Panoramic h-line is a modular exhibition stand system designed to be lightweight, portable, and easy to assemble. It is made of aluminum frames and connectors, and can be used to create a variety of display configurations, including straight counters, angled counters, shelving units, and multimedia displays.
The h-line system is compatible with a range of accessories, such as shelves, brochure holders, and hanging rods, which can be used to customize the display to meet specific needs. The system also features a unique "multi-panel" option, which allows for the creation of large, seamless graphics.
Assembly Instructions
MKG_NA-ENG_Instructions_H-line_V16_20170731
But also...
Thank you,
for choosing
‘‘ ’’
3
Finishing Touches 28
Feet
Prole Covers
Shelves 29
Universal attachment piece
Brochure holder 30
Hanging Rod
Free-Standing Shelf 31
LED Lights
Power Supply Attachment 32
Graphics 33
Table of Contents
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
YELLOW
N°
GREY
N°
DARK GREEN
N°
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
Identication of the Crate 4
Assembly Guidelines 5
Smart, optimized storage 6
Module Color-Coding and Chronology (Example) 7
Connecting Frames 8
Standard Lightbox Module 10
Angled Module 11
Closet Module 12
Storage Module (38x38) 13
Storage Module (38x76) 14
Shelving Module 15
Multimedia Module 16
Multimedia Module - Touchpad 17
Arch Module 19
Console Module 21
Header Module 23
Signage Module 25
Counter Module 26
Counter Module (Door) 26
Connection Module 27
4
Identification of the Crate
H3 CRATE CONNECTORS
ACCESSORIES
FURNISHINGS
Use a h-line
connector to
extract the rst
frame.
H5 CRATE
5
1
3
4
52
1
2
Assembly Guidelines
3
1
Do not disassemble the frame
or remove the graphic
Do not place the frame
on the ground graphic
side down
6
Smart, optimized storage
FRAME CONNECTION
19"
19"
9.5"
Some frames are
connected during
shipping
Angled pole
storage
38"
Counter Module
Header Module
Standard Module
19"
Standard Module
9.5"
To disconnect the frames, refer to the corresponding modules
(see table of contents)
Console Module
7
Module Color-Coding and Chronology
(Example)
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
Look at module
colors on your
booth rendering
and refer to the
corresponding pages.
18
17
16
1
2
19
20
21
22
3
4
5
6
15
14
7
8
9
24
25
23
10
11
12
13
Start Here
1. Find the "Start
Here" arrow on your
booth rendering
2. Locate frames in
the crate using the
numbering system
3. Look at the frame's color
4. Locate the page
with the corresponding
color in the
instructions
5. Assemble your
stand following the
chronological order
8
Connecting Frames
3
1
2
Insert
1/4 turn
Lock
Open completely Connector
9
Connecting Lightbox Frames
1
1
3
3
2
2
Insert
Standard frame / lightbox connection
Insert
1/4 turn
1/4 turn
Lock
Lock
Open completely
Open completely
Lightbox / lightbox connection Connector
Connector
10
Standard Lightbox Module
1 Rotate feet 2 Plug
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
11
Angled Module
Angled pole
1 Identify 2 Attach 3 Connect
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
12
Storage Module (38x38) and Closet
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
x8
x2
Open door
Lock door for transport
See storage
accessories (p30)
Black inside
graphics
x2
1 Attach the door 2 Connect the
frames
3 Position shelves 4 Snap prole covers into place
13
Storage Module (38x38) and Closet
1 Attach the door 2 Connect the frames 3 Snap prole covers into place
See storage
accesories (p30)
Black inside
graphics
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
x8
x2
Open door
Lock door for transport
14
Storage Module (38x76)
See storage
accesories (p30)
Black inside
graphics
3 Snap prole covers into place
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
x12
1 Attach the door 2 Connect the frames
x2
Open door
Lock door for transport
15
Shelving Module
1 Rotate feet 2 Insert shelves
3 Adjust level
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
16
Multimedia Module
Location for lock
1 Rotate feet 2 Attach TV 3 Insert lock
x1
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
Push lightly on the
graphic
TV wires
Rear ViewSide View
17
1 Rotate feet 2 Attach cable to frame and feed
through the graphic
3 Insert shelf
1
2
x1
JAUNE
N°
GRIS
N°
VERT FONCE
N°
VIOLET
N°
ORANGE
N°
N° BLEU CLAIR
VERT
N°
ROSE
N°
MARRON
N°
BLEU
N°
Multimedia Module - Touchpad
18
Multimedia Module - Touchpad
4 Fasten tablet holder
to tablet
5 Fasten tablet holder to shelf 6 Adjust the angle
7 Lock the padlocks
1. The pre-set combination
is 0-0-0.
2. Push the button A in the
direction of the arrow.
Hold it until completing
the next step.
3. Turn the Dial B to
your desired personal
combination.
4. Release the Button A.
Now the lock will open at
the desired combination.
Support
the shelf
Ensure it is secure
A
B
x1
JAUNE
N°
GRIS
N°
VERT FONCE
N°
VIOLET
N°
ORANGE
N°
N° BLEU CLAIR
VERT
N°
ROSE
N°
MARRON
N°
BLEU
N°
19
Arch Module 1/2
1 Rotate feet 2 Position yourself where
the canopy will go
3 Place the canopy frame so
that the edge straddles the
vertical panel
x2
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°
20
Arch Module 2/2
Front canopy
attachment
Rear canopy
attachment
4 Connect 5 Position the arch 6 Snap prole covers into place
x4
x2
YELLOW
N°
GREY
N°
DARK GREEN
N°
PURPLE
N°
ORANGE
N°
N° LIGHT BLUE
GREEN
N°
PINK
N°
BROWN
N°
BLUE
N°