The infrared barrier consists of a transmitter and a receiver which are stored in a sealed

aluminium enclosure. The lens is horizontally adjustable to 90°.

The iGAZESR66HD photo eye features IP66 (NEMA 4) protection.

APPLICATIONS:

The infrared barrier system is suitable for the protection of automatic opening systems.

It can be used for security or as a safety device. Thanks to its sturdy enclosure, it is

ideal for industrial use.

)noitresni repmuj no gnidneped( CDV/CAV 42/21 :stnemeriuqer rewoP

)xr+xt( CAV 42 otAm 011:snoitprosbA

Operating temperature: 14°F to 140°F

seires ni yaler elbuod htiw CN dnaAN :tcatnoC

Max relay contact power: 1A to 24VAC (resistive load)

PACKAGING:

The package includes 1 Transmitter in a metal container and 1 Receiver in a metal container.

• The infrared barrier can be installed on any type of level structure and flat surface

• After separating the cover from the support base and removing the electronic circuit to avoid damaging it, attach the base to the wall

• Run the cables through using the special holes being sure to insert the cable glands for a proper hold

• Proceed with making the connections as shown in the attached figure

• Turn on the projector and the receiver and centre them; their alignment will be confirmed when the led on the receiver turns on

• Attach the cover onto the base, being sure that the hexagon socket head screws are firmly fixed so that the seals around are

This equipment must be used and installed in full compliance with the manufacturer's instructions and

current safety standards. The manufacturer cannot be held liable for eventual damages that may result from improper or unreasonable use.

Transmitter Solutions declares that the product is in conformity with EN12453 - EN 954-1

Orientation Closing the Photo Eye Dimensions

Connections

LED Power Signal