Akura AKDVB705B User manual

Operation Instructions

Digital LCD Color TV Receiver

Table of Contents

1.Precautions

2.Accessories

3.Appearance

4.Remote Control Application

5.Basic Operation Methods

6.DVB-T Menu Operation

6.1.Auto installation

6.2.Installation setup

6.3.Program receive and shift

6.4.Program search function

6.5.Main menu option

6.6.Parental control

6.7.System setup option

6.8.

6.9.Game menu option

6.10.DIY menu setting

6.11.Error message

6.12.Menu Analog quantity

6.13.Off-time setting

7.ATV Menu Operation

8.In Order to Receive clearer picture

9.Before you request for repair

10.Technical parameters

Accessory Setting

1

3

4

5

8

10

14

17

19

21

24

26

32

34

35

37

38

39

40

45

46

47

1. Precautions

Storage and Keeping

Maintenance

Please plug off all connection wires before you start cleaning this machine.

Keep this machine

away from too hot

or too cold places.

The storage

temperature of this

machine is -20~

60 , the

application

temperature of this

machine is 5~35 .

Never use this

machine near

bathtub,

washbasin, and

kitchen, etc places

with water or at

damp basement,

swimming pool or

similar places.

Never make the

TV set under

effect of moisture,

dust or oil smoke

etc. environment.

Avoid this

machine from

dropping or

impacting.

Never extrude

or chafe this

machine with

sharp objects.

Never put this

machine within

certain box at

your will or place

it at too-

oscillating place

and under further

severe collision.

Please wipe the

machine cover,

display screen

and buttons with

soft cloth

dipped with

little soft

abluent.

Never wipe this

machine with

abrasion cloth,

abstergent

powder, alcohol

and benzene etc.

various

propellants or

chemical

cleaning media.

Alcohol

Special Notice

!

Warning!

1. For the sake of safety for yourself and others, please do not watch

or turn on the TV set while driving.

2. It is very dangerous to watch or operate TV while driving.

A few highlights or dark spots may occur on the LCD screen. It is a very

common phenomenon of the active matrix display technology, and does

not mean any defects or faults. Never try to repair this machine by yourself.

In case of any fault or failure, please turn off the display at once, and notify

our Company or the corresponding dealer. The display is made up of many

precision electronic components. Any disassembly or modification may lead

to further damage.

1.Only the attached AC adapter and the automobile adapter (12V) are suitable.

2.For the sake of safety, when you do not intend to use the display, please

unplug the AC adapter or automobile adapter.

Operation Precautions

1.Please don't tune your headphone / earphone at too high volume, otherwise,

it may lead inconvenience and danger to yourself and other people.

2.For open-designed earphone, to avoid influencing your periphery, please

tune down the volume.

3.In case of any tinnitus, please tune down the volume or stop using this

machine.

4.It is recommended by the aurists that the earphone should not be

continuously used for a prolong period.

Earphone Operation Precautions

2. Accessories

AV in/out

cord

AC adapter

Digital

TV antenna

AAA type

batteries

Remote

control

Car adapter

Base support

Double-side

adhesive tape

for base support

13

14

15

16

17

18

19

1

4

10

3

11

12

5 6 7 8

2

9

3. Appearance

1.Remote receiving window

2.Menu

3.Confirm OK (DTV mode)/

Auto search (TV mode)

4.Volume - /Leftward

5.Volume+/Rightward

6.Channel - /Downward

7.Channel+ /Upward

8.Power indicator

9. ON/OFF

DVB/ATV/AV

Press and hold for 3 seconds

to turn off TV set

10.Telescopic antenna

11.TFT-LCD screent

12.Base support

13.Stereo Earphone jack

14.DVB-T AV Output jack

15.AV Input jack

16.12V DC Input jack

17.Loudspeaker

18.Antenna input jack

19.Antenna output jack

Shift

4. Remote Control Operation

Power on/off /Standby

Auto Search/

Auto adjust

Add the current program

to My Favourite Channel

Enter Game menu

Program Edit Table

Turn on Teletext

Display Electronic

Program Guide

Mute

Volume Adjust

/CH+ -/Direction

Main Menu

Input numbers/

Channel keys

Output Video Signal

PAL/NTSC Select

Analog quantity adjust

OSD Language

Select

My Favourite

Channel on/off

Nine Picture Guide

Information

Display

Return to Last

Program/Menu(Exit)

DVB Confirm

L/R Sound Output

Shift

Pause

DVB Music Shift

Sleep timer/

Clock setup

DVB/ATV/AV

Shift

Return to the

previous program

Picture Mode

Caution

1.Please align the remote control with the infrared-receiving window on TV set in

operation.

2.Never oppress, drop, wet or disassemble the remote control.

3.Never press any button continuously and swiftly. Operation interval is at least 2 seconds.

4.Press Power to turn on the TV before pressing CH+, CH- for channel selection.

5.If the remote control were not to be used for a long time, please remove batteries.

Channel keys (digit keys (0-9) and - / - - ): There are 0 ~ 255 in total of 256

channels available on the remote control for your option by the 11 buttons

of 0-9 and - / - - on the remote control. When the channel is a one-digit

figure, just press the corresponding digit key. If the channel is a tw o-di git

figure, you should press - / - - first to show - - on the display screen before

further pressing the corresponding digit keys. (ATV mode only)

POWER (Power On / Off):

Press this button to turn off the TV , press it again to turn on the TV.

LANG:

Press this button to realize the switch of German, French, Dutch, English,

Spanish, Portuguese and Italian OSD menu language(Under DVB mode,

volume OSD language English).

SEARCH: (Auto adjust)

a. Start Auto search in DVB mode.

b. Press and hold for 5 seconds to realize auto search in ATV mode.

MEMORY: Add the current program to my favourite program(DVB mode only)

Press this button to add the current program to My favourite channel list.

FAVORITE PR: My Favourite Channel option on/off (DVB mode only).

GAME: Press this button to enter the game menu(DVB mode only).

TELETEXT: Turn on the teletext option to watch teletext information

(DVB mode only).

GUIDE: Enter nine picture guide function (DVB mode only).

PRLIST: Enter the Program Edit List function (DVB mode only).

EPG: Press this button to display (DVB mode only) Electronic Program Guide .

INFO: Press this button to display the information of current program.

MENU: Press this button to display the main menu.(Press MENU to select

analog level when using AV function.)

EXIT: Return to last program or menu.

CH / (Channel select):

Press CH ,the number of TV channel increases.

Press CH , the number of TV channel decreases.

VOL-/+ (Volume adjust):

Press VOL-, the volume of TV set decreases.

Press VOL+, the volume of TV set increases.

OK: Confirm key (DVB mode only).

MUTE (Mute):Press this button, the sound will disappear. Press it again or

pressVOL+ to resume the normal sound.

AUDIO: Press this button to realize the switch of L/R sound output .

0,1,2,3,...,9: Channel keys: Press to chose the corresponding channel.

Pause (DVB mode only): Press it to pause the picture or sound.

TV/RADIO: Shift between TV and Radio (DVB mode only).

Sleep: Off-time setup. You can set Sleep Timer to automatically turn off

the TV set within 120 minutes.

P/N(-/--)

switch

(in DVB mode)

:

a. Press this button to to color system of output video signal

.

b. Press this button to select channels in ATV mode. Press the button, then

press 0-9 digital keys to chose a two-digit or three- digit channel.

Return: Press this button to return to the previous channel. Press it again

to return to the current channel.

DVB/ATV/AV shift: Press this button to shift between Digital TV,

analogue TV and Vedio/Audio(AV).

+/-: Bright, contrast. Color, and TINT analog quantity adjust.(Only DVB mode)

Press Mode, then press +/- to adjust the analog quantity of bright, contrast ,

color or TINT.

Mode:(Picture mode)

a. In DVB mode, press this button to select the items between bright, contrast,

color and TINT. Then press +/- to adjust the analog quantity of the chosen

item .

b. In ATV mode, press this button to realize the five picture modes: Standard,

Soft, Vivid, Light and Personal.

c. In AV mode, this button has no use. To adjust the picture mode, please use

Menu button.

5. Basic Operation Methods

Basic interface connection

5.1.Connection of Power Supply:

Align the power supply plug on AC

adapter with the jack on the machine

cover marked with DC12V.

5.2.Connection of External Antenna:

Unplug the telescopic antenna plug,

then plug the attached antenna plug into

the antenna jack on the TV set

If the earphone is applied, the sound only transmits through the earphone,

and no sound is available from the loudspeaker of the TV set.

Notice

5.4.Connection of Stereo Earphone:

Align the earphone plug with the

earphone jack on the TV set, and

just plug in .

5.3.Connection of Telescopic Antenna:

Align the telescopic antenna plug with

the antenna jack on the TV set, and

just plug in .

5.5.Connection of AV Input

Just insert the plug of the external

video cord into the yellow port of the

AV exchange head and the audio left

track plug into the white port and

audio right track plug into the red port.

Then insert the AV head into AV/IN

jack of the TV set.

1 2 3 4 5 6 7 8 9

5.6.Connection of AV Output

Connect the yellow port of the AV

output head to video jack, the white

port to the audio left track plug, the

red port to the audio right track plug.

Then insert the AV head into the

AV/OUT jack.

1.The AV output function is available when using DVB function only.

2.OSD language is locked as English when using AV function.

Notice

The OK/Auto key on panel is available as confirm OK only when DVB function

is operating. In ATV mode, press and hold for 5 seconds to realize auto search; In

AV mode, this key does not work.

Basic operation methods of TV set

1. Connect with power supply and press the power key. In normal status, the

power light is green. If the light is red, press the Power key to turn on the

TV set.

2. Pull out the telescopic antenna.

3. Press CH-/CH+ to choose the desired channel.

4. Adjust the sound volume of the TV set.

Notice

6.Change in the order of 3, 2, 1, …

7.Change in the order of 1, 2, 3, …

8.Power indicator

9. ON/OFF

DVB/ATV/AV

Press and hold for 3 seconds

to turn off TV set

1.Remote receiving window

2.Menu

3.

4.Volume decreases

5.Volume increases

DVB Confirm OK key/ATV Auto Search

Shift

6. Menu Operation

6.1. DVB-T TV receiver automatic installation

First Time Installation.

(The Program table does not exist.)

Press VOL+/VOL- to move the cursor

to YES or No . Press OK key to confirm.

YES: Start First Time Installation.

NO: Cancel First Time Installation.

Press VOL+ or VOL- o

to select Country at

the standard of local TV system.

Press CH+ or CH- on the remote

control to move the cursor to made

other selection.

key n the

remote control

key

Cancel first time installation

Select country

(Receiving the local system)

The system will automatically start

the First Time Installation when the

TV is turned on . Please set up the

installation as illustrated. The system

may not start the First Time

Installation at status as below:

1.The First Time installation has been

set before.

2.The Program table is not empty.

If you want to start the First Time

Installation again, please do as below:

1.Delete all channels in the program list.

2.Set Factory Default at additional option

setting.

Notice:

You need to enter PIN number, to delete

all programs to enter search or start the

first time installation while parental

control lock is in ON status. But in OFF

status, no PIN is required. After returning

to the factory default, the parental lock is

set in OFF status.

Select language menu

Press VOL+/VOL- to select language

menu.

Press CH+ or CH- to move the cursor

to other items.

Set time zone

Press VOL+/VOL- to set local time

zone. Press CH+ or CH- to move the

cursor to set other items.

Press VOL+/VOL- to move the cursor

to BACK or NEXT item. Press OK

key to confirm.

BACK: Skip to the last menu page.

NEXT: Skip to the next menu page.

Skip to the next menu page

Start program auto search Step 1

Press VOL+/VOL- key to move the

cursor to BACK , YES or NO item,

Press OK key to confirm.

BACK: Skip to the last menu page.

YES: Delete program list and start

Auto Search.

NO: Cancel Auto Search and return

to the main menu.

Step 2

Auto searching......

Notice:

During auto searching, do not press any

key on the remote control or panel.

Otherwise it may interrupt the search

progress.

Step 3

Auto searching......

The program list display.

Step 4

Step 5

Auto Search has been finished.

Data saving...

Auto Search has been finished.

Press CH+/CH- to watch the program.

6.2.Installation Setup

Please follow the steps below to

set up:

Step 1

Step 2

1.Press MENU key to display Main Menu.

2.Press CH+ or CH- key to move the

cursor to select System Setting sub-menu.

3.Press OK key to enter System Setting

menu.

4.

Press CH+ or CH- key to move the

cursor to select Regional Setting menu.

5.Press OK button to confirm.

6.Press CH+ or CH- key to move the

cursor to select Country item.

7.Press VOL+ or VOL- key to set

the located Country.

8.After setting, press EXIT key twice to

return to Main Menu.

Step 3

Step 4

Step 5

Step 6

Step 7

9.Press CH+ or CH- key to move the

cursor to select Program Search item.

10.Press VOL+ key to enter the program

search menu.

11.Press CH+ or CH- key to move the

cursor to select Automatic Search item.

12.Press OK key to continue the next step.

Manual search can be used to search

the certain frequency which is existent.

It is suitable for professionals to operate.

13.Press VOL+/VOL- key to move the

cursor to select OK item, then press

OK key to continue next step.

14.Press VOL+/VOL- key to move the

cursor to select YES or NO item. Press

OK key to start Auto Search.

YES: Delete channel list and start auto

search.

NO: Keep channel list and start auto

search.

Step 8

Step 9

Step 10

Step 11

16.Auto searching......

The channel list display.

17.Auto Search has been finished.

Data saving......

18.Auto Search has been finished.

Press CH+/CH- to watch the TV

program.

15.Auto searching......

6.3.Program receive and shift

Program preview

After finishing auto search, you can

enjoy watching high quality TV programs.

Press OK key , and program preview

picture will be displayed as illustrated.

Press CH+ or CH- key to move the cursor

to select channels in the Program list.

Press OK button to confirm.

Input the channel number on the remote

control

You can input the channel number on

the remote control to select your desired

programs.

Press OK to confirm.

Nine Pictures Guide

This DVB-T TV set provides Nine

Picture Guide function. Press GUIDE

key to start the function and press

CH+/CH- or VOL+/VOL- key to move

the cursor to select program image.

Press OK button to confirm.

Teletext Display

This DVB-T TV set supports Teletext

Display. Press Teletext key to start the

function.

Press CH+/CH- key or input the page

number on the remote control to change

display pages.

Press EXIT key to return to normal

playback.

To display Teletext, the program signal

must contain teletext data.

Electronic Program Guide

This digital TV set supports Electronic

Program Guide (EPG) function. Press

EPG key to start the function.

To run EPG, the program signal must

contain EPG data.

EPG Time Table

Press VOL+ key to enter EPG Time Table.

You can browse the program guide of that

day. Press VOL+ key to move the cursor

to choose the program items.

Press EXIT button to return to the

previous page.

Program details

While program items list is displayed ,

press OK key to browse the program

details.

Press EXIT key several times to return to

normal playback.

Press EXIT key to return to the previous

page.

Page is loading ...

Akura AKDVB705B User manual

This manual is also suitable for

Akura AKDVB705B User manual

Related papers

Other documents