Bauknecht TRAE 6569 Program Chart

Brand: Bauknecht

Model: TRAE 6569

Category: Tumble dryers

Type: Program Chart

Bauknecht TRAE 6569 is a condensing tumble dryer with a variety of features to help you dry your clothes quickly and efficiently. It has a large 8kg drum, so you can dry a large load of laundry in one go. The dryer also has a number of drying programs to choose from, so you can select the right program for the type of fabric you are drying. Additionally, the dryer has a number of options to choose from, such as a delay start option and an anti-crease option.

5019 407 00091

Very

Wet

Load

Wet

Load

Fabric Drying

Cycles

& Drying

levels

Drying options

Buzzer & Anti-Crease

cannot be selected

together

Gentle

Reduces drying

intensity

(recommended

for delicate

items)

Dryness

Adjustment

(Adjusts

Dryness Level

according to

wishes)

Buzzer

Signals/

Sounds end

of drying

cycle at

Intervals

Anti-Crease

Prevents

laundry

from

creasing

Start Delay

Delays the

drying

cycle start

Indicative

drying

times

(in minutes)

85’

120’

70’

100’

3.0

5.0

Cotton

max 5 kg

Cupboard dry +

65’

90’

50’

75’

3.0

5.0

Cupboard dry *

55’

75’

40’

65’

3.0

5.0

Iron dry *

20’

35’

15’

30’

1.0

2.5

Synthetics

max 2.5 kg

Cupboard dry *

15’

30’

10’

25’

1.0

2.5

Iron dry

30’ 20’ 1.5

Delicate

max 1.5 kg

Especially for delicate items

(e.g. shirts).

-- -

---

Airing

Laundry is aired and refreshed

for 30 minutes without heating.

---

Completes drying or dries

single items (suitable for all

fabrics).

Flusensieb reinigen

Startvorwahl h. Schonen Trocknen

Bügel-

trocken Abkühlen

Knitter

schutz

Schrank-

trocken

Extra-

trocken Ende

Summer

Koch-Buntwäsche

Pflegeleicht

Länger

QUICK REFERENCE

GUIDE

Please also carefully read

the “Instructions for Use”.

TRAE 6569

Cotton

Synthetics

Delicate

Airing

Time

* Test programmes according IEC 61121.

Start

Pause

Starts the drying cycle. The Start/Pause

indicator lamp is blinking during the

selection phase.

Press to confirm the final selection.

Programme

selection

Turn the programme selector knob to

the desired programme. The indicator

next to the programme name lights up.

The start indicator blinks to show, that

the dryer is in selection mode. After

the Start / Pause button is pressed the

start indicator lamp lights up and the

programme starts.

Start delay

Delays the drying cycle start from

1 up to 12 hours.

To select the start delay turn the

programme selector knob to the desired

programme, select the desired options

and press the start delay button. With

each touch of the start delay button,

drying cycle start is delayed by one hour.

Press the Start/Pause button to confirm

your final selection. Start delay indicator

blinks and the count-down is running by

reducing the time in one hour steps. The

count-down is indicated by the blinking

of the start-delay indicator located

above the button. During count-down

the drum will turn from time to time to

redistribute the laundry. The pump may

be heard working for a short time.

To cancel or to change the previously

set time turn programme selector knob

to “0” or open the door.

Remaining time

indication

After cycle start a default drying time is

indicated depending on the selected

drying programme and the dryness

adjustment. After several minutes the

time will be adjusted to the real expected

remaining time, depending on size, type

and humidity of the load.

Dryness

Adjustment

Dryness adjustment is an option to

adjust the dryness of the laundry

according to your wishes. Select the

desired programme and the option

dryness level adjustment by pressing

the button “

“ for more dry or the

button “

–

“ for more humid. The

selected dryness will be stored as a pre-

setting to the selected drying

programme. Using the drying

programme next time the pre-setting

appears. By pressing the dryness

adjustment buttons ‘+’ or ‘–‘ the pre-

setting can be changed.

Filter

The indicator lamp lights up when the

filter needs cleaning.

Clean the filter

at the end of every cycle.

PROGRAMME SEQUENCE INDICATION

The programme sequence is indicated by lamps, switching

on when programme step starts and and switching off

when the programme step is passed.

5019 407 00091

1. Check that all fastenings are closed and

that pockets are empty.

2. Turn the articles inside out.

3. Place laundry loosely in the drum to make

sure it doesn’t become tangled.

Sort laundry as follows:

A) By care symbols

(on the collar or inside seam):

Suitable for tumble drying

Tumble drying with reduced

drying intensity only. Press gentle

button

Do not tumble dry

B) By amount and thickness/weight

Whenever the load to be dried exceeds

dryer capacity, separate laundry

according to weight (e.g. towels from

thin underwear).

C) By type of fabrics

Cotton/linen

: towels, cotton jersey, bed

and table linen made of cotton or linen.

Synthetics/Easy Care

: blouses, shirts,

overalls, etc. made of polyester or

polyamide, as well as cotton/synthetic

mixes.

D) By drying level

• Sort into: iron dry, cupboard dry, etc.

Do not tumble dry:

woollens, silk, nylon

stockings, delicate embroidery, fabrics with

metallic decorations, bulky items such as

sleeping bags, etc.

Important: only use specific indicated

dryer-safe additives

and rinse items that

have been treated with stain remover

thoroughly in plenty of water before drying.

Only use specific indicated dryer-safe

plastic items

and

never

dry rubber or

articles contaminated with vegetable oil in

the dr

yer

(Option only available when

Programme is selected).

Push the button to turn the drum light on for

30 sec. and push again to turn the drum light

off.

Programme and Options:

• To select a programme, turn the

programme selector knob. The Start/Pause

indicator lamp is blinking, indicating that

the cycle needs to be started.

• To select an option, press the

corresponding button. The indicator

lamp above the button confirms that a

selection has been made.

• Press the button again to cancel the

option.

1. Having selected the desired programme

and options, press the Start button.

If the laundry is not removed at the end

of the drying cycle, an automatic anti-

crease cycle will operate for maximum 60

min. The drum rotates at regular

intervals, preventing the laundry from

creasing.

Anti-Crease protection re-

distributes laundry in the drum.

When the Anti-Crease option is selected

and laundry has not been taken out, an

anti-crease cycle is activated for 12 hrs.

2. On completion of the programme, set the

programme selector knob to position

“0”

When changing the programme during the

drying cycle, the dryer stops. The Start/Pause

indicator lamp is blinking.

To operate the new programme, press the

Start/Pause button again.

To interrupt the dryer during

operation

1. Set the programme selector knob to

Airing.

2. Press the Start button.

Wait at least 5 minutes before opening

the door to allow the dryer to cool

down.

For your safety the programme stops

automatically if you open the door.

3. To restart, after door opening, close the

door and press the Start/Pause button

again.

Clean the lint filter at the end of every

drying cycle:

1. Open the door.

2. Pull the filter upwards.

3. Remove lint using a soft brush or your

fingertips.

4. Push the filter back into place.

If a fault occurs, before contacting our After-

Sales Service, make the following checks to

try and remedy the problem:

Drying takes too long / laundry is not

dry enough:

• Was the correct programme selected?

• Was the inserted laundry too wet (Washing

machine spin speed less than 800 rpm)?

• Is the lint filter dirty (filter indicator lamp on)?

The dryer does not operate:

(after a power failure and/or

interruption to the mains supply,

always press the Start button).

• Is the plug properly inserted into the

mains electricity socket?

• Is there a power failure?

• Has the fuse blown?

• Is the door well closed?

• Has the programme been selected?

• Has the start-delay option been selected?

• Has the

Start/Pause

button been pressed?

Lint filter indicator lamp on:

• Is the lint filter clean?

• Is the vent hose blocked?

All programme sequence indicators

blinking:

• Service call necessary.

Replacing the drum light bulb

(if supplied):

• If the inside lamp does not work, the bulb

may be faulty.

• Unplug the dryer.

• Open the door and unscrew the glass

cover insie the drum.

• Replace the faulty bulb with a new one

and screw the glass cover back on.

• Replacement bulb: Philips 15W, 230/

240V, E14.

If, after carrying out the above checks the

malfunction persists or appears again, turn

the dryer off and call our After-Sales Service

(refer to guarantee).

Please specify:

• The nature of the fault.

• The dryer type and model.

• The service code (the number after the

word Service on the adhesive rating

plate) on the right-hand side when the

door is open.

• Your full address and phone number.

PREPARING THE LAUNDRY

DRUM LIGHT OPTION

SELECTING A PROGRAMME & OPTIONS

STARTING & COMPLETING A

PROGRAMME

CHANGING A PROGRAMME

INTERRUPTING A PROGRAMME

DAILY MAINTENANCE & CLEANING

TROUBLESHOOTING GUIDE

AFTER-SALES SERVICE

Bauknecht TRAE 6569 Program Chart

Brand: Bauknecht

Model: TRAE 6569

Category: Tumble dryers

Type: Program Chart

Download PDF

report

Bauknecht TRAE 6569 Program Chart

Bauknecht TRAE 6569 Program Chart

Related papers

Other documents