PRODUCT SHEET
GB
GB
I
D F NL E P GR
DK
S N FIN
Refrigerator Compartment
1.
Crisper drawer
2.
Shelves / Shelf area
3.
Control panel
4.
Upper door tray
5.
Door trays
6.
Bottle rack
7.
Removable bottle restrainer (if present)
8.
Rating plate (at the side of crisper drawer)
9.
Light, positioned either below the control
panel or inside the appliance (depending on
model)
10.
Divider between Refrigerator
compartment and Cool Compartment, in
fixed position (if provided)
11.
Fan with filter (if provided), see relevant
instructions for filter
A
. Refrigerator Zone
B
. Compartment for storage of matured
cheese and cold cuts (if provided)
Notes
: The number of shelves and type of accessories may vary, depending on the model.
All shelves, door trays and racks are removable.
Important: Refrigerator accessories must not be washed in a dishwasher.
4
5
7
6
11
2
10
3
8
1
9
A
B
A
63501005GB.fm Page 1 Wednesday, March 14, 2007 4:33 PM
5019 635 01005
GB
I
D F NL E P GR
DK
S N FIN
Refrigerator compartment controls
(depending on the model)
A.
Thermostat knob.
B.
Green LED: indicates that the appliance is ON. If
the LED blinks, contact the After-sales Service.
C.
Fast Cooling button; the function switches off
automatically after approximately 6 hours.
D.
Fast Cooling function activated.
E.
Thermostat knob setting indicator.
A.
Display indicating the set temperature. If the
display indicating the set temperature blinks,
contact the After-sales Service.
B.
ON/OFF button.
C.
Temperature selection button.
D.
Fast Cooling button. The function switches off
automatically after approximately 6 hours.
E.
Fast Cooling function activated.
F.
Vacation” function activation button”: for
prolonged disuse.
G.
Vacation” function activation indicator”.
H.
“6th Sense” activation LED (blue), (if provided).
Indicates that the “6th Sense” function is active (see
paragraph “6th Sense function”).
The refrigerator can operate at ambient temperatures between +10°C and +38°C. Optimal performance is obtained
at temperatures between +16°C and +38°C.
Note
: Ambient air temperature, the frequency of door opening and the position of the appliance can affect the internal
temperatures of the refrigerator. These factors must be taken into account when setting the thermostat.
Removing the light bulb How to replace the light bulb
1.
Unscrew the light bulb as shown in the figure.
1.
Loosen the screw and remove the lamp cover.
2.
When replacing the bulb, bear in mind that this
appliance is fitted with a special bulb (15W with
bayonet fitting); to replace do not unscrew, but pull
towards the inside of the appliance (as indicated by
the arrow).
3.
Refit the lamp cover and secure it with the screw.
63501005GB.fm Page 2 Wednesday, March 14, 2007 4:33 PM
-
1
-
2
Ask a question and I''ll find the answer in the document
Finding information in a document is now easier with AI
Related papers
Other documents
-
Whirlpool ARC 2150W Program Chart
-
Whirlpool A 331/G/1 Program Chart
-
LADEN AM 2290 Program Chart
-
Whirlpool ARC 1796 Program Chart
-
Whirlpool ARC 1872/IX Program Chart
-
Privileg WME1821 XC Program Chart
-
Whirlpool WME14002 A++W Program Chart
-
Ignis NC 1838 W Program Chart
-
Whirlpool WM1875 A+X Program Chart
-