Esatto ERU52S User manual

Version

V1.2 0922

Everything you need

for your 52  90cm

Undermount Rngehood

is in this User Mnul

Model/s

ERU52S

ERU90S

User Manual

Welcome

Congrtultions on purchsing your new Rngehood. The Estto brnd is

proudly distributed within Austrli by Residenti Group Pty Ltd.

Plese refer to the wrrnty crd t the rer of this mnul for informtion

regrding your product’s prts nd lbour wrrnty, or visit us online t:

www.residenti.group

At Residenti Group, we re customer obsessed nd our Support Tem re

there to ensure you get the most out of your pplince. Should you wnt to lern

more bout your new rngehood, it's fetures or importntly tking cre of the

pplince, our Support Tem re here to help.

You cn use our online Support Centre t nytime by visiting:

http://support.residentigroup.com.u

Or you cn contct us vi phone by diling: 1300 11 HELP (4357).

It is importnt tht you red through the following use nd cre mnul

thoroughly to fmilirise yourself with the instlltion nd opertion

requirements of your pplince to ensure optimum performnce.

Agin, thnk you for choosing n Estto pplince nd we look forwrd

to being of service to you.

Kind Regrds,

The Residenti Tem

Residenti roup

—

Head Office

165 Brkly Avenue

Burnley, Victori

Austrli 3121

—

ACN

600 546 656

—

Online

residenti.group

www.estto.house

@estto.house

—

Postage

PO Box 5177

Burnley, Victori

Austrli 3121

—

Telephone

1300 11 4357

www.esatto.house

esatto.house

Pge 2

Welcome

Pge 4

Sfety Instructions

Pge 8

Product Overview

Pge 10

Instlltion

Instructions

Pge 13

Opertion

Instructions

Pge 14

Mintennce

 Clening

Pge 16

Troubleshooting

Pge 18

Your Receipt

Contents

Pge 19

Purchse Detils

Pge 20

Wrrnty

User Manual

IMPORTANT SAFETY INSTRUCTIONS

READ CAREFULLY AND KEEP FOR FUTURE

REFERENCE

Red this mnul thoroughly before rst use,

even if you re fmilir with this type of product.

The sfety precutions enclosed herein reduce

the risk of re, electric shock nd injury when

correctly dhered to. Mke sure you understnd

ll instructions nd wrnings.

Keep the mnul in  sfe plce for future

reference, long with the completed wrrnty

crd nd purchse receipt. If you sell or trnsfer

ownership of this product, pss on these

instructions to the new owner.

Alwys follow bsic sfety precutions nd

ccident prevention mesures when using n

electricl pplince. The following sttements you

will see in this booklet hve these menings:

WARNING: Indicting informtion concerning

your personl sfety.

CAUTION: Indicting informtion on how to

void dmging the pplince or cbinetry.

IMPORTANT: Indicting tips nd informtion

bout use of the pplince.

USAGE CONDITIONS AND RESTRICTIONS

• Domestic use only: This pplince is intended

for indoor household use only. It is not intended

for commercil, industril or outdoor use. It is not

intended for use in  recretionl vehicle.

• Purpose: Do not use this pplince for nything

other thn its intended purpose. Other uses re

not recommended nd my cuse re, electric

shock or personl injury.

• Attchments: The use of ttchments is not

recommended by the pplince mnufcturer

nd distributor s they my be hzrdous.

• Improper use: Dmge due to improper use,

or repirs mde by unqulied personnel will

void your wrrnty. We ssume no libility

for ny eventul dmges cused by misuse

of the product or noncomplince with these

instructions.

BEFORE USING YOUR APPLIANCE

This mnul explins the proper use of your new

Estto rngehood. Plese red this mnul crefully

before using the product. This mnul should

be kept in  sfe plce for hndy reference. This

rngehood is  domestic pplince which hs been

mnufctured nd tested to comply with Austrlin

nd New Zelnd Stndrd AS/NZS 60335.2.31.

This rngehood must only be instlled in

ccordnce with the instructions provided. Incorrect

instlltion my cuse hrm to persons, dmge

property nd void the product’s wrrnty.

Red the following crefully to void dmge

or injury.

IMPORTANT: Check for ny dmge or mrks.

If you nd the pplince is dmged or mrked,

you must report it within 7 dys if you wish to clim

for dmge/ mrks under the mnufcturer’s

wrrnty. This does not ect your sttutory rights.

Sfety Instructions

esatto.house

WARNING: Follow these instructions crefully

to void injury, electric shock or re.

• Young children should be supervised to ensure

they do not ply with the rngehood.

• This pplince is not intended for use by persons

(including children) with reduced physicl,

sensory or mentl cpbilities, or lck of

experience nd knowledge, unless they hve

been given supervision or instruction concerning

the use of the pplince by  person responsible

for their sfety.

• Ensure the rngehood is switched o before

crrying out mintennce, to void ny

possibility of electric shock.

• Do not mbé under the rngehood.

• This rngehood is not suitble for use

over brbecues.

• This rngehood cnnot be instlled for externl

use—only to be instlled indoors.

• The rngehood nd lters must be clened

regulrly to keep in good working order.

• The exhust from the rngehood must not be

dischrged into ny heting ue, which my

crry combustion products from other sources.

(Figure 1)

• Exhust ir must not be dischrged into

 wll cvity, unless the cvity is designed

for the purpose.

• There shll be dequte ventiltion of the room

when the rngehood is used t the sme time

s pplinces burning gs or other fuels (not

pplicble tht only dischrge the ir bck into

the room).

• Regultions concerning the dischrge of ir hve

to be fullled.

• There must be dequte ventiltion of the room

when the rngehood is used t the sme time s

pplinces burning gs or other fuels.

• Your new rngehood is gurnteed ginst

electricl or mechnicl defects, subject to

certin exclusions tht re noted in the Wrrnty

Terms nd Conditions (t the rer of this user

mnul). The foregoing does not ect your

sttutory rights.

• Alwys cover lit gs burners with pots or pns

when rngehood is in use.

• Alwys switch o gs burners before you remove

pots or pns.

• Do not leve lit gs burners exposed due to the

risk of re. (Figure 2)

Figure 1

Figure 2

User Manual

Sfety Instructions (Continued)

ELECTRICAL CONNECTION

• Check tht the mins voltge mtches with the

voltge on the dt plte inside the rngehood.

• Check tht the instlltion complies with

stndrds of locl building, gs nd electricl

uthorities.

• Before connecting to the mins supply ensure

tht the mins voltge corresponds to the

voltge on the rting plte inside the rngehood.

• Only plug this unit into  properly erthed outlet.

If in doubt seek dvise from  suitbly qulied

person or service gent.

WARNING: If the supply cord is dmged, it must

be replced by the mnufcturer or its service

gent or similrly qulied person in order to void

 hzrd.

WARNING: All electricl work must be done in

ccordnce with locl nd ntionl electricl codes

s pplicble nd should be undertken

by licenced nd qulied persons only. Filure to

follow these instructions cn result in deth, re or

electricl shock.

SAFETY WARNINGS: FOR THE INSTALLER

When instlling the rngehood, mke sure you

dhere to the minimum nd mximum distnces

from the rngehood bse to the cooktop surfce

(s per tble on pge 10).

Exhaust ue installation:

The following rules must be strictly followed to

obtin optiml ir extrction.

• Keep exhust ue short nd stright.

• Do not reduce the size or restrict exhust ue.

• Keep bends in the exhust ue to  minimum;

the more bends the lower the extrction

performnce.

• When using exible ue lwys instll

duct with helix pulled tut to minimise

pressure loss.

• Filure to observe these bsic instructions will

drsticlly reduce the performnce nd increse

the noise levels of the rngehood.

Exhust ir must not be dischrged into  wll

cvity, unless the cvity is designed for tht

purpose. The exhust from the rngehood

must not be dischrged into ny heting ue, which

my crry combustion products from other sources.

NOTE: Some instlltions my require the

expndble/telescopic ducting to be cut to length.

Cut with shrp tin snips or  ne-tooth hck

sw blde, tking cre not to distort or dent the

exhust cover. Where using expndble ducting,

it’s importnt to hve the ducting fully tught to

mximise eciency of the irow.

Important notice regarding the extraction mode.

WARNING: Risk of poisoning from exhust gses

sucked bck. Never operte the device in extrction

mode simultneously with n open ue pplince

when there is not dequte irow gurnteed.

esatto.house

Open ue combustion equipment (for exmple,

gs, oil, wood or col-red heters, tnkless wter

heters, wter heters) pulls combustion ir from

the room nd runs it through n exhust pipe or

chimney to the outside. In the extrction mode,

indoor ir is removed from the kitchen nd the

djcent rooms — without sucient ir intke this

cretes  vcuum. Toxic gses from the chimney or

extrction ue cn thereby be sucked bck into the

living spces.

• Alwys ensure tht  sucient supply of fresh ir

is gurnteed nd tht the ir cn circulte.

• An ir supply / extrctor box lone does not

ensure complince with the limit vlue.

Sfe opertion is only possible when the negtive

pressure in the room where the pplince is locted

does not exceed 4 P (0.04 mbr). This cn be

chieved when the ir required for combustion cn

ow through openings tht re not closble, for

exmple in doors, windows, in conjunction with n

ir supply / extrctor box or through other technicl

mesures. In ny cse, consult  qulied chimney

sweep who cn ssess the entire ventiltion of

your house nd propose pproprite mesures for

dequte ventiltion.

If the rngehood is used exclusively in the

recircultion mode, unrestricted opertion

is possible.

UNPACKING

During trnsporttion, protective pckging ws

used to protect the pplince ginst ny dmge.

After unpcking, plese dispose of ll elements of

pckging in  wy tht will not cuse dmge to

the environment.

All mterils used for pckging the pplince re

environmentlly friendly; they re 100% recyclble

nd re mrked with the pproprite symbol.

CAUTION: During unpcking, the pckging

mterils (polythene bgs, polystyrene pieces, etc.)

should be kept out of rech of children.

DISASSEMBLY OF THE RANGEHOOD

• To disssemble your rngehood, perform the

instlltion instructions in reverse order.

• Alwys perform disssembly with two people

to void injuries.

DISPOSAL OF THE APPLIANCE

Old pplinces should not simply be disposed

of with norml household wste nd should be

delivered to  collection nd recycling centre for

electric nd electronic equipment. A symbol shown

on the product, the instruction mnul or the

pckging shows tht it is suitble for recycling.

Mterils used inside the pplince re recyclble

nd re lbelled with informtion concerning this.

By recycling mterils or other prts from used

devices you re mking  signicnt contribution

to the protection of our environment.

Informtion on pproprite disposl centres

for used devices cn be provided by your locl

uthority.

TTRROOUUBBLLEESSHHOOOOTTIINNGG

Fault Cause Solution

Light on, but fan does

not work

The fan blade is jammed. Switch of the unit and

repair by qualified

service personnel only.

The motor is damaged.

Both light and fan do

not work

light bulb burn. Replace the bulb

with correct rating.

Power cord looses. Plug in to the power

supply again.

Serious Vibration

of the unit

The fan blade is damaged. Switch of the unit and

repair by qualified

service personnel only.

The fan motor is

not fixed tightly.

The unit is not hung

pro-perly on the

bracket.

Take down the unit and

check whether the bracket

is in proper location.

Suction per-formance

not good

Too long distance

between the unit and

the cooking plane

Readjust the

distance to 65-75cm

HINTS ON DISPOSAL

According to the European waste regulation 2012/19/EU this

symbol on the product or on its packaging indicates that this

product may not be treated as household waste. Instead it

should be taken to the appropriate collection point for the

recycling of electrical and electronic equipment. By ensuring this

product is disposed of correctly, you will help prevent potential

negative consequences for the environment and human health,

which could otherwise be caused by inappropriate waste

handling of this product. For more detailled information about

recycling of this product, please contact your local council or

your household waste disposal service.

Manufacturer

User Manual

Product Overview

YOUR RANGEHOOD

ERU52S ERU90S

Figure 3

Note: The images in this user manual are for reference only. Your appliance may appear dierently.

520

296

254

260

483

900

296

254

260

863

Model/s ERU52S ERU90S

Product Dimensions (W, D, H): 520mm, 296mm, 254mm 900mm, 296mm, 254mm

Cut-out Dimensions (A × B): 490mm × 265mm 867mm × 265mm

Extrction: 500m3/hr 750m3/hr

Weight (Net): 6.11kg 8.26kg

Speed Settings: 3 3

Lighting: 2 × 0.5W LED 2 × 0.5W LED

Aluminium Filters 1 2

Power Supply: 220–240 Volts 50/60Hz 220–240 Volts 50/60Hz

Mx Noise Rting: 59dB(A) 70dB(A)

esatto.house

RANGEHOOD COMPONENTS

Your Estto Undermount Rngehood is supplied with:

• 1 × Rngehood

• 1 × Expndble 150mm pipe

• 1 × One-wy vlve (2pcs)

• 1 × Pcket of screws

• 1 × User Mnul

• 1 × Quick Strt Guide

ADDITIONAL ITEMS REQUIRED FOR INSTALLATION

• Duct tpe or cble ties

• Ducting relevnt to your instlltion requirements

(including ny rigid bends, vents nd/or dpters)

• Drill nd/or screwdriver

• Spirit Level

• Tpe Mesure

• Jigsw

• Ldder

• Pencil

OPTIONAL ACCESSORIES

Residenti Group sell the following optionl ccessories, which cn

be purchsed seprtely by contcting our After Sles Support Tem.

• Crbon Filter

• Vrious ducting solutions (rigid ducting, dpters, vents/outlets nd elbow bends)

User Manual

Instlltion Instructions

WARNING: Before strting the instlltion, plese

refer to the Sfety Informtion section.

• Alwys switch the power o prior to beginning

the instlltion.

• Stinless steel is very esily dmged during

instlltion.

• Wherever possible, protect the rngehood with

the crdbord box or plstic.

• A power point must be locted within 1.5m of

the power cord exit from the rngehood, nd it

should be lwys ccessible to llow isoltion

from power during clening or mintennce.

• A 150mm round ducting dpter is supplied,

however ll other ducting ccessories re not.

• All ducting must comply with building codes nd

locl requirements.

• If you re re-circulting the ir, rther thn

ducting, plese ensure tht the side outlet grilles

re not obstructed in ny wy s this will ect

the eciency of the rngehood.

• Ensure tht the rngehood is mounted in 

level position, both horizontlly nd verticlly.

This is essentil to ensure the rngehood

opertes correctly nd prevents grese build

up t one end.

IMPORTANT: Never use  silicone round

your rngehood or ue pieces. Never instll the

rngehood or ue pieces into the plster ceiling

which prevents esy ccess to the rngehood for

servicing requirements.

IMPORTANT: Before instlling your rngehood,

plese record the detils of your rngehood’s rting

lbel (locted within the rngehood, behind the

luminium grese lters) into the form on pge 19.

This will be helpful should you need to contct our

service tem in the future.

POSITIONING THE RANGEHOOD

NOTE: When the rngehood nd pplince

supplied with energy other thn electricity re

simultneously in opertion, the negtive pressure

in the room must be not exceed 4 P (4 × 10-5 Br).

IMPORTANT: The height of the rngehood

underside must be  minimum of 600mm* to 

mximum 800mm from the top of your cooktop

surfce (for gs cooktops this is the top of the

gs burner).

* If the instlltion instructions for your cooktop

specify  greter distnce thn the minimum, then

tht shll be the minimum height for instlltion.

COOKTOP

FUEL TYPE:

DIMENSION A

Minimum* Mximum

Gs (multiple burners

with mximum 45.4 MJ/h

totl output nd no

single burner exceeding

16.2 MJ/h output)

600mm 800mm

Gs (multiple burners

with totl output greter

thn 45.4 MJ/h but less

thn 77.8 MJ/h, nd no

single burner exceeding

17.3 MJ/h output)

760mm 800mm

Gs (single burner not

exceeding 21.6 MJ/h

output)

650mm 800mm

Gs (single burner with

n output greter

thn 21.6 MJ/h but not

exceeding 29.2 MJ/h)

760mm 800mm

Electric 600mm 800mm

RECIRCULATING INSTALLATION

Before beginning the instlltion of your rngehood,

consider your ducting method.

We recommend ducting your rngehood wherever

possible, for the mximum performnce, however

this rngehood cn be operted in recirculting

mode. You will need to purchse the relevnt

Crbon Filter ccessory which is vilble for

purchse from our After Sles Service Tem.

If you do not hve n outlet to the outside, n

exhust pipe is not required. The rest of the

instlltion method is the sme s Ducted

Instlltion.

DUCTED INSTALLATION

This rngehood hs been supplied with expndble

plstic ducting, however for mximum performnce

we recommend instlling with rigid or semi rigid

ducting. Use cble ties or suitble duct tpe to

secure the exible pipe or ducting to the rngehood

duct outlet.

esatto.house

PRODUCT OVERVIEW

(A) Hood

(B) Frame

Rngehood (A)

Frme (B)

Grese lter (C)

WARNING: All ducting must be re retrdnt.

Depending on your sitution, there re multiple

options for ducting your rngehood, s follows:

• Stright up through your tiled or metl roof,

using  roof cowl (not supplied with the

rngehood).

• Into your ceiling cvity (where complint with

locl nd ntionl building regultions/codes.

Seek pprovl from the relevnt uthority or

building inspector where necessry.

• Into your ceiling cvity nd then vented to the

tmosphere through your eves, using no more

thn 2 × 90 degree bends within the ducting run.

• Through your wll.

IMPORTANT: Ducting cn hve  mjor eect on

your rngehoods performnce. The following tips

outline how to correctly duct your rngehood.

• Alwys use the correct size ducting.

• This rngehood is designed for use with 150mm

ducting to chieve optimum irow performnce

nd minimised noise.

• For mximum performnce use semi rigid

or rigid ducting.

• Alwys use non-mmble ducting

• Alwys duct to the outside tmosphere, unless

your locl building codes nd regultions permit

otherwise.

• Where using exible ducting, lwys instll the

ducting pulled tut to minimize pressure loss,

nd cut ny excess ducting o.

• Where possible, void using 90 degree bends

nd in their plce use multiple 45 degree bends.

• Keep your totl length of ducting to the shortest

length possible.

• Ensure there re no kinks in your ducting.

• Use cylindricl ducting whenever possible.

ELECTRICAL CONNECTION

Check tht the instlltion complies with the

stndrds of locl building, gs nd electricl

uthorities. Before connecting your rngehood to

the mins supply, ensure tht the mins voltge

corresponds to the voltge on the rting plte inside

the rngehood.

Instlltion steps

NOTE: Do not connect the power cble until the

instlltion is complete! Alwys perform instlltion

with two people to void injuries.

The typicl instlltion method for your

undermount rngehood is into  purpose built

overhed/wll cbinet.

1. Remove the metl grese lter (C).

2. Using  jigsw, crete the required cut-out

for your undermount rngehood, s per the

mesures dimensions in the tble on pge 8.

Mke sure the cut-out is t lest 35mm from the

cbinet edge.

3. Drill  hole in the cbinet, which will lter guide

the power cord.

4. Remove the screws on the frme (B) nd unscrew

the two globes. Ensure tht the two clips on

both sides of the rngehood re suitble for the

thickness of the re where the rngehood is

instlled. If this is not the cse, djust the clips

using the screws.

5. Lift the rngehood to the opening in the wll

cbinet, then pss the power cord through the

opening drilled in step 3.

6. Slide the rngehood completely into the opening

in the wll cbinet. If you wnt to connect the

rngehood to  pipe leding outwrds, ttch

the connecting pipe t the top of the round ir

outlet of the rngehood.

7. While one person is holding the rngehood, the

other person tightens the screws through the

holes in the hood frme (A).

8. Then screw the fn frme (B) bck on nd

tighten the two globes.

9. Finlly, reinstll the grese lter.

User Manual

This pge is intentionlly blnk.

But if you wnt to drw something, mke notes or even write

 recipe, it’s ll yours!

esatto.house

Opertion Instructions

CAUTION:

• Do not touch the light for 30 minutes fter using the pplince s it cn be hot.

• Do not cover the globe with therml insultion or other mterils.

CONTROL PANEL

1. Power Button

Press this button to turn o the fn.

2. Low Fn Speed Button

Press this button to extrcting t the lowest speed.

It is suitble for simmering nd cooking without much stem.

3. Medium Fn Speed Button

Press this button to extrcting t  medium speed.

It is suitble for regulr cooking.

4. High Fn Speed Button

Press this button to extrcting t the highest speed.

Use this fn speed for hevy smoke or stem to chieve the mximum exhust eciency.

5. Light Button

Press this button to turn the light on nd o.

1 42 3 5

Note: The images in this user manual are for reference only. Your appliance may appear dierently.

User Manual

PRIOR TO CLEANING YOUR RANGEHOOD

WARNING!

• Be sure to turn o the pplince nd remove the plug before ny mintennce is perform.

• Alwys let the pplince nd its components cool down before clening them.

• Do not use brsive wipes, chemicls or lcohol s these could dmge the surfce.

• Do not clen ny Electricl/Electronic prts .

• Do not use ny crid or corrosive detergents.

• Do not use ny brsive detergents or ny lkline dishwsher detergents!

• Mintennce nd inspection should be undertken on  frequent bsis.

If there is ny visible dmge,  strong odour or excessive overheting of components,

stop using the pplince.

• Clen the pplince in ccordnce with instructions. Filure to do so my result in  risk of re.

RISK OF ELECTRIC SHOCK!

• Do not use  stem clener.

CLEANING OF THE RANGEHOOD

TASK FREQUENCY

Clen the stinless surfce with  soft cloth nd lukewrm

wter. A clening uid suitble for stinless steel my be used.

NOTE: To prevent ny criss-cross scrtches, ensure tht you

wipe long the grin of the stinless steel.

Weekly

Clen the control pnel with  soft cloth nd wrm wter.

Ensure tht the cloth is clen nd is not too wet. Use  dry soft

cloth to remove ny excess moisture.

Weekly

Clening the grese lters Monthly

(See Clening the grese lters

for more detils)

Clening the crbon lter Every 3 to 6 months

(See Instlling nd replcing the crbon

lter for more detils)

Mintennce  Clening

esatto.house

CLEANING THE GREASE FILTERS

1. Remove  grese lter.

Cleaning option #1: Cleaning Manually (max 30°C)

• Sok the lter for bout 3 minutes in wter with  mild non-corrosive grese-removing detergent.

• Wsh the lter seprtely from crockery nd kitchen utensils.

• Brush the lter gently with  soft brush.

NOTE: Do not pply too much pressure to void dmging the lter

• Over time, fding nd discolourtion my hppen.

This is norml nd is not considered  wrrnty issue.

2. Cleaning option #2: Cleaning using the dishwasher (max 30°C)

• Plce the lter in the dishwsher nd run  progrm with  mild non-corrosive grese-removing

detergent. NOTE: It is dvisble not to use rinse ids.

• Wsh the lter seprtely from crockery nd kitchen utensils.

• Brush the lter gently with  soft brush.

NOTE: Do not pply too much pressure to void dmging the lter

• Over time, fding nd discolourtion my hppen.

This is norml nd is not considered  wrrnty issue.

3. Leve the lter to dry nturlly out of direct sunlight.

4. Put the lter bck in its correct position.

INSTALLING AND REPLACING THE CARBON FILTER

The crbon lter is n optionl spre prt vilble to purchse by contcting our After Sles Support Tem.

Do not clen or wsh the crbon lters. If  crbon lter

is used, we recommend replcing the crbon lter every

3 to 6 months.

To instll nd replce the crbon lter:

1. Disconnect the power supply from the wll socket.

2. Remove the grese lter by pressing the lock

nd pulling it downwrd.

3. Instll or replce the crbon lters by plugging them

into the unit nd turning clockwise to securely lock

on ech side.

4. Plce the grese lter bck into position.

5. Reconnect power supply to the wll socket.

NOTE: When  crbon lter is ttched, the extrction power of your rngehood will be lowered.

Installation (Vent inside)

If you do not have an outlet to the outside, exhaust pipe is not required and the

installation is similar to the one show in section “Installation (Vent outside)”.

Installing the Carbon Filter

Note: An activated carbon lter is not included. But you can buy it as an extractor

hood.

1 2

Activated carbon lter can be used to

trap odours.

In order to install the activated carbon

lter, the grease lter should be

detached rst. Press the lock and pull it

downward.

Plug the activated carbon lter into the

unit and turn it in clockwise direction.

Repeat the same on the other side.

Make sure the lter is securely locked.

Otherwise, it would loosen and cause

dangerous. When activated carbon

lter attached, the suction power will

be lower.

User Manual

OPERATION IN CASE OF EMERGENCY

In the event of n emergency you should:

• Switch o ll rngehood controls.

• Switch the rngehood o t the power outlet nd immeditely unplug.

• Cll After Sles Support on 1300 11 4357 or emil support@residentigroup.com.u

Some minor fults cn be ﬁxed by referring to the instructions given in the tble below.

IMPORTANT: If your pplince ppers to be operting incorrectly, then you should disconnect it

from your electricl supply nd then contct After Sles Support.

WARNING: Do not ttempt to repir the rngehood yourself.

Plese note tht if n engineer is sked to ttend whilst the product is under wrrnty nd ﬁnds tht the

problem is not the result of n pplince fult, then you my be lible for the cost of the cll out chrge.

The pplince must be ccessible for the engineer to perform ny necessry repir.

If your pplince is instlled in such  wy tht n engineer is concerned tht dmge will be cused to the

pplince or your kitchen, then they will not complete  repir. This includes situtions where the rngehood

hs been tiled in or seled in with  selnt.

Plese refer to the conditions of tht pper on the wrrnty crd t the rer of this user mnul.

Troubleshooting

esatto.house

FAULT COMMON CAUSE COMMON SOLUTIONS

The lights cn be turned on,

however the motor does not

work

Fn switch is dmged Cll After Sles Support for further

guidnce.

The motor is dmged

Both the light nd motor do

not work

The fuse is dmged Reset or replce the fuse.

The power supply cord is loose

or disconnected

Reconnect the power supply to the

wll socket.

The light is not working The light globes re dmged

or blown

Cll After Sles Support for further

guidnce.

The is insucient suction

power or ir is not extrcted

dequtely.

The distnce between the

rngehood nd the cooktop is

too gret.

Hve your instller re-djust the

instlltion position, ensuring tht

the minimum distnces re observed

s per the building code nd relevnt

stndrds.

Ducting is loose, kinked, too

long or too mny bends.

Check tht your rngehood hs been

ducted correctly nd in ccordnce

with the instlltion instructions.

The rngehood is vibrting

ginst the wll or cbinetry

The rngehood body is not

ﬁxed correctly.

Fix the body tightly nd ensure

ll the instlltion steps re

performed correctly.

The rngehood motor is not

tightly hung.

Lock in the motor tightly.

The fn blower is dmged. Cll After Sles Support for further

guidnce.

User Manual

Attch your receipt

to this pge

esatto.house

Purchse Detils

For your records, plese record detils of your purchse below nd stple your receipt

on the opposite pge. Your seril number cn be found on the rer of your Rngehood.

STORE DETAILS

STORE NAME

ADDRESS

TELEPHONE

PURCHASE DATE

PRODUCT DETAILS

MODEL NO.

SERIAL NO.*

User Manual

WARRANTY TERMS AND CONDITIONS

RANGEHOODS

This document sets out the terms nd conditions of the

product wrrnties for Residenti Group Applinces. It is

n importnt document. Plese keep it with your proof of

purchse documents in  sfe plce for future reference

should you require service for your Applince.

1. IN THIS WARRANTY

() ‘cceptble qulity’ s referred to in cluse 10 of

this wrrnty hs the sme mening referred to in

the ACL;

(b) ‘ACL’ mens Trde Prctices Amendment (Austrlin

Consumer Lw) Act (No.2) 2010;

purchsed by you ccompnied by this document;

(d) ‘ASR’ mens Residenti Group uthorised service

representtive;

(e) ‘Residenti Group’ mens Residenti Group Pty Ltd

of 165 Brkly Ave, Burnley VIC 3121, ACN 600 546

656 in respect of Applinces purchsed in Austrli;

(f ) ‘mjor filure’ s referred to in cluse 10 of this

wrrnty hs the sme mening referred to in the

ACL nd includes  sitution when n Applince

cnnot be repired or it is uneconomic for Residenti

Group, t its discretion, to repir n Applince during

the Wrrnty Period;

(g) ‘Wrrnty Period’ mens:

(i) where the Applince is used for personl,

domestic or household use (i.e. norml

single fmily use) s set out in the instruction

mnul, the Applince is wrrnted ginst

mnufcturing defects for 24 months, following

the dte of originl purchse of the Applince;

(h) ‘you’ mens the purchser of the Applince not

hving purchsed the Applince for re-sle, nd

‘your’ hs  corresponding mening.

2. This wrrnty only pplies to Applinces purchsed

nd used in Austrli nd is in ddition to (nd does

not exclude, restrict, or modify in ny wy) ny

non-excludble sttutory wrrnties in Austrli.

3. During the Wrrnty Period Residenti Group or

its ASR will, t no extr chrge if your Applince

is redily ccessible for service, without specil

equipment nd subject to these terms nd conditions,

repir or replce ny prts which it considers to

be defective. Residenti Group or its ASR my use

remnufctured prts to repir your Applince. You

gree tht ny replced Applinces or prts become

the property of Residenti Group. This wrrnty does

not pply to light globes, btteries, lters, sels or

similr perishble prts.

4. Prts nd Applinces not supplied by Residenti

Group re not covered by this wrrnty.

Wrrnty

— THIS WARRANTY IS VALID IN AUSTRALIA ONLY —

Esatto ERU52S User manual

Related papers

Other documents