August Dual Bluetooth Transmitter User manual

Dual Bluetooth Transmitter
August
Brand
August
Model
Dual Bluetooth Transmitter
Type
User manual

This manual is also suitable for

August Dual Bluetooth Transmitter is a compact and versatile device that allows you to wirelessly connect two Bluetooth audio devices to your TV, computer, or other audio source. With support for aptX, aptX-LL, aptX-HD, and SBC codecs, the transmitter ensures high-quality audio transmission with low latency. It features a long battery life of up to 15 hours, making it ideal for extended use. The transmitter also has a built-in microphone for hands-free calling and a clear LED indicator for easy status monitoring.

August Dual Bluetooth Transmitter is a compact and versatile device that allows you to wirelessly connect two Bluetooth audio devices to your TV, computer, or other audio source. With support for aptX, aptX-LL, aptX-HD, and SBC codecs, the transmitter ensures high-quality audio transmission with low latency. It features a long battery life of up to 15 hours, making it ideal for extended use. The transmitter also has a built-in microphone for hands-free calling and a clear LED indicator for easy status monitoring.

MR270-HD
User Manual
Thank you for purchasing the August MR270-HD Dual
Channel Bluetooth Transmitter.This
MR270-HD
(1) When connecting two devices to the MR270-HD
at the same time, the device will support aptX.
(2) Due to the LED used, the constant yellow light
may be mistaken for green.
Status LED
Indication
Constant White
Searching for Paired
Devices to Connect to
Flashing Blue Quickly
Constant Blue
Constant Green
Constant Yellow
Constant Red
Flashing White
Pairing
Paired with SBC Codec
Paired with aptX Codec
Paired with aptX-LL Codec
Paired with aptX-HD Codec
Low Battery
MR270-HD
MR270-HD
MR270-HD
5.2.1 Connecting a Device
1. Press button I or button II to enter paring mode. In
paring mode the status LED will flash blue quickly.
2. Enable Bluetooth on the receiving device and enter
pairing mode (see the device’s user manual for more
information).
3. The MR270-HD will connect automatically to the
receiving device. Once successfully paired, status
LED I or II will light blue, green, yellow or red constantly
mode (see 4.1 Status LED Meaning for more information).
5.2.2 Clearing Bluetooth Connections Press and hold
button II for 5 seconds to clear all paired devices
from the MR270-HD.
6. Charging and Power Saving
6.1 Charging the Device
The status LEDs will flash white when the battery is low.
To recharge, connect the MR270-HD to a power USB port
using the provided USB power cable.
Whilst charging, the charging LED will light red and turn
green once the battery is fully charged.
A full charge takes approximatively 1.5 hours depending
on power input.
Note：When powered by a USB cable the MR270-HD will
switch on automatically.
MR270-HD
Bluetooth Version
Bluetooth v5.0 with SBC,
aptX, aptX-LL, aptX-HD
Bluetooth Profile
Operating Range
Power Input
Internal Battery
Working Time
Charging Time
Dimension
Weight
A2DP,AVRCP,PBAP
Up to 10m
DC 5V/300mA
400mAh Li-polymer battery
Approx 15 hours
Approx 1.5 hours
52×40×18mm
30g
7. Enable / disable aptX
8
If your headphones don’t support aptX, please switch Enable/
Disable button on MR270-HD.
Remove the USB cable, turn on the device, press Button Ⅰ
for 10 seconds to switch between Enable/Disable:
1. When aptX is enabled, press Button Ⅰ for 10 seconds to
disable aptX, the white indicator light turns off.
2. When aptx is disabled, press Button Ⅰ for 10 seconds to enable
aptX, the white indicator light will flash three times then turn off.
After aptX switch, press power button twice to turn on device.
Problems
Possible Causes and Solutions
Unable to switch
on
Fully charge the MR270-HD
Turn on power switch
Confirm that the MR270-HD is
in pairing mode.
Confirm that the MR270-HD is
within 10m of the audio device.
Press and hold button II for 5
seconds to reset the Bluetooth
connection
Unabletopair
Bluetoothaudio
device
There is no
sound from my
Bluetooth audio
device
Make sure the Bluetooth audio
device is connecting to the
MR270-HD via Bluetooth.
Make sure the cable is connected
between your source device and
the MR270-HD.
Check the volume on both source
device and your Bluetooth audio
device.
9
10
  • Page 1 1
  • Page 2 2
  • Page 3 3
  • Page 4 4
  • Page 5 5
  • Page 6 6

August Dual Bluetooth Transmitter User manual

Dual Bluetooth Transmitter
August
Brand
August
Model
Dual Bluetooth Transmitter
Type
User manual
This manual is also suitable for

August Dual Bluetooth Transmitter is a compact and versatile device that allows you to wirelessly connect two Bluetooth audio devices to your TV, computer, or other audio source. With support for aptX, aptX-LL, aptX-HD, and SBC codecs, the transmitter ensures high-quality audio transmission with low latency. It features a long battery life of up to 15 hours, making it ideal for extended use. The transmitter also has a built-in microphone for hands-free calling and a clear LED indicator for easy status monitoring.

Download PDF
report

Ask a question and I''ll find the answer in the document

Finding information in a document is now easier with AI

Related papers

Other documents