)&W(West).
5.PressS3button.Thedeclination
anglewillblink.
6.PressS1/S2tosetthedegreefrom
0˚to90˚.
7.Whennishedmakingallthesettings,
pressS4buttontoreturntoCOMPASS
mode.
TO CALIBRATE THE COMPASS
1. InCOMPASSmode,pressandhold
S4buttonforapproximately3seconds.
Themessage“CALIB”willbedis-
played.
Direction
Degree (0º to 360º)
Time
Sea level
pressure trend
Time
Day
Month
Date & Year
ABC Killer Shark
S1S4
S2S3
ENGLISH
USEFULDEFINITIONS:
ASCENT:
ThecumulativeascentsincetheAltitude
Datawascleared.
DESCENT:
ThecumulativedescentsincetheAltitude
Datawascleared.
DIFFER:
Itdisplaysthedifferenceinaltitudesince
thelastresetofthefunction.
RATE:
Itdisplaystheascent/descentrateinthe
selectedunit,itwillupdatethevalue1
timeperminute.
LOGDATE:
Itdisplaysthetimeanddateatlasttime
AltitudeDatawascleared.
HIGHEST:
Thehighestaltitude,timeanddatesince
theAltitudeDatawascleared.
LOWEST
Thelowestaltitude,timeanddatesince
theAltitudeDatawascleared.
TO SET UP THE ALTIMETER
1. InALTIMETERmode,pressandholdS4
buttonforapproximately1second.The
message“SET-ALTI”willbedisplayed.
2. PressS1/S2buttontoselectamong
altitudesettingmode(SET-ALTI),sea
levelpressuresettingmode(SEA-Lv)
orunitssettingmode(UNITS).
3.PressS3buttononcetoenterinto
eachsettingmode.PressS3button
againtoreturntothemodeselection
screen.
4.Inaltitudesettingmode,press
S1/S2buttontosetthealtitude
digits.
5.Insealevelpressuresettingmode,
pressS1/S2buttontosetthesea
levelpressuredigits.
6.Inunitssettingmode,pressS1/S2
buttontotogglebetweenM(meter)
andFt(feet).
7.Whennishedmakingallthesettings,
pressS4buttontoreturnto
ALTIMETERmode.
NOTE:SET-ALTImeansthatyousetan
altitudereadingthatisequaltocurrent
locationaltitude.Setthereference
altitudeinaplacewhereyouknowthe
altitude,forexample:withthehelpofa
topographicalmap.SEA-Lvmeansthat
youhavetokeyinasealevelpressure.
Thesealevelpressureofyourlocation
canbefoundthroughinformationfrom
aweatherstation.Ifyoudon’tknowyour
currentlocationaltitudeorthecorrectsea
levelpressure,youcanjustsetthesea
levelpressureto1013mbar/29.913inHg.
Thewatchhasafactorysettingthat
correspondstothestandardairpressure
(1013mbar/29.913inHg)atsealevel.
NOTE:Onthenextdaywhenyoure-
startyouractivity,pleasecalibratethe
referencealtitudeagaininorderforthe
altimetertofunctionproperly.
TO SHOW THE LOG DATE AND TIME
1.InALTIMETERmode,pressS2
buttontodisplaylogdateandtime.
2.PressS3buttonorleavethewatch
idlefor5secondstoreturnto
ALTIMETERmode.
TO CLEAR THE DATA
1. InALTIMETERmode,pressandhold
S2buttonforapproximately3seconds
toclearallstatisticdataandgraphic
data.
NOTE:Inthebarchart,afterclearingthe
data,therstnewdatawillbeupdated
after2secondsandanotherwillbetaken
in30minutes.
TO VIEW ALTITUDE AND OTHER INFOR-
MATION
1.InALTIMETERmode,pressS1
buttontotogglebetweentheaccumu-
lativeascent(ASCENT),
accumulativedescent(DESCENT),
differenceinaltitude(DIFFER),rate
(RATE)ortime(TIME).
2. Whiletoggling,eachmodeinALTIM-
ETERisdisplayedforapproximately2
seconds,followedbyadisplayofthe
datainabarchart.
NOTE:Toresetthedifferenceinaltitude
tozero,pressandholdS1buttonfor
approximately3secondswhenthediffer-
enceinaltitudedataisdisplayed.
TO VIEW DATA IN DETAIL
1.InALTIMETERmode,pressS4
buttononce.Themessage“VIEW
DATA”willbedisplayed.
2.After3secondsorbypressing
S1/S2button,themessage
“Highest”willbedisplayed.
3.PressS1buttontoselectdisplaying
thedataofhighestaltitude
(Highest),lowestaltitude(Lowest),
accumulativeascent(ASCENT),
accumulativedescent(DESCENT),
differenceinaltitude(DIFFER)or
theindividualstatisticandgraphic
datarecorded.PressS2buttonto
cycletheselectionbackward.
4.Whendisplayinghighestaltitude,
lowestaltitudeandtheindividual
statisticandgraphicdatarecorded,
thecorrespondinglogtimeanddate
willbeswappinginevery2seconds.
5.PressS3/S4buttonorleavethe
watchidlefor1minutetoreturnto
ALTIMETERmode.
TO USE THE BAROMETER
NOTE:Usethebarometertomeasure
sealevelpressure(shownbytrend)and
absoluteairpressure(shownbycurrent
value).Sealevelpressurerepresents
theunit’sestimateofabsolutepressure
correctedtosealevel(asreportedfrom
aweatherstation,airportorinternet
weatherpage).Absoluteairpressureis
trueatmosphericpressureatcurrent
altitudeandconditions.
Sealevelpressure(trend):
Agraphicalpresentationofsealevel
pressuredevelopmentduringthelast23
hoursin1-hourintervals.Theashing
pointontherightofthedisplayisthe
pointofthenewestmeasurement.The
verticalaxisrepresentssealevelpressure
valueandonesteponthehorizontalaxis
represents1hour.Bymonitoringthese
changesyoucanpredicttheweatherwith
reasonableaccuracy.
SEA-Lv:
Sea-Lvmeansthatyouhavetokeyina
sealevelpressure.Thesealevelpressure
ofyourlocationcanbefoundthrough
informationfromweatherstation.
Ifyoudon’tknowthecorrectsealevel
pressure,youcanjustsetthesealevel
pressure(1013mbar/29.913inHg)atsea
level.
dP/dt:
Itdisplaystheascent/descentrateofthe
sealevelairpressureintheselectedunit
orsealevelpressurechangeperhour,it
willupdatethevalue1timeperhour.
2.PressS3buttontostartthe
calibration.
3.Whenthemessage“2-TURN”is
displayed,aseriesofmovingdots
willbedisplayedattherimofthe
displayandincreaseinclockwise
direction.Rotatethewatch
horizontallyincounter-clockwise
directioninordertofreezethelast
movingblinkingdottostayat12-
hourposition.
4.Whenthewatchisrotated
completelyfor360degrees,the
message“1-TURN”willbe
displayed.Rotatethewatchagain
incounter-clockwisedirection.
5.Tointerruptandstopthecalibration,
pressS4button.Themessage
“DISTORT”willbedisplayedand
thewatchwillreturntoCOMPASS
modeafter3seconds.
6.Whenthecalibrationisdone,the
message“DONE”willbedisplayed
andthewatchwillreturnto
COMPASSmodeafter2seconds.
TO TAKE A NEW “MARK ANGLE”
InCOMPASSmode,
Youmustmoveyour
watchhorizontallyuntilthechosendegree
isdisplayed,thenpressS1buttontotake
a“markangle”.Anewmarkwillblinkto
indicatethemarkeddirectionandanew
“markangle”(indegree)willbedisplayed.
1.PressS1buttontotakeanother
“markangle”.
2.PressS2buttontoreturnto
COMPASSmode.
NOTE:Markanglehelpsyoutofollow
acertaindirectionordegree.Themark
anglealwaysremembersthelastdirec-
tionordegreeselected.Thedefaultmark
angleis0°.
TO SHOW THE LAST “MARK ANGLE”
OR TIME
1.InCOMPASSmode,pressS2button
todisplaythepreviousmarkangle”.A
markwillblinktoindicatetheprevi
ouslymarkeddirectionandthe
previous“markangle”(indegree)will
bedisplayed.
2.PressS2buttonagaintoreturnto
COMPASSmode.
TO USE THE ALTIMETER
1.PressS3buttontoselectALTIMETER
mode.
2.Thelatestaltitudewillbedisplayed
innumericandgraphicformats.
NOTE:Altitudeismeasuredbyusingan
airpressuresensor.Airpressurechanges
constantlyduetovaryingweathercondi-
tions.Therefore,measuredaltitudesin
thesamepositionmayvary.Pressure
variationsduetoweatherconditions,or
indoorair-conditioning,mayaffectalti-
tudereadings.Calibratethealtimeterat
regularintervalstomakesureitremains
accurate.
NOTE:Thepressuresensorrangeis:
(-1600Ft)to(29,500Ft)or(-500M)to
(9,000M).
Altitude
(current value
=197Ft)
Sea level
pressure (trend)
Absolute
air pressure
(current value)
Time
Altitude (bar chart)
Time
ENGLISH
FOR THE MEASUREMENT OF ELAPSED
TIME
InCHRONOGRAPHmode,
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereifleftoff.
3. Toresettozero,pressS2buttonto
stopcounting,thenpressandhold
S2buttonforapproximately3seconds
toresetthecountertozero.
FOR THE MEASUREMENT OF SPLIT TIME
AND LAP TIME
InCHRONOGRAPHmode,
1.PressS1buttontostartcounting.
2.Whilethechronographisrunning,
pressS1buttononcetoregistera
lap.Boththesplittimeandlaptime
willbedisplayed.
After3seconds,thecurrently
accumulatedsplittimeandlaptime
willbedisplayed.
3.Repeatthelaststepuntilallthe
lapshavebeenregistered.
4.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereifleftoff.
5. Toresettozero,pressS2buttonto
stopcounting,thenpressandhold
S2buttonforapproximately3seconds
toresetthecountertozero.
NOTE:Thewatchcanrecorduptoa
maximumof99laps.Duringameasure-
mentofsplittimeandlaptime,the
message“FULL”willbedisplayedwhen
thememoryisfull.
TO USE THE RECALL FUNCTION
1.Afterthemeasurementofsplit
time,pressS4buttontoselect
RECALLmodewhenthe 
chronographisstopped.
2.After2secondsorbypressing
S1/S2button,thesumoftimeofall
lapcounting(TOTAL)willbe
displayed.
3.PressS1/S2buttontoselect
displayingthesumoftimeofalllap
counting(TOTAL),bestlap(BEST),
averagetime(AVERAGE)or
individuallaprecord(LAP-XX).
4.PressS4buttontoreturnto
CHRONOGRAPHmodeorpressS3
buttontoreturntoTIMEmode.
NOTE:Thelaprecord(s)willbecleared
whenchronographisreset.
NOTE:Theaveragetime(AVERAGE)is
thetotaltimeofalllapcountingoverthe
numberoflapcount.
TO SET THE TIMER
1.PressS3buttontoselectTIMER
mode.
2. PressandholdS4buttonforapproxi-
mately3seconds,theseconddigits
willblink.
3.PressS1/S2buttontosetthe
seconddigits.Holdingdownthe
buttonwillspeeduptheprocess.
4.PressS3button,theminutedigits
willblink.
5.PressS1/S2buttontosetthe
minutedigits.
6.PressS3button,thehourdigitswill
blink.
7.PressS1/S2buttontosetthehour
digits.
8.PressS3button,themodeselection
willblink.
9.PressS1/S2toselectamong
countdownstopmode(Cd-STOP),
countdownupmode(Cd-UP)and
LOGDATE:
Itdisplaysthetimeanddateatlasttime
BarometerDatawascleared.
MAX:
Itdisplaysthemaximumabsoluteair
pressureduringtheperiodmeasured,
timeanddate.
MIN:
Itdisplaystheminimumabsoluteair
pressureduringtheperiodmeasured,
timeanddate.
NOTE:Thebarometermeasureschanges
inairpressure,whichyoucanthenapply
toyourownweatherpredictions,itisnot
intendedforuseasaprecisioninstru-
mentinofcialweatherpredictionor
reportingapplication.Ifyouremainatthe
samealtitude,changesinairpressure
helpyoutopredictchangesinweather
conditions.
Suddentemperaturechangescanaffect
barometersensorreadings.
1.PressS3buttontoselect
BAROMETERmode.
2.Thelatestsealevelpressurewill
bedisplayedinnumericandgraphic
formats.
TO SET UP THE BAROMETER
1.InBAROMETERmode,pressand
holdS4button.Themessage“Sea
-Lv”willbedisplayed.
2.PressS1/S2buttontoselectamong
sealevelpressuresettingmode
(Sea-Lv)orunitssettingmode
(UNITS).
3.PressS3buttononcetoenterinto
eachsettingmode.PressS3button
againtoreturntothemode
selectionscreen.
4.Insealevelpressuresettingmode,
pressS1/S2buttontosetthesea
levelpressuredigits.
5.Inunitssettingmode,pressS1/S2
buttontotogglebetweenblinking
mbar(millibar)andinHg(inchof
Mercury).
6.Whennishedmakingallthesettings,
pressS4buttontoreturnto
BAROMETERmode.
TO SHOW THE LOG DATE AND TIME
1. InBAROMETERmode,pressS2
buttontodisplaylogdateandtime.
2. PressS3buttonorleavethewatch
idleforapproximately5secondsto
returntoBAROMETERmode.
NOTE:Thesealevelbarometricpressure
(SLP)datacanbegatheredfromrelevant
websites,weatherstationsorother
sourcesofthistypeofinformation.For
example,USresidentscangatherthe
SLPdatafromNationalWeatherService
(http://www.nws.noaa.gov/)oranFAA
FlightServiceStation.
TO CLEAR THE DATA
1. InBAROMETERmodepressandhold
S2buttonforapproximately3seconds
toclearallstatisticdataandgraphic
data.
Beforemeasuringpressureyouhaveto
keyinandresetcertaindataintheinitial
settingandcleardataeverytime,inorder
tohaveamoreaccuratemeasurement.
BAROMETERmode
Initialsetting(keyinthe
“SET-Lv”forsettingsea
levelpressure)
Dataclear
Measuringcanstart
NOTE:Inthebarchart,afterclearing
thedata,newdatawillbeupdatedafter
2secondsandanotherwillbetakenin
anhour.
TO VIEW BAROMETER AND OTHER
INFORMATION
1.InBAROMETERmode,pressS1
buttontoselectdisplayingthedata
ofsealevelpressure(SEA-Lv),sea
levelpressurechangeperhour
(dP/dt)ortime(TIME).
2.PressS1buttoncontinuouslyto
viewdataofSealevelpressure,
dP/dt(sealevelpressurechange
perhour)andTime.
3. Aftershowingtheindividualdataat
thebottomforapproximately2
seconds,thedataintrend(graphic)
formatwillbedisplayedatthetop.
TO VIEW DATA IN DETAIL
1.InBAROMETERmode,pressS4
buttononce.Themessage“VIEW
DATA”willbedisplayed.
2.Afterapproximately2secondsorby
pressingS1/S2button,themessage
“MAX”willbedisplayed.
3.PressS1buttontoselectdisplaying
thedataofmaximumabsolute
pressure(MAX),minimumabsolute
pressure(MIN)orthestatisticand
graphicdatarecorded.PressS2
buttontocycletheselection
backward.
4.Whendisplayingmaximum
absolutepressure,minimum
absolutepressureandtheindividual
statisticandgraphicdatarecorded,
thecorrespondinglogtimeanddate
willbeswappinginevery2seconds.
5.PressS3/S4buttontoreturnto
BAROMETERmode.
NOTE:Becausethebarometerand
altimeterbothuseairpressure,onlyone
ofthesemodesmaybeactivatedata
time.Therefore,youwillhavetoactivate
thebarometerseparatelyforuse.
TO USE THE CHRONOGRAPH
1.PressS3buttontoselect
CHRONOGRAPHmode.
2.Thechronographwillthenbe
displayedinitscurrentstate–reset,
runningorstopped.
3.Toresumeacounting,pressS1
buttontoresumefromwhereitleft
off.
4.Tostartanewcounting,resetthe
chronographtozerorst.
PressS2buttontostopcounting,
thenpressandholdS2buttonfor
approximately3secondstoresetthe
countertozero.
CHRO or Lap#
Split time
Lap time
Countdown time
Mode
ENGLISH
countdownrepeatmode(REP-00).
10.Whennishedmakingallthesettings,
pressS4buttontoconrm.
TO USE THE TIMER
Incountdownstopmode(Cd-STOP),
1.PressS1buttontostartcounting.
Thetimericon
willappear.
2.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereitleftoff.
3.Toreloadthetimer,pressS2button
tostopcounting,andthenpressS2
buttonagaintoreloadthetimerto
thepresetvalue.
4.Afterreachingzeroinacountdown,
abeepsoundwillbeemittedand
thetimericon
willblinkfor10
seconds.Thetimerwillthenbe
reloadedtothepresetvalue.
Incountdownupmode(Cd-UP),
1.PressS1buttontostartcounting.
Thetimericon
willappear.
2.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereitleftoff.
3.Afterreachingzeroinacountdown,
abeepsoundwillbeemittedand
thetimeicon
willblinkfor10
seconds.Thetimerwill
startcountingupsimultaneously.
4.PressS2buttononcetostop
counting.PressS2buttonagainto
reloadthetimertothepresetvalue.
Incountdownrepeatmode(REP-00),
fortimevalue<1minute:
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereitleftoff.
3.Afterreachingzeroinacountdown,
abeepsoundwillbeemittedfor1
second.Thetimerwillrepeat
countingatthepresetvalue
simultaneously.
4.PressS2buttononcetostop
counting.PressS2buttonagainto
reloadthetimertothepresetvalue.
fortimevalue>1minute:
1.PressS1buttontostartcounting.
2.Tostopcounting,pressS2button.
PressS1buttontoresumefrom
whereitleftoff.
3.Afterreachingzeroinacountdown,
abeepsoundwillbeemittedand
thetimericon
willblinkfor10
seconds.Thetimerwillrepeat
countingatthepresetvalue
simultaneously.
4.PressS2buttononcetostop
counting.PressS2buttonagainto
reloadthetimertothepresetvalue.
NOTE:Incountdownrepeatmode,the
maximumnumberofrepetitionis100
(REP-00toREP-99).
NOTE:Whentimerbeepsoundisemitted,
pressanybuttontodisablethebeep
sound.
TO SELECT AND SET ON/OFF THE
ALARM
1.PressS3buttontoselectALARM
mode.
2.PressS2buttontoselectfrom
ALARM1(AL-1)toALARM5(AL-
5).Eachalarmcanbesetas
differentmodes-timealarm,
altitudealarmorpressurealarm.
3.PressS1buttontotogglebetween
onandoffofthealarm.Ifthealarm
ison,thealarmicon
willappear.
TO SELECT THE ALARM MODE OF INDI-
VIDUAL ALARM
1.Inindividualalarm(AL-1toAL-5),
pressandholdS4buttonforap-
proximately3seconds.Themessage
“Time-AL”willbedisplayed.
2.PressS1/S2buttontoselecttime
alarmsettingmode(Time-AL),
altitudealarmsettingmode(ALTI-
AL)orpressurealarm(BARO-AL).
3.PressS3buttontoenterintoeach
settingmode.
4.PressS4buttontoreturntoALARM
mode.
TO SET THE TIME ALARM
Intimealarmsettingmode,
1.PressS1/S2buttontosetthehour
digits.Holdingdownthebuttonwill
speeduptheprocess.
2.PressS3buttononce,theminute
digitswillblink.PressS1/S2button
tosettheminutedigits.
3.PressS3buttontosetthetime
zone.PressS1/S2buttontotoggle
betweenT1andT2timezones.
4.Whennishedmakingallthe
settings,pressS4buttontoreturn
toALARMmode.
TO SET THE ALTITUDE ALARM
Inaltitudealarmsettingmode,
1.PressS1/S2buttontosetthe
altitudevalue(inunitsM(meter)or
Ft(feet)).Holdingdownthebutton
willspeeduptheprocess.
2.Whennishedmakingallthe
settings,pressS4buttontoreturn
toALARMmode.
NOTE:Whenaltitudearrivesoroverthe
setvalue,abeepsoundwillbeemitted
for20seconds.Thenthealarmwillbe
deactivatedautomatically.
NOTE:Thealtitudevaluecanbesetfrom
-1600ft.(-500m)to29500ft.(9000m).
TO SET THE PRESSURE ALARM
Inpressurealarmsettingmode,
1.PressS1/S2buttontosetthe
pressurevalue(inunitsmbar
(millibar)orFt(feet)).Holdingdown
thebuttonwillspeedupthe
process.
2.Whennishedmakingallthe
settings,pressS4buttontoreturn
toALARMmode.
WHEN AN ALARM GOES OFF
Whenanyalarmalerts,pressanybutton
tostopthealarm.
NOTE:Individualalarmwillautomatically
beactivatedafterbeingset.
TO SHOW THE TEMPERATURE
1.PressS3buttontoselect
TEMPERATUREmode.
2.PressS1/S2buttontotoggle
betweenºCandºF.
TO SET THE OFFSET
InTEMPERATUREmode,
1. PressandholdS4buttonforapproxi-
mately3seconds,thetemperature
valuewillblink.
2.PressS1/S2tooffsetthe
temperaturevalue(inunitsºCor
ºF).
3.Whennishedmakingallthe
settings,pressS4buttontoreturn
toTEMPERATUREmode.
NOTE:Thetemperatureoffsetrangeis
+/-5ºCor+/-10ºF.
NOTE:Thetemperaturemeasuringrange
is-10ºC-60ºCor14ºF-140ºF.
NOTE:Ifthemeasuredtemperaturevalue
isoutofmeasuringrange,thetempera-
turevaluewillbeshownas“---”.
NOTE:Foraccurateairtemperature,the
watchmustbeoffthewrist.
Toreducecarbonfootprint,these
SHARKinstructionsareprintedwith
soyinksonrecycledpaper.
SHARK-FS8120-ABCKillerShark-AG8744-R04
Alarm time
Alarm (1 - 5)
Temperature
Time
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20
  • Page 21 21
  • Page 22 22
  • Page 23 23
  • Page 24 24
  • Page 25 25
  • Page 26 26
  • Page 27 27
  • Page 28 28

Freestyle Killer Shark ABC Owner's manual

Freestyle
Brand
Freestyle
Model
Killer Shark ABC
Category
Watches
Type
Owner's manual
Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

in other languages

Related papers

Other documents