Milwaukee 49-24-0200 User manual

Category
Radios
Type
User manual

This manual is also suitable for

JOB SITE RADIO
RADIO DE CHANTIER
RADIO EN EL SITIO DE TRABAJO
OPERATOR'S MANUAL
MANUEL de L'UTILISATEUR
MANUAL del OPERADOR
TO REDUCE THE RISK OF INJURY, USER MUST READ AND UNDERSTAND OPERATOR'S MANUAL.
AFIN DE RÉDUIRE LE RISQUE DE BLESSURES, L'UTILISATEUR DOIT LIRE ET BIEN COMPRENDRE LE
MANUEL DE L'UTILISATEUR.
PARA REDUCIR EL RIESGO DE LESIONES, EL USUARIO DEBE LEER Y ENTENDER EL MANUAL DEL
OPERADOR.
Catalog No.
No de Cat.
Catálogo No.
49-24-0200
page 2
WARNING!
READ, UNDERSTAND AND FOLLOW ALL INSTRUCTIONS.
Failure to heed all warnings listed below, may result in electric shock, fire and/or serious
personal injury.
KEEP THESE INSTRUCTIONS.
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keeps these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water. Never immerse the appa-
ratus in liquid or allow a liquid to flow inside the apparatus. Water
entering an apparatus will increase the risk for electric shock.
6. Clean only with dry cloth. Certain cleaning agents and solvents
are harmful to plastics and other insulated parts. Some of these
include: gasoline, turpentine, lacquer thinner, paint thinner, chlori-
nated cleaning solvents, ammonia and household detergents con-
taining ammonia. Clean dust and debris from vents. Keep the
apparatus handle clean, dry and free of oil or grease.
7. Do not block any ventilation openings. Install in accordance
with the manufacturers instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers) that pro-
duce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a
third grounding prong. The wide blade or the third prong are pro-
vided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched
particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus. Do not abuse the cord. Never use the
cord to carry the radio or pull the plug from an outlet. Keep cord
away from heat, oil, sharp edges or moving parts. Replace damaged
cords immediately. Damaged cords increase the risk of electric shock
and may create a fire.
11. Use only attachments/accessories specified by the
manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing
is required when the radio has been damaged in any way, such as
power-supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the radio, the radio has been exposed to
rain or moisture or does not operate normally. Service or mainte-
nance performed by unqualified personnel could result in a risk of
injury.
14. A battery operated radio with integral batteries or a sepa-
rate battery pack must be recharged only with the specified
charger for the battery. A charger that may be suitable for one
type of battery may create a risk of fire when used with another
battery.
15. Use battery operated radio only with specifically designated
battery packs. Use of any other batteries may create a risk of fire.
16. When battery pack is not in use, keep it away from other
metal objects like: paper clips, coins, keys, nails, screws,
or other small metal objects that can make a connection
from one terminal to another. Shorting the battery terminals
together may cause sparks, burns, or a fire.
17. Avoid body contact with grounded surfaces such as pipes,
radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is grounded.
18. Do not use any adaptor plugs.
19. When operating a radio outside, use an outdoor
extension cord marked W-A or W. These cords are rated
for outdoor use and reduce the risk of electric shock.
20. Never disassemble the radio or try to do any rewiring on
the radio's electrical system.
21. Do not expose this apparatus to dripping and splashing, or
place objects filled with liquids on this unit.
1. Maintain labels and nameplates. These carry important information. If unreadable or missing, contact a MILWAUKEE service facility for a free
replacement.
2. This radio is designed to be powered by a standard 120 volt AC line or AC generator. It may also be powered using a 12, 14.4 or 18
volt MILWAUKEE Power Plus battery pack. Do not attempt to use with any other voltage or power supply.
SPECIFIC SAFETY RULES
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE
FOLLOWING TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE,
AND (2) THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
Federal
Communications
Commission
Volts
AC
120
Cat. No.
49-24-0200
Specifications
mA
500
page 3
Double Insulated Radios:
Radios with Two Prong Plugs
Radios marked Double Insulated
do not require grounding. They
have a special double insulation
system which satisfies OSHA re-
quirements and complies with the
applicable standards of Under-
writers Laboratories, Inc., the Ca-
nadian Standard Association and
the National Electrical Code.
Double Insulated radios may be
used in either of the 120 volt out-
lets shown in Figures A and B.
Fig. A
Fig. B
Guidelines for Using Extension Cords
If you are using an extension cord outdoors, be sure it is marked
with the suffix W-A (W in Canada) to indicate that it is accept-
able for outdoor use.
Be sure your extension cord is properly wired and in good elec-
trical condition. Always replace a damaged extension cord or
have it repaired by a qualified person before using it.
Protect your extension cords from sharp objects, excessive heat
and damp or wet areas.
Unplug all cords during lightning storms or when unused for long
periods of time.
Amps
Double Insulated
Symbology
Volts Alternating Current
Underwriters Laboratories, Inc.
(UL Listed to U.S. and Canadian
safety standards)
Caution. Risk of electric shock.
Presence of important operating
instructions.
Hertz
Federal Communications
Commission
Double insulated tools can use either a two or three wire extension cord.
As the distance from the supply outlet increases, you must use a heavier
gauge extension cord. Using extension cords with inadequately sized wire
causes a serious drop in voltage, resulting in loss of power and possible
tool damage. Refer to the table shown to determine the required minimum
wire size.
The smaller the gauge number of the wire, the greater the capacity of the
cord. For example, a 14 gauge cord can carry a higher current than a 16
gauge cord. When using more than one extension cord to make up the total
length, be sure each cord contains at least the minimum wire size required.
If you are using one extension cord for more than one tool, add the name-
plate amperes and use the sum to determine the required minimum wire
size.
Nameplate
Amperes
0 - 5
5.1 - 8
8.1 - 12
12.1 - 15
15.1 - 20
Extension Cord Length
25'
16
16
14
12
10
75'
16
14
12
10
10
100'
14
12
10
10
--
150'
12
10
--
--
--
200'
12
--
--
--
--
Recommended Minimum Wire Gauge
for Extension Cords*
* Based on limiting the line voltage drop to five
volts at 150% of the rated amperes.
50'
16
16
14
12
10
READ AND SAVE ALL INSTRUCTIONS
FOR FUTURE USE.
page 4
FEATURES
Battery Compartment
This radio can be powered using a MILWAUKEE Power-Plus 12, 14.4 or 18
volt battery. Run time can be maximized using an 18 volt battery.
For your convenience, this radio has a deep discharge prevention feature
that stops the radio if a battery pack is running too low. This prevents a full
electrical discharge and prolongs the life of the battery.
Stereo AUX Jack
This jack can be used to import the audio sound of a CD player,
MP3 player or other audio device.
12 Volt DC Output Jack
This jack can be used to charge a cell phone, power a CD player or any
other device that uses less than one (1) amp of DC electrical current.
NOTE: Any device that uses more than one (1) amp of DC electrical current
will trip a self-resetting function and disable the output.
Detachable Bag
This water-resistant bag is designed to store a portable CD player, cell
phone and pencils or pens.
20 Station AM/FM Preset
Up to 10 different radio stations per frequency band can be programed into
memory for faster tuning.
Clock/Preset Backup
The clock and station presets are maintained by two (2) double AA
batteries, located on the bottom of the radio unit. Batteries are included.
Mono or Stereo Sound
Push down the tuning knob to switch between Mono or Stereo sound.
Mono sound is better for listening to talk radio and for receiving weaker
radio signals.
Weather Band Station
Seven (7) different weather forecast stations are programmed into memory
for faster tuning.
The broadcast range from the weather radio transmitter is approximately
forty miles. The effective range depends on such things as terrain and
quality of indoor/ outdoor antenna. Some stations may not be available in
all locations.
For more information on weather band stations, visit the following address
on the Internet: www.nws.noaa.gov/nwrhome.html
Punch EQ Button
This bass boost can be set to three different levels of output or turned off.
Durable Construction
This radio is designed to withstand harsh operating environments as well
as unintentional drops.
External Antenna Connection
Allows connection of an additional antenna which may improve reception
for FM and weather band frequencies.
FUNCTIONAL DESCRIPTION
7
10
8
9
6
3
3
11
12 13
16
1. On/off volume control knob
2. Tuning knob (Mono/Stereo button)
3. Display window
4. Battery compartment
5. Lock/ release latch
6. CLOCK button
7. MODE button
8. MEM button
9. PRESET button
10. Punch EQ button
11. Stereo AUX jack
12. Detachable bag hooks
13. External antenna connection
14. Line cord
15. 12 volt DC output jack
16. Soft grip
17. Protective handle
18. Detachable bag
15
17
18
4
5
1
2
14
Output wiring is
center positive
page 5
OPERATION
To reduce the risk of fire or electric shock, do not expose this
radio to rain or moisture.
WARNING!
Installing Battery Pack (Fig. 1 & 2)
1. Lift lock/release latch to open battery compartment.
2. Insert battery pack all the way until you here a click.
3. Close battery compartment door and secure the lock/release latch.
Removing Battery Pack (Fig. 1 & 2)
1. Lift lock/release latch to open battery compartment
2. Push the eject button and pull the battery pack out.
3. Close battery compartment door and secure the lock/release latch.
Finding Stations
Selecting Band:
Push the MODE button to select AM, FM, or weather band before tuning.
Manual Tuning:
Turn the tuning knob right or left until it clicks to step through stations on
the current frequency band.
Auto Seek Tuning:
Turn the tuning knob slightly and hold for one (1) second or more. The
radio automatically tunes to the nearest station on the current frequency
band. Turn the tuning knob clockwise to go up on the band frequency,
counterclockwise to go down on the band frequency.
Fig. 2
Fig. 1
Eject button
To power the radio, plug the cord into an appropriate AC outlet or install
a suitable battery pack.
Setting Clock
1. Push the CLOCK button to view time.
NOTE: Radio has to be powered on.
2. Push MEM button. Display window will flash.
3. Turn the tuning knob clockwise to set hours, counterclockwise to
set minutes.
4. Push the MEM button or wait five (5) seconds to set time.
Setting Preset Stations
1. Select AM or FM band with the MODE button.
2. Tune to desired station.
3. Press the MEM button.
NOTE: "MEMORY" will appear in the top right corner of the display
window.
4. Use the PRESET button to select a number one (1) through 10.
5. Push the MEM button to store preset selection.
Using Punch EQ Feature
Push the Punch EQ button to set the desired level of bass sound. The
level of sound is indicated by the color of the Punch EQ button
as follows:
Off- No Light
Low- Green Light
 Medium- Orange Light
 High- Red Light
Using Stereo AUX Jack
1. Turn the volume down all the way using the on/off volume control
knob. This is to prevent speaker blowout.
2. Plug the auxiliary device into the Stereo AUX jack.
3. Press MODE button until "AUX" appears in the bottom left corner of
the display window.
4. Press the "PLAY" button on the auxiliary device.
5. Adjust volume to desired level using the on/off volume control knob.
NOTE: When in this mode the clock appears in the display window
and A.M. may also be displayed depending on time of day.
page 6
2. Remove the screw and battery cover.
3. Insert two (2) AA batteries according to matching positive (+) and
negative (-) marks.
NOTE: If the radio is unplugged, replace batteries within 15 seconds
to avoid loosing preset station memory.
4. Replace the battery cover and screw.
Fig. 3
Battery cover
Changing or Installing Clock Batteries (Fig. 3)
1. If the clock display begins to fade, change the batteries.
WARNING!
Batteries may leak chemicals or may explode if used incor-
rectly. The following care should be taken to prevent such
an incident:
Make sure the positive (+) and negative (-) battery
terminals are positioned correctly.
Do not mix new and old batteries together, or mix
different types of batteries.
Do not try to recharge non-rechargeable batteries.
If chemicals from the batteries come in contact with your
skin, wash them off immediately with water. If chemicals
leak onto the unit, clean the unit completely.
18 Volt Battery Pack
Cat. No. 48-11-2230
14.4 Volt Battery Pack
Cat. No. 48-11-1024
12 Volt Battery Pack
Cat. No. 48-11-1960 & Cat. No. 48-11-1900
One-Hour Universal Charger
Cat. No. 48-59-0245
One-Hour Universal Vehicle Charger
Cat. No. 48-59-0186
WARNING!
Charge only 12, 14.4 and 18 volt battery packs in a charger.
Other types of batteries may explode causing personal
injury and damage.
ACCESSORIES
To reduce the risk of injury, always unplug the tool before
attaching or removing accessories. Use only specifically
recommended accessories. Others may be hazardous.
WARNING!
FIVE YEAR TOOL LIMITED WARRANTY
Every MILWAUKEE tool is tested before leaving the factory and is war-
ranted to be free from defects in material and workmanship. MILWAUKEE
will repair or replace (at MILWAUKEEs discretion), without charge, any
tool (including battery chargers) which examination proves to be defec-
tive in material or workmanship from five (5) years after the date of
purchase. Return the tool and a copy of the purchase receipt or other
proof of purchase to a MILWAUKEE Factory Service/Sales Support
Branch location or MILWAUKEE Authorized Service Station, freight pre-
paid and insured. This warranty does not cover damage from repairs
made or attempted by other than MILWAUKEE authorized personnel,
abuse, normal wear and tear, lack of maintenance, or accidents.
Battery Packs, Flashlights, and Radios are warranted for one (1) year
from the date of purchase.
THE REPAIR AND REPLACEMENT REMEDIES DESCRIBED HEREIN ARE
EXCLUSIVE. IN NO EVENT SHALL MILWAUKEE BE LIABLE FOR ANY
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGES, INCLUDING
LOSS OF PROFITS.
THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRAN-
TIES, OR CONDITIONS, WRITTEN OR ORAL, EXPRESSED OR IMPLIED FOR
MERCHANTABLILITY OR FITNESS FOR PARTICULAR USE OR PURPOSE.
This warranty gives you specific legal rights. You may also have other
rights that vary from state to state and province to province. In those
states that do not allow the exclusion of implied warranties or limitation
of incidental or consequential damages, the above limitations or exclu-
sions may not apply to you. This warranty applies to the United States,
Canada, and Mexico only.
For a complete listing of accessories refer to your MILWAUKEE Electric
Tool catalog or go on-line to www.milwaukeetool.com. To obtain a
catalog, contact your local distributor or a service center.
58-14-3895d3 10/04 Printed in China
MILWAUKEE ELECTRIC TOOL CORPORATION
13135 West Lisbon Road Brookfield, Wisconsin, U.S.A. 53005
UNITED STATES
MILWAUKEE Service
MILWAUKEE prides itself in producing a
premium quality product that is
N
OTHING BUT HEAVY DUTY
®
.
Your satisfaction with our products is
very important to us!
If you encounter any problems with the
operation of this tool, or you would like to
locate the factory Service/Sales Support Branch
or authorized service station nearest you,
please call...
1-800-SAWDUST
(1.800.729.3878)
NATIONWIDE TOLL FREE
Monday-Friday 8:00 AM - 4:30 PM Central Time
or visit our website at
www.milwaukeetool.com
For service information, use the 'Service Center
Search' icon found in the 'Parts & Service' section.
Additionally, we have a nationwide network of
authorized Distributors ready to assist you with your
tool and accessory needs. Check your Yellow Pages
phone directory under Tools-Electric for the names
& addresses of those nearest you or see the
'Where To Buy' section of our website.
Corporate After Sales Service - Technical Support
Brookfield, Wisconsin USA
Technical Questions Service/Repair Questions Warranty
1-800-SAWDUST
(1.800.729.3878)
fax:1.800.638.9582
Monday-Friday 8:00 AM - 4:30 PM Central Time
CANADA
Service MILWAUKEE
MEXICO
Servicios de MILWAUKEE
Milwaukee Electric Tool
Blvd. Abraham Lincoln no. 13
Colonia Los Reyes Zona Industrial
Tlalnepantla, Edo. México C.P. 54073
Tel. 55 5565-1414 Fax: 55 5565-6874
Adicionalmente, tenemos una red nacional de
distribuidores autorizados listos para ayudarle con
su herramienta y sus accesorios. Por favor, llame
al 55 5565-1414 para obtener los nombres y
direcciones de los más cercanos a usted, o consulte
la sección Where to buy (Dónde comprar) de
nuestro sitio web en
www.milwaukeetool.com
Notre réseau national de distributeurs agréés se tient
à votre disposition pour fournir laide technique,
loutillage et les accessoires nécessaires. Composez
le 416.439.4181 pour obtenir les noms et adresses
des revendeurs les plus proches ou bien consultez
la section «Où acheter» sur notre site web à ladresse
www.milwaukeetool.com
MILWAUKEE est fier de proposer un produit de
première qualité NOTHING BUT HEAVY DUTY
®
. Votre
satisfaction est ce qui compte le plus!
En cas de problèmes dutilisation de loutil ou
pour localiser le centre de service/ventes ou le
centre dentretien le plus proche, appelez le...
416.439.4181
fax: 416.439.6210
Milwaukee Electric Tool (Canada) Ltd
755 Progress Avenue
Scarborough, Ontario M1H 2W7
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6
  • Page 7 7
  • Page 8 8
  • Page 9 9
  • Page 10 10
  • Page 11 11
  • Page 12 12
  • Page 13 13
  • Page 14 14
  • Page 15 15
  • Page 16 16
  • Page 17 17
  • Page 18 18
  • Page 19 19
  • Page 20 20

Milwaukee 49-24-0200 User manual

Category
Radios
Type
User manual
This manual is also suitable for

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI