PLEASE READ AND SAVE THIS MANUAL WITH YOUR ORIGINAL RECEIPT
Customer Service: 1-800-955-0959
VEUILLEZ LIRE CE MANUEL ET LE CONSERVER AVEC LE TALON D’ACHAT
Service clientèle (Canada) : 1-800-665-4339
POR FAVOR, LEA Y GUARDE ESTE MANUAL CON EL RECIBO ORIGINAL
Dpto. de Atención al Cliente: 1-800-955-0959
USE AND CARE MANUAL
MANUEL D’EMPLOI ET D’ENTRETIEN
MODO DE EMPLEO Y DE CUIDADO
PAPER SHREDDER
Personal Series
DESTRUCTEUR DE DOCUMENTS
Série usage personnel
DESTRUCTORA DE DOCUMENTOS
Serie de uso personal
MODELS / MODÈLES / MODELOS
FS5, FS5+, FS5M, P-5, P-5+, P-5M
1
PRODUCT USAGE GUIDE
FS5 / P-5 FS5+ / FS5M / P-5+ / P-5M
Sheet capacity*: 5 5
Shred type: Strip Strip
Shred size: 1/4" 1/4"
Entry width: 9" 9"
Recommended use: 10-20 shredding passes per day
Maximum running time: 3-5 min. on / 15 minutes off
*Sheet capacity measured with 20 lb., 8-1/2" x 11" paper with the shredder operating at rated voltage.
Different paper weights, humidity, and electrical currents will affect capacity.
CARACTÉRISTIQUES
FS5 / P-5 FS5+ / FS5M / P-5+ / P-5M
Capacité de destruction (feuilles)* : 5 5
Type des déchets : Bandes Bandes
Dimension des déchets : 7 mm 7 mm
Largeur d’entrée : 230 mm 230 mm
Emploi recommandé : 10 à 20 passages de feuilles par jour
Cycles d’utilisation conseillés : 3 à 5 minutes marche / 15 minutes arrêt
*Capacité de destruction mesurée pour du papier 20 lb 8-1/2x11" (A4/70gsm), le destructeur fonctionnant sur
tension nominale. Les différents grammages du papier, l’humidité et la tension affecteront la capacité.
CARACTERÍSTICAS
FS5 / P-5 FS5+ / FS5M / P-5+ / P-5M
Capacidad de destrucción (hojas)*: 5 5
Tipo de corte: Tiras Tiras
Dimensión de corte: 1/4" (7 mm) 1/4" (7 mm)
Ancho de entrada: 9" (230 mm) 9" (230 mm)
Uso recomendado: de 10 a 20 pasadas diarias por la destructora
Tiempo máx. de funcionamiento: 3-5 min. encendido / 15 min. apagado
*La capacidad de destrucción se calculó con hojas de 20 lb. 8-1/2" x 11" (A4/70gsm), con la destructora funcionando al voltaje nomi-
nal. Cambiando el peso del papel, la humedad y el voltaje se afecta tal capacidad.
2
IMPORTANT SAFEGUARDS
• NEVER insert hands or fingers into paper entry as serious personal
injury may result.
• THIS MACHINE IS NOT A TOY. Keep children and pets away from
shredder AT ALL TIMES as serious injury may result. Always
unplug shredder when not in use.
• Keep loose objects (jewelry, ties, long hair) away from shredder.
These items and others like them may cause serious injury if they
accidentally fall into the paper entry.
• Model FS5 / P-5 is not supplied with a basket. When selecting a bas-
ket, make certain the basket provides a stable base for the shredder.
High, narrow baskets may create an unstable, top-heavy situation.
• Do not exceed recommended sheet capacity.
• Do not shred plastic, continuous forms, adhesive labels, trans-
parencies, newsprint, or cardboard.
• This personal shredder is intended for paper only. Do not attempt
to shred paper clips or other hard materials (except staples).
• Do not place shredder near or over a heat source or water.
• Always turn off and unplug unit before moving or cleaning and
when not in use.
• Do not insert aerosol cleaners or lubricants into or around the
shredder. Some agents may combust, causing serious injury.
• Do not use this product if it or the cord has been damaged in any
way.
• Do not open the cover for any reason. Doing so can expose you to
dangerous voltages and will void your warranty.
Power Cord Care
• Place power cord in an easily accessible position, because it is the
main disconnect switch.
• Do not place machine where adults, children or animals may walk
on the cord.
• Do not rest anything on the power cord.
• If an extension cord is used, be sure that all products plugged into
the extension cord do not exceed the extension cord ampere rating.
®
Figure 1
®
A. Paper entry
B. Basket (Model FS5+,
FS5M, P-5+, P-5M
only)
C. Power switch
D. Auto-start sensor
E. Shredder head
A
B
E
D
C
PARTS OF THE SHREDDER
ASSEMBLY
NOTE: For assembly of Model FS5+ / FS5M / P-5+ / P-5M, simply
place shredder head onto supplied basket. No adjustments
are necessary.
To adjust and fit Model FS5 / P-5 shredder head onto basket:
1. Position shredder head over basket. Extend adjustable arm to fit
width of basket as shown in Figure 1.
2. Lower shredder head onto basket so that adjustable arm fits over
the rim of the basket.
3
OPERATION
This product features an auto-start sensor. This
sensor will turn on the cutting blades whenever
anything is inserted into the paper entry (while the power switch is in
the
AUTO
position). For the safety of pets and children, we recom-
mend always moving the power switch to
OFF
and unplugging when-
ever the shredder is unattended or not in use.
1. Assemble shredder head to basket (see “ASSEMBLY”).
Note:
Model FS5/P-5 does not come supplied with a basket, but will fit
most wastepaper baskets.
2. Remove any paper clips or other foreign objects (except staples)
from paper. If folding paper to fit paper entry, adjust sheet capaci-
ty appropriately.
Do not attempt to shred paper clips or other
hard materials (except staples) with this
machine. Extensive use of paper clips or other hard materials will
result in damage to the cutting system and will void the manufactur-
er's warranty.
3. Be sure power switch is in the
OFF
(O) position. Plug shredder
into the proper power supply outlet.
4. Move power switch to
AUTO
(I) position. As soon as the unit is
turned on and in standby mode, the shredder is ready to be fed
paper through the paper entry.
NEVER insert hands or fingers into paper entry
as serious personal injury may result.
Do not exceed recommended sheet capacity (see
“Product Usage Guide” on page 1).
5. Slide paper straight into paper entry until the shredder auto-
matically begins shredding.
The shredder automatically stops when shredding is complete.
Continue shredding as desired to a
MAXIMUM shredding time
of 3-5 minutes. At this time, the machine MUST be allowed to
“cool down” for a MINIMUM of 15 minutes. (See “Cool-
Down Cycle” section for more information.)
If the shredder jams or shuts off before the maximum shredding
time, see “Clearing a Jam” section for further instructions.
6. Move power switch to
OFF
(O) position when shredding is com-
plete.
7. Unplug power cord from outlet when shredder is not in use.
8. Look to see if basket is full. If full, lift off shredder head and
empty basket contents. Replace shredder head into position on
basket.
Cool-Down Cycle
This shredder is protected with a special safety feature which prevents
the motor from overheating with extensive use.
When shredding is
attempted beyond the machine's maximum running time, the
shredder will automatically shut off its motor until it has
cooled to an acceptable operating level.
This is normal and the
shredder will return to operation after the “cool-down” period. See
“Product Usage Guide” (page 1) for maximum running time and
related cooling or “off” time.
Clearing a Jam
If the shredder sheet capacity is exceeded or paper is not put in
straight, a jam may result. See “Product Usage Guide” (page 1) for
maximum sheet capacity for your shredder. In the case of a jam, the
machine will “bog down” and fail to shred the paper.
To clear a jam:
1. Move the power switch to the
REVERSE (R) position. (If waste
basket is full, empty it before clearing jam.) The shredder will
reverse the paper to clear the jam.
2. If the shredder jams in reverse, move the power switch to AUTO
(I) and allow to run for about five seconds. If jam does not clear,
move power switch to REVERSE (R) again and allow to run for
about five seconds. Repeat this procedure until the jam is
cleared. If necessary, use care to grasp the paper carefully and
pull out to clear the jam.
3. Once the jam is cleared, move the power switch to AUTO(I) for
continued shredding or OFF (O) if shredding is complete.
4
TROUBLESHOOTING LIMITED WARRANTY
Fellowes warrants all parts of the machine to be free of defects in
material and workmanship for 1 year from the date of purchase by
the original consumer. If any part is found to be defective during the
warrant period, your sole and exclusive remedy will be repair or
replacement, at Fellowes’ option and expense, of the defective part.
This warranty does not apply in cases of abuse, mishandling or unau-
thorized repair. ANY IMPLIED WARRANTY, INCLUDING THAT OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS
HEREBY LIMITED IN DURATION TO THE APPROPRIATE WARRANTY
PERIOD SET FORTH ABOVE. In no event shall Fellowes be liable for
any consequential or incidental damages attributable to this product.
This warranty gives you specific legal rights. You may have other
legal rights that vary from state to state.
For more detail or to obtain service under this warranty, please con-
tact Fellowes Customer Service at 1-800-955-0959, Monday through
Friday, 8 AM - 5 PM (Central Standard Time).
For specific instructions on obtaining service under this warranty on
machines purchased outside the USA, contact the appropriate location
listed in the
Contact for Service
section of this instruction manual.
Warrantor: Fellowes, Inc.
a. Shredder is not plugged in.
b. Power switch is in the
OFF
(O) posi-
tion. Move switch to
AUTO
(I) posi-
tion.
c. Shredder is jammed. See “Clearing
a Jam” section.
d. Shredder has exceeded the maxi-
mum run time and requires a “cool-
down” time. See “Product Usage
Guide”
(page 1).
a. Shredder has exceeded the maxi-
mum run time and requires a “cool-
down” time. See “Product Usage
Guide”
(page 1).
b. Shredder is jammed. See “Clearing
a Jam” in the
OPERATION section.
A small piece of paper may be blocking
the auto-start sensor of this shredder.
Move the power switch to the
OFF
(O)
position and
unplug the shredder
. Turn
shredder over and use a toothpick (
from
the underside of the unit
) to clear the
paper blockage at the auto-start sensor
(center) location .
A small piece of paper may be causing
the auto-start feature to run continuous-
ly. Move the power switch to the
OFF
(O)
position and
unplug the shredde
r. Use
a toothpick (
from the top of the unit
)
to clear the paper blockage at the auto-
start sensor (center) location .
Shredder will not
operate.
Shredder suddenly
stops while shred-
ding.
Shredder operates
only in REVERSE.
Shredder runs contin-
uously when in
AUTO.
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Page is loading ...
Australia Benelux Canada France Germany Italy Japan Poland United Kingdom
T
ullamarine, Vic
Vianen, NL
Markham, Ont.
R
ennes, I-V Garbsen, Han. Camerano, AN Tokyo Warsaw Doncaster, S. Yorks.
®
1789 Norwood Avenue • Itasca, Illinois 60143-1095
630-893-1600
© 2004 Fellowes. Printed in China. Form No. 400845
www.fellowes.com
Contact For Service
Vos Contacts Fellowes
Sus Contactos Fellowes
United States 1-800-945-4545
Canada 1-800-665-4339
Australia 1-800-33-1177
-
1
-
2
-
3
-
4
-
5
-
6
-
7
-
8
-
9
-
10
-
11
-
12
Fellowes P-5M User manual
- Category
- Paper shredders
- Type
- User manual
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
in other languages
- français: Fellowes P-5M Manuel utilisateur
- español: Fellowes P-5M Manual de usuario
Related papers
Other documents
-
ALDI MA 501-I User manual
-
-
Rexel Auto+ 100 User manual
-
MyBinding Stack-and-Shred 80X User manual
-
Swingline Stack-and-Shred 750X User manual
-
MyBinding 1757572 User manual
-
Acco Stack-and-Shred 250X User manual
-
Acco STACK-AND-SHRED 500X User manual
-
Acco STACK-AND-SHRED 100X User manual
-
MyBinding Stack-and-Shred 175X User manual