User Manual
Gaming Case
Table of Contents
Thank you for purchasing a Rosewill Computer Case
Please read the instruction manual before using and
retain it for future reference.
1
• Product Overview
Disassembly ...................................................... 02
Accessory Box ................................................... 03
• Installation Guide
1. Open the Unit ................................................ 04
2. Install the Power Supply ................................ 04
3. Install Motherboard ........................................ 05
4. Install Add-on Card ........................................ 06
5. Install 3.5”/2.5” HDD/SSD ............................. 07
6. Care ............................................................... 09
7. Options .......................................................... 10
• Specications Table ........................................... 11
Front I/O Cable Pinout ....................................... 12
Front I/O ............................................................. 12
2
User Manual
PRISM T500
Gaming Case
Product Overview
Disassembly Chart (components vary by country)
Front View Right Side View
210 mm
465 mm
440 mm
Dimensions: 210 x 465 x 440 mm
HDD Tray
Dust Filter
Right Side Panel
Front Panel
Left Side Panel
Dust Filter
3
User ManualPRISM T500
Gaming Case
Accessory Box
Image Part Name Qty Function/Component
Screw-A (6-32 x 6mm) 6 PSU
Screw-B (6-32 x 5mm) 8 3.5” HDD
Screw-C (M3 x 5mm) 16 Motherboard
Standoff 3
Motherboard
Screw-D(6-32 x 30 mm)
4 Fan
Cable Tie 5 Cable Management
Cable Buckle 3 Cable Management
Micro Fiber Towel 1 Tempered Glass Cleaning
4
User Manual
PRISM T500
Gaming Case
Installation Guide
1. Open the Unit
1-1. Remove the thumbscrews and take off panel R and L (Figure 1).
Be careful not to misplace rubber grommets.
1
2
2. Install Power Supply
2-1. Set the power supply unit (PSU) at the bottom of the case and secure with Screw-A (Figure 2).
5
User ManualPRISM T500
Gaming Case
3. Install Motherboard
3-1. Secure the motherboard down onto the pre-installed standoff with Screw-C (Figure 3).
3
6
User Manual
PRISM T500
Gaming Case
4. Install Add-on Card
4-1. Loosen the screws to open the slot cover, then secure the add-on card with screws (Figure 4).
4
7
User ManualPRISM T500
Gaming Case
5. Install 3.5”/2.5” HDD/SSD
3.5” Drive Installation:
5-1. Take out the HDD trays from the cage (Figure 5a).
5c
5b
5-2. Install the HDD on to the trays, then insert the trays back into cage (Figure 5b/5c).
5a
8
User Manual
PRISM T500
Gaming Case
5d
5f
2.5” Drive Installation:
5-3. Loosen the screw to release the SSD plate from the back of chassis (Figure 5d).
5-4. Screw down SSD onto the plate and secure the plate back onto the chassis with screw
(Figure 5e).
5e
5-5. Alternatively, you can install the SSD in the location indicated below (Figure 5f).
9
User ManualPRISM T500
Gaming Case
6a
6-2. Clean the dust lters on top/bottom regularly to ensure adequate airow (Figure 6b).
6. Care
To prevent damage, keep all panels closed and secured.
6-1. Put the side panels back in place and secure with thumbscrews (Figure 6a).
6b
10
User Manual
PRISM T500
Gaming Case
7. Options
7-1. LED Light Mode
Press the LED light button briey to switch between color modes:
Red >
Green > Blue > Purple > Cyan > Lime > White > RGB 1 (seven-color-breathing)
> RGB 2 (seven-color-blinking) > Off
7-2. Liquid Cooling Radiator Installation
PRISM T500 supports 240 mm long liquid-cooling radiator in the front of chassis (Figure 7).
7
11
User ManualPRISM T500
Gaming Case
Specifications Table
Model
Name PRISM T500
Specs
Type ATX Mid Tower
Color Black
Case Material Steel/Plastic/Tempered Glass
With Power Supply No
Power Supply Mounted Bottom
Motherboard Compatibility ATX, Micro ATX, Mini-ITX
With Side Panel Window Yes/Tempered Glass Side Panel
Expansion
External 5.25" Drive Bays 0
Internal 3.5" Drive Bays 2 (0)
Internal 2.5" Drive Bays 3 (5)
Expansion Slots 7
I/O Ports
Front Ports
2 x USB 3.0
1 x USB 2.0
Audio In/Out
LED Light Control
Cooling System
120 mm Fans
3 x Front RGB LED (pre-installed)
1 x Rear RGB LED (pre-installed)
2 x Top (optional)
Physical Specs
Dimensions 8.26” x 18.31” x 17.32” (W x H x D)
Weight 19.4 lbs
12
User Manual
PRISM T500
Gaming Case
Front I/O Cable Pinout
Front I/O
Features
• Tempered Glass Front Panel and Side Panels
• I/O Ports: 2 x USB 3.0, 1 x USB 2.0, HD Audio In/Out, LED Light Control
• Pre-Installed 4 x 120 mm RGB LED Fans
• Supports up to 3 x 120 mm Fans/240 mm Water-Cooling Radiator in the Front, 2 x 120 mm Fans
on Top, 1 x 120 mm Fan in the Rear
• Supports up to 150 mm Tall CPU Cooler
• Supports up to 370 mm Graphics Card
• Top and Bottom Dust Filter
NOTICE: Please make sure your motherboard is equipped with on-board USB 3.0 socket before
purchasing.
USB 3.0 CONNECTOR USB 2.0 CONNECTOR HD AUDIO CONNECTOR
USB 3.0
USB 2.0
Mic.
Speaker
Power Light
HDD Light
Reset
Power
LED Switch
PRISM T500_B
Technical Support Information
[email protected] 1-800-575-9885
----------------------------------------------------------------------------------
Thank you for purchasing a quality Rosewill product.
Please register your product at www.rosewill.com
for complete warranty information and support for your product.
/
